Photoshop :: Save As - Extensions Not Automatically Added
Mar 9, 2012
The problem I've been noticing for a while now has been especially in OSX, now also on windows 7 is that whenever I have a PSD file open and go SAVE AS as a JPG alot of times I tend to do a batch from a single psd with different version.. ( name01.jpg name02.jpg name03.jpg etc.)
What I came across is that sometimes I tend to forget to select JPEG from the drop down menu (because the window always displays Photoshop File as default).
What happens is that Photoshop File is in the drop down menu and I name my file Name01.jpg it saves it as a Photoshop File with a .jpg extension. which confuses everyone that tries to open that file because they cant and its huge..
I remember on windows XP when this happened photoshop was kind enough to name my file Name01.jpg.psd which made the file stand out and approprietly named.
Aside from the whole .PSD .JPG issue with this not adding the appropriate extension automatically, this also causes problems when I name a file Name01 photoshop leaves it at that and does not add any extention to it so it becomes an orphan file on foreign computers.. It doesn't happen often but when it does I want to punch my computer in the face.
I'm sure I'm not the only one saving JPGs from Photoshop in large numbers that this happened to..
View 3 Replies
ADVERTISEMENT
Dec 4, 2008
I have added about 30,000 extensions just to have a nice healthy choice of design options; however, now PS takes about 5 minutes to load. Since the .atn, etc. files have to be placed in the Presets area of the local installation in order to be loaded into the various palettes,
View 20 Replies
View Related
May 3, 2013
The 'save as' option is now limited to .jpg and photoshop in vaious form. The only photoshop file my After Effects will accept id .psd
View 3 Replies
View Related
Sep 16, 2013
I had Lightroom 4 and had a problem that when importing any photos it would add the keyword "Otters" to all photos automaticlly. I now have Lightroom 5 and the same problem still exists. Where can I find how to change this? Have looked but can't find anywhere.
View 4 Replies
View Related
Mar 19, 2013
I work in publishing and convert hundreds of jpgs into tifs each month. In CS6 under save-as when I click on format> tif, I loose the end of my file name.
Eg Figure 8.7.jpg goes to Figure 8.tif >loosing the last part of the filename.
When I have a big list of files to run through, I need the saving process to be as quick as possible without having to alter the file name manually. Why this is happening, it was fine on CS3!
View 12 Replies
View Related
Jun 7, 2012
When I select save as after editing a file brouight in as a PSD or RAW file if I choose TIFF as the file type the extension appended is PNG. If I choose JPEG the extension is esd. I just updated to be sure I have the latest version.
The connection between finder and photoshop doesn't seem to be working right. Another example being when I choose to open a file the menu that opens requires me first to select the type of file I want to import before it will allow me to select a file type. There is no default.
View 3 Replies
View Related
Feb 7, 2013
My quest: if your in a different layer working on adding walls for eg. You want add a dimension to that wall. When I hit DLI, How do I make sure that the dim i just entered goes directly to the DIM layer instead of the wall layer.
View 3 Replies
View Related
Mar 19, 2013
My company has been using Designer 9 for years and we have thousands of drawings done in it. We have upgraded to X5 recently and I have noticed every time I open a file that has arrowheads it adds them to the list in X5. So my choice of arrowheads in X5 now is in the hundreds. I am wondering if there is a way to stop X5 from automatically adding new arrowheads to the list each time I open a new drawing. I have two sizes of arrows I want listed and nothing else.
View 1 Replies
View Related
Sep 19, 2013
I'm trying to gauge interest / opinions in this AutoCAD add on for automatically binding and PDFing drawings ready for issuing - it also adds the revision to the file name.
[URL]
View 3 Replies
View Related
Sep 13, 2012
I used to be able to just open any image and my copyright info would be inserted into the file data. I guess it was a droplet, "when the file is opened or created then add file info from a xmp file". I still have the xmp file with all the data in but i am unsure how to implement it being automatically opened and added to the file when i create a new one? I thought i could handle it, i assume its a droplet of some sort.
View 5 Replies
View Related
Mar 25, 2011
in CS5 we can use the count tool but How do we save that image with the numbers added?
View 8 Replies
View Related
Jan 15, 2013
When I save a jpg, this stupid programme adds "edited" to the file name. How to get rid of this foolish thing.
View 9 Replies
View Related
May 25, 2012
i am using autocad 2013 student version at home and at college i am using autocad 2012. so when i create drawing in 2013,dosent open on 2012"it says incompatible version". i like to save all my dwg files automatically in 2011 format, i dont want to click save as and change it 2011 format.what i need is whenever i finsh working on drawing, if click save it should automatically save in 2011 format.
View 2 Replies
View Related
Aug 22, 2012
Been trying to save files that are processed from Camera raw to tiff in CS 5 . The pop up window shows a different folder from where the just processed file was located. The preferences 'save file options is set(checked) 'Save as to orginal folder' Not sure what to do . After further tries I noted that the ' save as' dialogue indicates the saved folder is 'my documents' . This only occurs with files saved a Tiff or PSD . When a jpeg file is opened and then saved it is saved in the folder it originated from. Is this perhaps a windows 7 setup issue?
View 7 Replies
View Related
May 5, 2013
Has created a 10 layer groups in Photoshop (there are multiple layers in the group layer.)
10 Photoshop layer groups
I try to save the JPG file to 10. How can I batch or automatically save?
