GIMP :: Layer Groups And Layer Modes / Opacity?
May 14, 2012
I just downloaded GIMP 2.8 (on Windows 7) and was using the layer groups to organize a project I'm doing. I noticed that whenever I put the layers into the layer group, nothing I do to them actually affects the image (for example if I change the opacity of the layer, it doesn't actually change). If I drag them out of the layer group they function perfectly; sometimes if I edit them and then drag them into the group they also work fine.
As I was writing this post I tested dragging a layer set to "dodge" into the group and it didn't work. It kept the dodge setting, but it looked as if it was on normal; however, I drug another layer set on dodge into the group and it worked fine.
Is this feature just broken on Windows, or does it not work like I thought (where you can drag them in and edit them individually, or edit them all by editing the layer group itself)?
View 4 Replies
ADVERTISEMENT
Jan 20, 2014
For the projects I'm working on, I use the same template beneath the different layer groups of each different project. When I move a "color" layer into the group, however, it doesn't show up like it's supposed to. It behaves as if the 'color' layer is a blank layer, and has no effect. Is there any way to get this to work or?...
ALSO: I can't open images by URL.
View 3 Replies
View Related
May 18, 2011
In the section "5.8 Practical Uses of Blending Modes" of the book "Grokking the GIMP" (see, e.g.,URL.... there is an example of how to use blending modes to alter the colour of a cat.
Specifically, I refer to Figure 5.29(a) where the re-coloured cat does not appear to sit naturally on the person's shoulder (cf Figure 5.26(a)). How can the defect be overcome? But would the bucket fill also be feathered?
View 1 Replies
View Related
Jan 1, 2012
I use adobe photoshop quite often and one thing that has always been a valuable tool is the ability to create a group or a layer set. Is this possible in GIMP or would I have to obtain a plugin to do this.
View 3 Replies
View Related
Nov 9, 2012
I have a image that has many layers that are grouped by folders and I've just exported it to .psd and after opening the exported file to check it, I see that the Group Layers cannot be opened. I've also tested this in an on-line Photoshop program (I can't install the actual Photoshop in my computer).
Adobe Photoshop CS be able to open the Group Layers and edit them?
View 4 Replies
View Related
May 6, 2012
How do you change the layer opacity?
View 1 Replies
View Related
Oct 25, 2012
I'd like to be to select a layer groups and copy them over to another pre-existing image.
I've been struggling with this for an hour or so, and I haven't found a way to do this.
Is is possible to do this in GIMP?
The closet I've found is a kind of paste where you do this: drag the tab of the origin image over to the tab of the target image. The result is a new layer in the target image called "dropped buffer". However, the entire origin image is imported flattened.
I've been trying other drag and drop operations, but without success. Usually when I drop the selection to the target image, the icon under the mouse dissapears, and nothing actually happens.
I thought this might be a window manager problem. But I get the same results across kde, gnome and xfce.
View 1 Replies
View Related
Dec 7, 2013
I have two objects intersecting each other on different layers. The object on the top layer I reduced the opacity for and the bottom layer which was previously hidden now is shining through. I do not want this to happen. I want the bottom layer to remain hidden beneath the top layer despite the lowered opacity. How would I accompish this simply? I have CS2.
View 6 Replies
View Related
Aug 21, 2013
I've been using Photoshop CS2 for several years to enhance my photographs, but just now have encountered something simple I cannot find out how to do. I have on the background layer a picture of a room interior with the exposure set mostly for the open window, but the rest of the room is very dark. On the only other layer, the upper one, I have the same shot exposed correctly for the room, which overexposes the window area. The upper and lower layers are perfectly superimposed, and the upper layer is at 100% opacity.
I have selected the window on the upper layer and want to change the selected area's opacity to blend properly with the window on the bottom layer without changing opacity of the rest of the layer. No matter what I do, changing opacity seems to affect only the entire layer, and I haven't figured out how to isolate the selected area for the opacity change.
I can cut the selection to reveal the darker window on the bottom layer, but this doesn't give me the flexibility I need to balance the two exposures. An opacity change would be ideal.
View 2 Replies
View Related
Apr 3, 2012
I have used Photoshop for years, but never in the capacity. I'm trying to blend layers together and then have the ability to save the top layer with the effects as its own layer. I'm sure that is not too clear so I have attached a screen shot.
