I have a image that has many layers that are grouped by folders and I've just exported it to .psd and after opening the exported file to check it, I see that the Group Layers cannot be opened. I've also tested this in an on-line Photoshop program (I can't install the actual Photoshop in my computer).
Adobe Photoshop CS be able to open the Group Layers and edit them?
For the projects I'm working on, I use the same template beneath the different layer groups of each different project. When I move a "color" layer into the group, however, it doesn't show up like it's supposed to. It behaves as if the 'color' layer is a blank layer, and has no effect. Is there any way to get this to work or?...
ALSO: I can't open images by URL.
I just downloaded GIMP 2.8 (on Windows 7) and was using the layer groups to organize a project I'm doing. I noticed that whenever I put the layers into the layer group, nothing I do to them actually affects the image (for example if I change the opacity of the layer, it doesn't actually change). If I drag them out of the layer group they function perfectly; sometimes if I edit them and then drag them into the group they also work fine.
As I was writing this post I tested dragging a layer set to "dodge" into the group and it didn't work. It kept the dodge setting, but it looked as if it was on normal; however, I drug another layer set on dodge into the group and it worked fine.
Is this feature just broken on Windows, or does it not work like I thought (where you can drag them in and edit them individually, or edit them all by editing the layer group itself)?
I use adobe photoshop quite often and one thing that has always been a valuable tool is the ability to create a group or a layer set. Is this possible in GIMP or would I have to obtain a plugin to do this.
View 3 Replies View RelatedI'd like to be to select a layer groups and copy them over to another pre-existing image.
I've been struggling with this for an hour or so, and I haven't found a way to do this.
Is is possible to do this in GIMP?
The closet I've found is a kind of paste where you do this: drag the tab of the origin image over to the tab of the target image. The result is a new layer in the target image called "dropped buffer". However, the entire origin image is imported flattened.
I've been trying other drag and drop operations, but without success. Usually when I drop the selection to the target image, the icon under the mouse dissapears, and nothing actually happens.
I thought this might be a window manager problem. But I get the same results across kde, gnome and xfce.
When I try to move layers or groups under an open layer group, it ends up inside that group instead. For example:Drag Group 3 between Group 1 and Group 2. It ends up inside Group 2, below Layer 2.Drag Group 3 between Background and Group 1. It ends up inside Group 1, below Layer 1.The only workarounds are:Close the layer group.Use Cmd-[ to move it "down" once more.
It seems to me there should be a more intuitive way to move layers, based on the indentation of the groups. Dragging a layer on a divider in the green area should move it at the top level, above background.Dragging a layer in the blue area should move it inside Group 1.Dragging a layer in the magenta area should move it inside Group 2.
Dragging a layer in the orange area should move it inside Group 3.The appropriate section of the divider should highlight to indicate where the layer will end up (currently the entire divider is highlighted)
I'm making an image which has a lot of layers, so I wondered if it is possible to group a few layers so they appear as one layer? Merging them won't work, then the layer styles vanish,
View 6 Replies View RelatedIs this possible with some keyboard shortcut? Seems like that should be possible...
View 2 Replies View RelatedHas created a 10 layer groups in Photoshop (there are multiple layers in the group layer.)
10 Photoshop layer groups
I try to save the JPG file to 10. How can I batch or automatically save?
How can color correction be applied to a GROUP of layers?
View 3 Replies View RelatedAs I am using Layer Comps more frequently, i find myself frequently needing to toggle the visibility of layer groups, which contain several sub-groups. I tried all the shift + cmd + option - click variations, but none seems to do the trick.
here an example:
Visibility Type Name
OFF Group Row
ON Group Button 1
OFF Text Help!
OFF Shape Bg
ON Group Button 2
OFF Text Help Please!
OFF Shape Bg
so what i am looking for is a short-cut so that when i click on the visibility of the Group Row, it will turn on the visibility of all the layers contained.
Just upgraded from CS5 to CC and I find some thing very very very annoying. Any transform operation on a layer group seems to be applied on the individual layers instead of the group as a whole. How can I turn this extremely useless behavior off?
View 5 Replies View RelatedPs CS6 v13.0.1
OS X 10.6.8
Layer Style presets seem not to function with Groups.
Unable to apply LS preset to Group.
(Able to apply LS preset to art layer.)
