I made the switch from acad 2006 to 2014. I was able to add quick leader to my dimension menu in customize user interface, but I don't have an icon in my dimensions toolbar. I figured it out, I needed to customize toolbars also, not just menus.
View 0 RepliesI created my own workspace from Map Classic Workspace and created my Toolbars (like in 2011).My new Workspace is default and current yet every time I open Map 3d 2012 I still get Express ribbon.
I already closed every ribbon in Customize User Interface and saved again but then I get this message: The Ribbon does not have any tabs or panels currently loaded. When I choose My workspace even if it is already default, ribbon disappears.
I want to change the CTRL+Backspace hotkey but I can't find the command in "Customize User Interface".
View 2 Replies View RelatedIs there anyway to add a tool palette into a work space using the customize user interface?
View 2 Replies View RelatedI'm trying to adjust the colour of my grid using the "Xustomize User Interface" dialog.
in Elements - Grids, I can only adjust the minor gridlines using "Set by intensity", or the major gridlines (0,0) using "set by color". There doesn't seem to be a way to adjust both elements independantly unless I'm missing something.
Where can I find a good document on how to customize the interface in AutoCAD 2012?I need to add an extra menu, palettes , custom text sizes...etc
View 3 Replies View RelatedI use Quick Properties in static mode mostly for counting objects and quickly seeing the length of lines and polylines. These lengths are listed in feet and inches. Would it be possible to add an additional length item to the quick properties menu which shows the inches/decimal length? Would be awesome as I wouldn't then have to do the math to convert to inches.
View 3 Replies View RelatedHow can I avoid getting zeros when creating dimension line with quick dimension command. the Zeros indicates the line itself. how it can be avoided?
View 5 Replies View RelatedOn some computers I have a problem. The down arrow at the right of the quick access toolbar doesn't show. I checked that my interface is not lock too. So to customize the quick access toolbar I have to use the CUI.
I don't know if it's related, but my customize toolbar (from my partial menu) have to be displayed manually each time I start AutoCAD but not my custom tab in the ribbon.
it's possible to quote with quick leader and have the z value in text
View 1 Replies View RelatedMy preferred method of utilizing commands such as move, copy group etc. is to select the entities to be moved, copied or grouped then select the appropriate tool and proceed. Recently my computer has decided it wants me to select the appropriate tool prior to selecting the entities to be manipulated. I can not figure out how to get this program to return to the method I am most accustomed to??
View 1 Replies View RelatedI can't reset the quick leader to its default value. I used to have a custom tool bar for that using the following command: (setvar “Dim DRBLK” “.”), and it worked greate. Now this command does not work with C3D 2012.
Now I'm stuck with the dot leader and I want to reset it back. I use dot and arrow head a lot.
How to switch from the Ribbon interface to the Classic interface in inventor 2012? It is not in the same place as in inventor 2011. This ribbon interface just don't do it for me.
View 6 Replies View RelatedFor some reason, some fluid elements of my autocad interface are all aligned to right:
[URL]........
As you can see, the command suggestion box is on the right. I don't know where is the setting to get them back to left.
I have no issues when using autocad for simple 2d drafting, layers and commands seem straightforward enough, but I am having real difficulty with the 3d interface when set up with 4 viewports, similar to Rhino (top, front, right and perspective)
Question #1: can I link the viewports so that moving around in 1 moves the other simultaneously to the same zoom and location?
Question #2: can I set up the MButtonPAN (or similar for orbit) command to orbit ONLY when in a perspective viewport? (in rhino, the right mouse button always orbits in a perspective viewport, and pressing shift with right mouse button can pan, ideally this is what I need or some variant of it). It seems very cumbersome to have to use the orbit button every time I want to adjust my perspective view!
Basically I want to make my workflow as similar to Rhino as possible, as it has become deeply engrained, and so far the crossover is not going well.
When I opening any of the drawing using File Dialogue in my c# application, user interface is getting minimized. How can I set User Interface to top level in any of the drawing ?
View 3 Replies View RelatedIn AutoCAD 11 the right click pop-up has clipboard and an arraow you need to slide on to get to the copy, paste, paste as block, copy with base point...Older versions had these clip board features in the pop-up and I hate having one more step to get to the clipboard features. Is there way to customize what shows up with right click?
View 3 Replies View RelatedI am able to create my own leader style, a loop, similar to the "dot blank" option that ACAD provides.
