Has created a 10 layer groups in Photoshop (there are multiple layers in the group layer.)
10 Photoshop layer groups
I try to save the JPG file to 10. How can I batch or automatically save?
For the projects I'm working on, I use the same template beneath the different layer groups of each different project. When I move a "color" layer into the group, however, it doesn't show up like it's supposed to. It behaves as if the 'color' layer is a blank layer, and has no effect. Is there any way to get this to work or?...
ALSO: I can't open images by URL.
I just downloaded GIMP 2.8 (on Windows 7) and was using the layer groups to organize a project I'm doing. I noticed that whenever I put the layers into the layer group, nothing I do to them actually affects the image (for example if I change the opacity of the layer, it doesn't actually change). If I drag them out of the layer group they function perfectly; sometimes if I edit them and then drag them into the group they also work fine.
As I was writing this post I tested dragging a layer set to "dodge" into the group and it didn't work. It kept the dodge setting, but it looked as if it was on normal; however, I drug another layer set on dodge into the group and it worked fine.
Is this feature just broken on Windows, or does it not work like I thought (where you can drag them in and edit them individually, or edit them all by editing the layer group itself)?
When I try to move layers or groups under an open layer group, it ends up inside that group instead. For example:Drag Group 3 between Group 1 and Group 2. It ends up inside Group 2, below Layer 2.Drag Group 3 between Background and Group 1. It ends up inside Group 1, below Layer 1.The only workarounds are:Close the layer group.Use Cmd-[ to move it "down" once more.
It seems to me there should be a more intuitive way to move layers, based on the indentation of the groups. Dragging a layer on a divider in the green area should move it at the top level, above background.Dragging a layer in the blue area should move it inside Group 1.Dragging a layer in the magenta area should move it inside Group 2.
Dragging a layer in the orange area should move it inside Group 3.The appropriate section of the divider should highlight to indicate where the layer will end up (currently the entire divider is highlighted)
I'm making an image which has a lot of layers, so I wondered if it is possible to group a few layers so they appear as one layer? Merging them won't work, then the layer styles vanish,
View 6 Replies View RelatedIs this possible with some keyboard shortcut? Seems like that should be possible...
View 2 Replies View RelatedHow can color correction be applied to a GROUP of layers?
View 3 Replies View RelatedI have a image that has many layers that are grouped by folders and I've just exported it to .psd and after opening the exported file to check it, I see that the Group Layers cannot be opened. I've also tested this in an on-line Photoshop program (I can't install the actual Photoshop in my computer).
Adobe Photoshop CS be able to open the Group Layers and edit them?
As I am using Layer Comps more frequently, i find myself frequently needing to toggle the visibility of layer groups, which contain several sub-groups. I tried all the shift + cmd + option - click variations, but none seems to do the trick.
here an example:
Visibility Type Name
OFF Group Row
ON Group Button 1
OFF Text Help!
OFF Shape Bg
ON Group Button 2
OFF Text Help Please!
OFF Shape Bg
so what i am looking for is a short-cut so that when i click on the visibility of the Group Row, it will turn on the visibility of all the layers contained.
Just upgraded from CS5 to CC and I find some thing very very very annoying. Any transform operation on a layer group seems to be applied on the individual layers instead of the group as a whole. How can I turn this extremely useless behavior off?
View 5 Replies View RelatedIs there a way to change the functionality of the layers so that when a new layer is created or a layer is duplicated that it automatically is created below the selected layer? I always organize my files with elements at the top of the document at the top of the layers panel and have them in decending order (unless there is a reason for an object to be above another) so that it is easier to navigate the page. Right now this means I spend a lot of time moving layers up and down which gets rather annoying. I believe I saw at one point that there is a key command for duplicating a layer below the existing one, but I can't remember how anymore. ability to make a blanket change in preferences.
View 3 Replies View Relatedi am using autocad 2013 student version at home and at college i am using autocad 2012. so when i create drawing in 2013,dosent open on 2012"it says incompatible version". i like to save all my dwg files automatically in 2011 format, i dont want to click save as and change it 2011 format.what i need is whenever i finsh working on drawing, if click save it should automatically save in 2011 format.
View 2 Replies View RelatedPs CS6 v13.0.1
OS X 10.6.8
Layer Style presets seem not to function with Groups.
Unable to apply LS preset to Group.
(Able to apply LS preset to art layer.)
I’m trying to take several layers from a group, merge them, and export them into jpgs, then move on to the next layer group. Saving all the files in a new directory called "images" My layers are organized into groups, I’d also like to be able to have the script ignore layers that end with a specific character (or some other tag)
[URL]
This one exports the top visible layer(s) as a jpg with the same filename as the .PSD
<code>
function createFolder( folderObj ){ if( !folderObj.parent.exists ) createFolder( folderObj.parent ); if( !folderObj.exists ) folderObj.create(); }; function exportSFW( doc, saveFile, qty ) { var exportOpts = new ExportOptionsSaveForWeb( ); exportOpts.format = SaveDocumentType.JPEG exportOpts.includeProfile = true;//default false exportOpts.quality = qty; if ( saveFile.exists ) saveFile.remove( ); doc.exportDocument( saveFile, ExportType.SAVEFORWEB, exportOpts ); };
[code]....
I am using Photoshop CS6 and if I have nested layer groups whose depth is greater than 5 I get the following error message. "This document contains nested layer groups that may change in appearance if opened in applications older than Photoshop CS6".
I can click on "don't show this message again" before pressing ok, but can i disable it from showing somewhere in the application settings? I want to enable it sometimes and sometimes not.