I’m trying to take several layers from a group, merge them, and export them into jpgs, then move on to the next layer group. Saving all the files in a new directory called "images" My layers are organized into groups, I’d also like to be able to have the script ignore layers that end with a specific character (or some other tag)
[URL]
This one exports the top visible layer(s) as a jpg with the same filename as the .PSD
<code>
function createFolder( folderObj ){ if( !folderObj.parent.exists ) createFolder( folderObj.parent ); if( !folderObj.exists ) folderObj.create(); }; function exportSFW( doc, saveFile, qty ) { var exportOpts = new ExportOptionsSaveForWeb( ); exportOpts.format = SaveDocumentType.JPEG exportOpts.includeProfile = true;//default false exportOpts.quality = qty; if ( saveFile.exists ) saveFile.remove( ); doc.exportDocument( saveFile, ExportType.SAVEFORWEB, exportOpts ); };
[code]....
I am using Photoshop CS6 and if I have nested layer groups whose depth is greater than 5 I get the following error message. "This document contains nested layer groups that may change in appearance if opened in applications older than Photoshop CS6".
I can click on "don't show this message again" before pressing ok, but can i disable it from showing somewhere in the application settings? I want to enable it sometimes and sometimes not.
- The "Reset All Warning Dialogs" button from Edit - Preferences - General is not very usefull because I want to keep other messages' settings, only this one should be affected.
For the last few weeks I have been having problems with my photoshop. One day I opened it and all the layer styles (6 gigs worth) were just gone. No one knew how to restore them here so I did them all over again and saved 3 sets at 2gigs each. Now every single time I open Photoshop I don't have any layer styles and have to load them. I updated just now from CS5 to CS6 and the same thing.. I have opened and closed CS6 4x now and each time all my layer styles vanish upon opening.
View 3 Replies View Relatedhow I can put my layers into groups now, but there are a few problems I've seen pop up.
First are foremost, when I disable the visibility on a group, if I use the move tool it will select layers from that group that were visible before the group was made invisible. Seriously, there is absolutely no reason whatsoever that I would ever want to move an individual layer that I can't see. This clearly is a glitch and needs to be fixed.
Second of all there is an issue with a layer's mode when it is in a group. For example, if a layer is set to multiply, if it is set in a group it will only multiply on layers within that group. Now this I can see a good use for, but honestly, it is not how I usually want to use layers. I'm not usually trying to separate the actual graphics in my image, I'm just trying to organize my massively long layer dialogue into something more useful. It's great to collect different aspects of my image and keep them all together. But basically every time I need a multiply layer or other effect, I need it to effect the whole image. To keep it effecting an entire image I have to make two separate groups, each above and below the layer, in order to organize my image.
Now, since there is certainly an advantage that could be given by not having such layers have any effect outside of their group, I can't argue that the feature should be removed. However, I do think it would be fantastic if a property could be added to a layer group that would allow for such layers to effect the image outside of the group or not.
The third thing I have to say about groups is linking. First of all, as it stands, when I activate linking on a layer group it has absolutely no effect, making the option redundant. However, what would be useful is if I could link an entire group to itself and then move every layer within a group in tandem.
Often times I want to move several groups of layers around so I can arrange a composition. For a simple example, maybe I have several images of characters, each built with a layer for flats, lighting, textures, etc. And to arrange the composition I want to move the whole character with all its layers to one spot, then grab another character with all of its layers to another spot.Conventionally, there are only two ways I can do this. Either I flatten each of those groups and move them as single layers, destroying my ability to alter them with any level of convenience, or I have to manually link every layer for that character, move it, un-link every layer, link all the layers in another character, and repeat.But it would be so much nicer if I could link all the layers within several groups, and move each group as a whole without moving any other layers.
Since the link option on a layer group doesn't do anything anyway, it seems reasonable to me that enabling it should have that exact effect. Using the same example, if I have each character in its own group, I activate the link option on all of those groups all at once, and then I can grab a layer on any group and that whole group will move, but not any other layers.Even if it automatically linked all the layers in that group to all other linked layers, it would still be much easier to activate and deactivate the link on just one group each time I move that one group, rather than each individual layer.
How one would go about ungrouping all groups on an active layer with JavaScript?
View 5 Replies View RelatedFor the first month or so using PSP X4 I thought you couldn't open Properties and adjust blend ranges on entire layer groups, but it turns out I can if I open Properties from the menu. There is no context menu entry! What is with that, Corel? Minor UI issue but would be a nice inclusion.