View 2 Replies
View Related
Apr 3, 2013
My Problem in Photoshop CS5: Action is not running automatically while I trying to save PDF to JPG, in the batch process:
Followed following steps:
Opened PDF fileCreated new auction (F2)Flatten imageSave as JPGClose fileTo Run Batch:
Opened Batch dialogue boxSelected set/action nameSource: selected as “Folder”Directed location using “Choose” buttonAnd no selected any check boxes under the “Choose” buttonClicked “OK” Now all the PDFs are opened one after another but not execute the selected action.
View 5 Replies
View Related
Jun 1, 2004
I was wondering if there was a way to divide and image into say 5x5 squares for example. And then save those selections into seperate files.
View 2 Replies
View Related
Apr 28, 2012
How to automatically update a file in another folder that has the same name as the current file? (photoshop cs4-snow leopard)
View 3 Replies
View Related
Sep 13, 2013
Photoshop opens automatically when I save any image from anyplace on the web and it is nerve racking! CS5 is the version. how to stop it from opening like that?
View 2 Replies
View Related
Apr 12, 2013
Whenever I save out a TIFF file it automatically resizes the image down to 300 ppi. What setting is this so I can uncheck it?
View 8 Replies
View Related
Feb 9, 2012
is there a way i can save idw to autocad dwg automatically without opening idw from inventor one by one and saving it as autocad dwg?
View 8 Replies
View Related
Oct 15, 2012
Is it possible to have Gimp remember your settings from one invocation to the next? I get kinda tired of changing the pencil width from 20 pixels to 1 pixel each time I start it.
View 2 Replies
View Related
Dec 31, 2013
I'm editing a lot of files for web publishing. These files need to be saved as PNG files but I would like to be able to quickly keep a copy of the PDN file so that I can quickly edit the files if needed since I can't save an image with layers to a PNG without flattening first.
Is there a plugin that allows me to quickly do this? Perhaps a checkbox on the Save As... dialog to automatically save a copy of the file as a PDN to a designated location? Having to manually save each file twice is quite tedious.
View 8 Replies
View Related
Aug 26, 2013
Each time I use the "save as" for a file (any extension) it's closed by default, replaced by the the saved file. Because I use a .pdn file as a base to create many .jpg files I would like the file I just "saved as" not to be close automatically. Otherwise I have to open it again via "recent files..."
View 16 Replies
View Related
Nov 20, 2012
In my quest to remove any unnecessary clicks I want to be able to set the default location when you press Save, Save As, Demote or 'Save and replace component'.
Default it will show up a file save as dialogue starting from my workspace. Or my last saved location. I believe this is stored in the registry and hope to Intelligent adjust these registry value's using VBA.
When diving into the registry I believe I found the right keys here:
HKEY_CURRENT_USERSoftwareAutodeskInventorRegistryVersion17.0SystemPreferencesFileDialog
Problem 1:
- if i change them manually I don't find a difference in Inventor (If I change other things in the registry, this has an effect)
Problem 2:
how do I set them automatic using VBA? I've got the strings sFileLocation & sFileName true the rest of my code. So I would need to do something like:
Dim oRegFileSave as Regisry entryset oRegFileSave as
HKEY_CURRENT_USERSoftwareAutodeskInventorRegistryVersion17.0SystemPreferencesFileDialogLastFileSaveDialogoRegFileSave = sFileLocation & "/" & sFileName
For your information, these are the registry entry's I believe I need to adjust:
View 5 Replies
View Related
Aug 23, 2013
Seeing if there is a option/3rd party plug in where it will save a dwf(x) along with the inventor files - WITHOUT using vault.I'm Currently using Inventor 2013.
View 1 Replies
View Related
Jan 30, 2014
Why won't LR5 save my original RAW imports from D7100. I can import them and process them but the originals are then lost. What am I doing wrong? With every other camera the original RAW image is saved in the library.
View 11 Replies
View Related
Feb 24, 2013
In older versions of PSP, auto-save would automatically save a copy of the work in progress every X minutes (depending on what was set by the user) and overwriting the previous version, including the original if not working on a copy of it.
In PSPX4, auto-preserve added the functionality of saving a copy of the original to avoid overwriting it, but it also has autosave setting.
Questions :
- what does the autosave do except save the image when changing from Edit to Manage to Adjust?
- does autosave automatically save a copy (even if overwriting) of the work in progress?
- if so, where do we set how frequently a save should be?
View 3 Replies
View Related
Mar 24, 2014
I started at a company and I have a computer with CS6, while everyone else in the office has cs5.
View 1 Replies
View Related
Apr 24, 2013
I got this workflow,
1) From LR export to PS
2) Do all essential editings.
3) Save. File become 'xyz.tiff' now. (I want to keep this as master copy)
4) Crop to 4r, Save a Jpeg copy as 'xyz 4r.jpg'
5) PS save it as a copy, but do not automatically open the Jpeg copy. The tiff remains opened. I have to manullay Open, browse to it, and open the Jpeg. The 'Open Recent' list also do not list 'xyz 4r.jpg'.
6) Do 4r sharpening for the 'xyz 4r.jpg', save it.
Basically the files I want to keep and worked on is like this: NEF -> xyz.tiff -> xyz 4r.jpg -> xyz sml.jpg(maybe)
Now, it there a way in step (5) to have PS save the JPEG copy, and automatically open it? I don't care if the Tiff copy remains opened or not, I am done with it.
View 9 Replies
View Related
Oct 16, 2013
I cannot get pscc to access servers to download extention not even Kuler, i am trying to add on album DS
View 1 Replies
View Related