However, as with any leader style, once you pick the starting point of your leader you must extend it a certain length in order for the arrow, dot, slash, etc. to appear. This is a draw back in tight spaces where you are trying to fit the leader and the subsequent text.
Basically I would like to know if there is a setting that will allow me to pick the starting point of the leader and have the shortest length of leader line while still showing the "arrowhead".
I realize I can scale down the arrowhead type to give me more space. I realize I can explode the leader and shorten the line portion of the leader. I realize I can create a block of a "leader" that will give the appearance that I am looking for.
However, these are last ditch options if there is no solution.
I can't get access to the tools at the bottom shown in this screen shot.It is actually at the bottom of the row below the Links option that is cut off. So I can't attach the chin to the head!
View 7 Replies View RelatedPhotoshop is THE ONLY application that's missing the sweet slider to darken/brighten the user interface. I just discovered that even Illustrator CS4 has this ability, Premiere does, After FX does, so, what's the point? Why can't I darken Photoshop a bit? I think it's a bit more crucial to darken the UI in Photoshop than it is in Illustrator, as you're more likely to perform very sensitive color corrections in Photoshop and anything bright stands in your way,
View 8 Replies View RelatedI was working on a Picture, when I realized that something is missing. Now I figured out whats wrong.I am missing the "Done" button while croping a photo and the compare button ( Y | X ). I don't know how to describe it better but I hope you can see what my problem is. I have no clue how to get the bar back to my user interface
View 2 Replies View RelatedPS11 and the EXACT same problems in PS9. This image shows the black on black problem of many drop-down menus. It doesn't affect all drop-down menus but it affects ALL font-related drop-down menus, and, for example, the adjustsments panel (but others also). Some drop-downs are fine (white on black, as it should be). Some aren't.
Backstory:
A catastrophic UI flaw if ever there was one. I use "catastrophic" because that's an error message I got from Acrobat 9 PX after I had a run in with the FlexSPY monitor Adobe uses on its software, when it didn't let me use Acrobat until I reformatted. The Acrobat 9 dialog said it can't proceed because it had a catastrophic error, and then the number 142:20.
I have customized a standard user profile Sam in my win 764 XDP7 interface. (added buttons, etc)
Is it possible to export/save that interface and pull it into the program and use the interface when I "Run As Administrator"? Or do I need to just spend time rebuilding?
As a User, when I work with a web site file, I have to republish locally all pages every time I open the file. It does not remember where I stored my preview. I am hoping that by running as administrator that will no longer be necessary. (My website file built in XWD6 moved to XDP6 and moved to XDP7 ends in .xar not .web)
I've just reformatted my PC and reinstalled Xara Pro 6. I used to have it set for the light background as it's easier for my eyes. I can't remember how I did this, how to change the program background colour from dark to light?
View 9 Replies View Relatedm using max 2011 on xp 64 bit platform from last 7 month ...but yesterday,i gave for rendering n its got hung, after restarting the max its get stuck at just before user interface loading.. n it wont show in task manager applications window but it appears in processes window n uses 15% memory.
i tried re-installing but problem remains the same even with max 32 bit version......
i have max 9 in my system which works properly.......but not max 11
system config:
windows xp 64 bit sp2
AMD Phenom II x6 1055T Processor,
8.0GB RAM,
NVIDIA GeForce GT 220
I would liketho know how it is done / is there a command for that, lisp.
View 1 Replies View RelatedI tried chaning the settings in the Preferences Panel
View 6 Replies View RelatedI am wanting to change the current greys to the blue backgrounds that used to be the default. I emailed Gary and he said to ask this forum, so here I am asking this forum. He said that it was a keyboard command to change it to an older version. So I am asking what are the keyboard command(s) to change the gray look to the blue look of old.
View 4 Replies View RelatedI installed 2014 on a Mac Tower (fairly new) and a Macbook Pro (very new) and this same thing has happened to both. After Clean installs and the usual trashing of prefs. I looked at the mel code for the error message I have been getting..
The problem seems to be in the Mental Ray Mel.
How can the user interface text size be adjusted in photoshop elements 12? I have found plenty of people also asking how to make this adjustment but I have found no way to fix it.
View 2 Replies View RelatedPSE 11 is out and i have downloaded the trial.
Is there the option to change the UI font in PSE 11 - i can not find an option, despite this UI problem being around for at least PSE 10 and PSE 9......
If no UI option in PSE11 - WHY?