View 6 Replies View Relatedi have my layer named in Chinese in max 2012,and i opened the same file in max 2013, and the layer name got garbled?is this a bug or how do i fix it?
View 2 Replies View RelatedI just discovered survey figure groups and am playing around with them. Great way to bring certain figures in & out. What seems crazy is that I have to check them on/off one at a time. Am I missing something or is this the only way to add figures to a figure group?
View 2 Replies View RelatedI am trying to save a cs6 illustrator file as a pdf. When it opens it only shows one layer. I've checked create layers from top level layers.
View 4 Replies View RelatedI have done a drawing on my auto cad 2011 on windows and when i open it up on my auto cad 2011 for mac it only shows one layer in model space all the layers are on and thawed. how can i get the rest of my drawing to show up?
View 2 Replies View RelatedOS: Windows XP
Gimp v 2.8
Not sure when this started happening since the last time I used Gimp was about a week or so ago and everything was fine at that point... Now when I open these ".xcf" files I've been working on in Gimp I see this strange Blue Scribble that is showing in the same location for pretty much all the xcf files I opened.
I went through every layer in the "Layers" window and made each one NOT visible in an attempt to see if it was something on one of the layers, but it remained there even after ALL layers were no Longer visible. I also created a new xcf file, saved it, then re-opened it in Gimp and NO scribble was there...
If I export one of the files showing the Blue Scribble into any other format and then re-opened it in Gimp the Blue Scribble is gone too.
I just learned (after 16 years...) that it's been possible to drill down through successive compound objects within groups without using the new V7 feature "Edit inside".
I'd always used Ctrl+Click within a group to select the object in it I want, but could never select just a group that was within--only a single object. But apparently Ctrl+Click is only intended to select the bottom-most (leaf) object of the group (tree). If instead you use Ctrl+Alt+Click, you can click through each level of a group.
So for example if you made two groups of 3 objects and then grouped the two groups together, you can select the whole group first, then one of the other groups within, then one of the objects within that group.
I can't believe I didn't know this. Shows what I know. And what amazes me more is that I didn't figure it out given that you can Alt+Click to select through overlapping objects.
I am trying to open Lightroom 4 from my desktop and it keeps giving me this message:The Lightroom catalog named "Lightroom 4 Catalog" cannot be opened because another application already has it opened.
View 1 Replies View RelatedI have a GIF image that I need to add something to, but I don't want to add it to every single individual layer. Is there a way to add it over or behind the entire GIF so that it remains static while the GIF's frames cycle - like a watermark or something?
Or if not, is there maybe a script-fu that copies and merges a selected layer over every other individual layer automatically, without messing them up?
I know I'll probably have to just end up manually adding it to each layer, (so many layers...).
How do I make the edges of the top layer blend in with the bottom layer so you cannot tell that there is a line??? I want to make it look like a heart but I don't know how to smoothen the edges to make it look like it is part of the bottom layer so when I merge the layers there is no goofy lines looking like someone cropped another fire picture out...
fire3.xcf (Size: 489.68 KB / Downloads: 38)
I have two similar images where the subject has moved between the images. I have them in the same file as two separate layers and am using the subtract layer mode to identify where they differ, (roughly!).
I want to be able to use the subtract layer as a completely new layer so that I can make edits to it. The only way I have found to do this at the moment is to 'copy visible', but this still brings other elements that I don't want from where the layers overlap.
Why can't I align a single layer that is inside a layer group? The align tool would always select the top most layer group as the 'boundary' for alignment, thus automatically selecting the whole layers inside of it and align them as a group.
Is this a bug or just GIMP's weakness? It definitely reduces the layer group's usefulness.
Long time gimp user, but for basic tasks only. Now I would like to get my hands dirty a little more. I'm trying to setup a workflow that involves CAD, Inkscape and GIMP. Basically I did some architectural drawing in CAD, used Inkscape to clean up and convert DXG into SVG, so that I can use paths into GIMP. I did a script that for every path creates a new transparent layer with a layer mask using the path, so I can add fills and textures quickly. Now to the problem: say I want to add a texture from another image, i paste the image into the appropriate layer, then I want to transform the texture a bit (scale, rotate and perspective). the result is that the layer mask is transformed, too. I tried to disable the mask during transform, but didn't work.
Is there a way to workaround this? maybe some layer mode instead of layer mask?