Basically, have a B/W raster as a layer. Then I placed a smart object from Adobe Illustrator (a bunch of line vectors) on top of the raster. I then used my layers panel with a Screen option and I get the effect that I want. Where the line crosses a light area on the background it becomes light, and where it crosses a dark area it becomes dark (See Screenshot). Now what I want to be able to do is save my line layer as PSD document and not have the background layer on there.
If I flatten the layers, I obviously get the background layer. If I turn off the background layer, then I loose my screen effect.
This may be an easy fix, or impossible. I'm not sure.
View 8 Replies
View Related
Mar 19, 2003
Is there a way we can get like gradients of one layer mode to another. Or from normal to "overlay in a gradient fashion?"
View 1 Replies
View Related
Sep 5, 2013
Did Adobe do something to Illustrator CC that the layers with the same object colors are no longer blending. No matter what blend mode I apply the object never blends with the object with the same color behind it.
View 1 Replies
View Related
Nov 11, 2012
I have a PSD from a designer where they created icons using "darken" or "multiply" modes over a background, such as this:
However, since it will get on a CSS gradient, I need to extract the icons as a transparent PNG file, which of course gets me this in the web browser:
I can't just flatten it with the background, since the background is a gradient AND I need to be able to adjust the image's position in HTML. Also there, are several instances of this situation in the design. The best way to do this is to have a transparent PNG of each icon. But, how can I first get the artwork at least close to the way it appears in Photoshop (in darken mode over red)?
View 4 Replies
View Related
Oct 5, 2008
problems with the the blend modes in the "stroke" layer style, or am I doing something wrong?
right click on layer > blending options > stroke > blend mode
(position=inside)
I want to use "fill type"="gradient", but the blend modes do not even work with "fill type"=color. For both fill modes, the stroke does not let any pixels of the layer shine through, no matter what blend mode I choose.
I often use blend modes, for example "darken", etc. I know how they work, but somehow for the stroke layer style it seems not to work at all.
View 19 Replies
View Related
Oct 30, 2011
I am wondering if Xara supports layers in the same way as my other graphics programs. I am able to bring a bitmap into a layer over another bitmap layer and by applying a particular mode, lets say Overlay or Soft Light, it will change the appearance of the new layer. By doing this I build up new designs for digital papers.
View 7 Replies
View Related
Sep 11, 2013
When I try to move layers or groups under an open layer group, it ends up inside that group instead. For example:Drag Group 3 between Group 1 and Group 2. It ends up inside Group 2, below Layer 2.Drag Group 3 between Background and Group 1. It ends up inside Group 1, below Layer 1.The only workarounds are:Close the layer group.Use Cmd-[ to move it "down" once more.
It seems to me there should be a more intuitive way to move layers, based on the indentation of the groups. Dragging a layer on a divider in the green area should move it at the top level, above background.Dragging a layer in the blue area should move it inside Group 1.Dragging a layer in the magenta area should move it inside Group 2.
Dragging a layer in the orange area should move it inside Group 3.The appropriate section of the divider should highlight to indicate where the layer will end up (currently the entire divider is highlighted)
View 2 Replies
View Related
Mar 7, 2005
I'm making an image which has a lot of layers, so I wondered if it is possible to group a few layers so they appear as one layer? Merging them won't work, then the layer styles vanish,
View 6 Replies
View Related
Mar 21, 2012
I've created some graphic artwork in Photoshop RGB, and now its time to output these graphics to an Illustrator CMYK file.
I have a bunch of layers that I have created for lens flares / light effects and I created these via filling a layer black and then using the Lens Flare Filter and then converting the layer to a Screen layer blend.
I notice that when I convert to CMYK in photoshop I lose the effect of those screen layers, is there anyway I can get those layers to look the same in CMYK without having recreate them from scratch in the CMYK space?
In my illustrator file I have a gradient background and was hoping to bring in these transparent lens flare lighting effects to place over the top of the gradient. I was thinking I might be able to merge the layers in Photoshop but unfortunately I need those screen layers to remain transparent.
I also tried turning the layer to normal 100%, convert to CMYK, placing into my CMYK illustrator file and then changing the layer to screen mode there but its doesnt look the same, its turn transparent like I wanted but it looks like where there is transparency there is a 25% opacity white.