- The "Reset All Warning Dialogs" button from Edit - Preferences - General is not very usefull because I want to keep other messages' settings, only this one should be affected.
I use adobe photoshop quite often and one thing that has always been a valuable tool is the ability to create a group or a layer set. Is this possible in GIMP or would I have to obtain a plugin to do this.
View 3 Replies View RelatedI have a GIF image that I need to add something to, but I don't want to add it to every single individual layer. Is there a way to add it over or behind the entire GIF so that it remains static while the GIF's frames cycle - like a watermark or something?
Or if not, is there maybe a script-fu that copies and merges a selected layer over every other individual layer automatically, without messing them up?
I know I'll probably have to just end up manually adding it to each layer, (so many layers...).
I'd like to be to select a layer groups and copy them over to another pre-existing image.
I've been struggling with this for an hour or so, and I haven't found a way to do this.
Is is possible to do this in GIMP?
The closet I've found is a kind of paste where you do this: drag the tab of the origin image over to the tab of the target image. The result is a new layer in the target image called "dropped buffer". However, the entire origin image is imported flattened.
I've been trying other drag and drop operations, but without success. Usually when I drop the selection to the target image, the icon under the mouse dissapears, and nothing actually happens.
I thought this might be a window manager problem. But I get the same results across kde, gnome and xfce.
How one would go about ungrouping all groups on an active layer with JavaScript?
View 5 Replies View RelatedFor the first month or so using PSP X4 I thought you couldn't open Properties and adjust blend ranges on entire layer groups, but it turns out I can if I open Properties from the menu. There is no context menu entry! What is with that, Corel? Minor UI issue but would be a nice inclusion.
View 6 Replies View RelatedI just discovered survey figure groups and am playing around with them. Great way to bring certain figures in & out. What seems crazy is that I have to check them on/off one at a time. Am I missing something or is this the only way to add figures to a figure group?
View 2 Replies View RelatedBeen trying to save files that are processed from Camera raw to tiff in CS 5 . The pop up window shows a different folder from where the just processed file was located. The preferences 'save file options is set(checked) 'Save as to orginal folder' Not sure what to do . After further tries I noted that the ' save as' dialogue indicates the saved folder is 'my documents' . This only occurs with files saved a Tiff or PSD . When a jpeg file is opened and then saved it is saved in the folder it originated from. Is this perhaps a windows 7 setup issue?
View 7 Replies View RelatedMy Problem in Photoshop CS5: Action is not running automatically while I trying to save PDF to JPG, in the batch process:
Followed following steps:
Opened PDF fileCreated new auction (F2)Flatten imageSave as JPGClose fileTo Run Batch:
Opened Batch dialogue boxSelected set/action nameSource: selected as “Folder”Directed location using “Choose” buttonAnd no selected any check boxes under the “Choose” buttonClicked “OK” Now all the PDFs are opened one after another but not execute the selected action.
The problem I've been noticing for a while now has been especially in OSX, now also on windows 7 is that whenever I have a PSD file open and go SAVE AS as a JPG alot of times I tend to do a batch from a single psd with different version.. ( name01.jpg name02.jpg name03.jpg etc.)
What I came across is that sometimes I tend to forget to select JPEG from the drop down menu (because the window always displays Photoshop File as default).
What happens is that Photoshop File is in the drop down menu and I name my file Name01.jpg it saves it as a Photoshop File with a .jpg extension. which confuses everyone that tries to open that file because they cant and its huge..
I remember on windows XP when this happened photoshop was kind enough to name my file Name01.jpg.psd which made the file stand out and approprietly named.
Aside from the whole .PSD .JPG issue with this not adding the appropriate extension automatically, this also causes problems when I name a file Name01 photoshop leaves it at that and does not add any extention to it so it becomes an orphan file on foreign computers.. It doesn't happen often but when it does I want to punch my computer in the face.
I'm sure I'm not the only one saving JPGs from Photoshop in large numbers that this happened to..
I was wondering if there was a way to divide and image into say 5x5 squares for example. And then save those selections into seperate files.
View 2 Replies View RelatedHow to automatically update a file in another folder that has the same name as the current file? (photoshop cs4-snow leopard)
View 3 Replies View RelatedPhotoshop opens automatically when I save any image from anyplace on the web and it is nerve racking! CS5 is the version. how to stop it from opening like that?
View 2 Replies View RelatedI regularly work on large Photoshop files with many layers and folders within folders and always have the problem moving a folder only to find that somewhere inside there was a layer with an unlinked mask and it gets left behind. Is there a way i can 'relink all layer masks' without having to manually go through and relink them all? Similar to the 'Close all folders' option i guess...
View 1 Replies View RelatedDoes anyone know how (or if its possible) to scale a layer with layer effects (scaling the layer effects settings as well)?? My problem is I have a logo with multiple layer effects done to it. I now need to transfer that logo onto other sized documents. When I do that and try to scale it all of my settings do not scale with it. ie. a 5pt stroke effect on the logo stays at 5pt even though the logo is now huge! I can not rasterize the layer, I need to keep the sharpness for high end printing.
View 3 Replies View RelatedI found a photoshop file somewhere on the net and the really fascinating ting about it was one of its gradient layers. I has a behavior I have never come across yet, because whenever you remove certain parts of the layer mask, i.e. paint the bottom half black for example, photoshop adjusts the gradient to the remaining opaque part of the layer.
View 1 Replies View RelatedEverytime I crete a box etc of a shape layer a layer I used previously is being applied to that layer automatically? Can someone help. It has to be a simple thing I am not aware of.
View 1 Replies View Related