View 3 Replies
View Related
May 1, 2011
I have a GIF image that I need to add something to, but I don't want to add it to every single individual layer. Is there a way to add it over or behind the entire GIF so that it remains static while the GIF's frames cycle - like a watermark or something?
Or if not, is there maybe a script-fu that copies and merges a selected layer over every other individual layer automatically, without messing them up?
I know I'll probably have to just end up manually adding it to each layer, (so many layers...).
View 2 Replies
View Related
Feb 4, 2013
How do I make the edges of the top layer blend in with the bottom layer so you cannot tell that there is a line??? I want to make it look like a heart but I don't know how to smoothen the edges to make it look like it is part of the bottom layer so when I merge the layers there is no goofy lines looking like someone cropped another fire picture out...
fire3.xcf (Size: 489.68 KB / Downloads: 38)
View 6 Replies
View Related
Apr 16, 2013
I have two similar images where the subject has moved between the images. I have them in the same file as two separate layers and am using the subtract layer mode to identify where they differ, (roughly!).
I want to be able to use the subtract layer as a completely new layer so that I can make edits to it. The only way I have found to do this at the moment is to 'copy visible', but this still brings other elements that I don't want from where the layers overlap.
View 3 Replies
View Related
Jan 24, 2013
Is this possible with some keyboard shortcut? Seems like that should be possible...
View 2 Replies
View Related
May 5, 2013
Has created a 10 layer groups in Photoshop (there are multiple layers in the group layer.)
10 Photoshop layer groups
I try to save the JPG file to 10. How can I batch or automatically save?
View 2 Replies
View Related
Sep 26, 2007
How can color correction be applied to a GROUP of layers?
View 3 Replies
View Related
May 8, 2006
I was just wondering what the practical difference was between the Opacity of a layer and the transparency of a layer. They seem to have the same effect, but I reckon that Adobe wouldn't have seperated them for no good reason.
View 2 Replies
View Related
Aug 18, 2009
If I set a layer's opacity or layer fill opacity to be 50%, often I'll later realize that though it still looks to be a 50%, the setting now says 100%, meaning that I can't make it opaque again. What did I do wrong?
View 1 Replies
View Related
Sep 12, 2005
I am creating shadows for a large file, so my opacity is set to 50%. When I copy and paste shadows (such as or multiple windows to save time) they paste back at 100%. I have to constantly flip layers and change, and its very tedious. Plus, when I get to the point of flattening them all, if they are not all at 100% then whatever opacity they are at BECOMES 100%, so I cant change it again later.
View 8 Replies
View Related
Jun 7, 2013
Why can't I align a single layer that is inside a layer group? The align tool would always select the top most layer group as the 'boundary' for alignment, thus automatically selecting the whole layers inside of it and align them as a group.
Is this a bug or just GIMP's weakness? It definitely reduces the layer group's usefulness.
View 5 Replies
View Related
Dec 14, 2012
Long time gimp user, but for basic tasks only. Now I would like to get my hands dirty a little more. I'm trying to setup a workflow that involves CAD, Inkscape and GIMP. Basically I did some architectural drawing in CAD, used Inkscape to clean up and convert DXG into SVG, so that I can use paths into GIMP. I did a script that for every path creates a new transparent layer with a layer mask using the path, so I can add fills and textures quickly. Now to the problem: say I want to add a texture from another image, i paste the image into the appropriate layer, then I want to transform the texture a bit (scale, rotate and perspective). the result is that the layer mask is transformed, too. I tried to disable the mask during transform, but didn't work.
Is there a way to workaround this? maybe some layer mode instead of layer mask?
View 8 Replies
View Related
Nov 17, 2012
I have the latest gimp.
View 1 Replies
View Related
Sep 1, 2012
As I am using Layer Comps more frequently, i find myself frequently needing to toggle the visibility of layer groups, which contain several sub-groups. I tried all the shift + cmd + option - click variations, but none seems to do the trick.
here an example:
Visibility Type Name
OFF Group Row
ON Group Button 1
OFF Text Help!
OFF Shape Bg
ON Group Button 2
OFF Text Help Please!
OFF Shape Bg
so what i am looking for is a short-cut so that when i click on the visibility of the Group Row, it will turn on the visibility of all the layers contained.
View 3 Replies
View Related
