In AutoCAD 11 the right click pop-up has clipboard and an arraow you need to slide on to get to the copy, paste, paste as block, copy with base point...Older versions had these clip board features in the pop-up and I hate having one more step to get to the clipboard features. Is there way to customize what shows up with right click?
View 3 RepliesWhile being distracted while working, I inadvertently kept my finger on a key (forget which one), heard a little BEEP, and now my Right Click FlyOut Menu is going somewhere I don't need it to go to. I am getting the 'Snap" options box
instead of 'Last Command' Options Box.
i am using autocad 2012 last twoday i was faced this problem i cant edit the text through double click?and i seen some of options missed out in right click menu like ( copy,paste ,rotate ...... finally deselect the objects.
View 2 Replies View RelatedTrying to change the Hatch double click command from quick properties  to the familiar hatch edit dialog. When I go to the cui, hatch edit doesn't even appear as a command. There a lots of commands that don't appear in the CUI command list.
I added it, but I cannot get it to stick when I drag it to HATCH in the double click list. The the HATCH Advanced element box "ID_QUICKPROPERTIES" is greyed out so I cant retype it to "hatchedit"
It could be because I let autocad migrate from 2008 (pre ribbon) when I installed.
New hardware and fresh upgrade to v2011.
All computers will show the osnap menu when we shift+right click but one computer shows the regular short-cut menu.
How do i make the osnap menu appear with a shift+right click?
My Application Migrate from AutoCad 2008 to 2011.Shift right click osnap menu is not pop up.
View 3 Replies View RelatedAll of the sudden, when I go to the pull down menu and click "Save As", instead of the window opening where I can physically choose where I want to save or save over, I get the file directory in the command line. I even typed in the folder directory and it still doesn't save it there. Why the sudden change?
View 3 Replies View RelatedI intended to add more option at right click shortcut menu. Is it possible to be done?
View 2 Replies View RelatedI made the switch from acad 2006 to 2014. I was able to add quick leader to my dimension menu in customize user interface, but I don't have an icon in my dimensions toolbar. I figured it out, I needed to customize toolbars also, not just menus.
View 0 Replies View RelatedWhen we select File -> Open we’re presented with an Adobe designed file browser that has the files and folders on the right and a vertical bar of ‘Common Tasks’ )or Favourites) on the left. Is there a way to customize these ‘Common Tasks’? CS4 references a ‘My Documents’ folder location which is incorrect. I moved those files to a different location and I’d like to see where I can tell PS about this change. It would also be nice to add more convenient ‘Favorites’ and remove those I have no need for.
View 4 Replies View Relatedhow to customise your context menu to make it like some past versions of PSP, The person asking was using PSP X5 so I reset X5 to the default by holding down the shift key as I double clicked the X5 desktop icon. The X5 default layers context menu shows this:
In X3 I had the layers context menu like this:
In addition a sub context layer is present when we look at the New Mask Layer -
To start customising first Save your current workspace - File > Workspace > Save
then do View > Customise
In the Customise dialog box select Menu and under 'Select context menu' choose Layer Palette
The current Layer Context menu shows up in a new window. The Customise and Layer Palette context window can be dragged into new positions.
Any of the commands can be dragged over onto that Layer Palette context window and positioned where you want. Any of the commands already there can be dragged around to change their order or even removed by dragging out of the the Layer Palette context window. This can be a slow process to drag commands separately amd make a sub menu, so for these complex menu items there is a faster way.
Click the Layers menu item on the Menu bar , and holding the control key down drag the New Mask Layer down and into a position in the Layer Palette context menu and release. Here you can see the New Mask Layer and its sub menu have been placed in one action.
And after Closing the Customise Dialog box I can now see that the New Mask Layer context menu is working well
I have two menus that I use often and I would like to add them to my mouse buttons. Attached is a picture of the two menus I like and the two buttons. The Shift + Click has the correct menu already (Osnap menu2) my problem is adding my custom menu to the CTRL + Click doesn't work. I labeled Osnap Menu 1 and 2, 1 being the custom menu I have use in the past and 2 being the default osnap menu that comes with the cui file. How to get the second button to read my menu rather than both read the same osnap 2 menu?
View 1 Replies View RelatedWhat heading do you look for in the customize menu to change the colour of the main title bar? I can't seem to find it.
View 5 Replies View RelatedI have developed a script to perform some Custom action in Illustrator. I want to make this script run from a a File Menu Item so it can be invoked easily. Is there a way to customize Illustrator to add a new menu item or modify the existing menu tems functions. For example if the script needs to be invoked when the user click "Save" is there a way that could be done.
View 4 Replies View RelatedI use Quick Properties in static mode mostly for counting objects and quickly seeing the length of lines and polylines. These lengths are listed in feet and inches. Would it be possible to add an additional length item to the quick properties menu which shows the inches/decimal length? Would be awesome as I wouldn't then have to do the math to convert to inches.
View 3 Replies View RelatedWhere can I find a good document on how to customize the interface in AutoCAD 2012?I need to add an extra menu, palettes , custom text sizes...etc
View 3 Replies View RelatedI am trying to custom a new linetpye as below, with an arrowhead at the beginning and at the end but point to opposite direction. This is easy to build such linetype in Microstation, but I am new in autocad.
View 1 Replies View RelatedI just installed acad mep 2013 and I'm having some problems with the right click menu. I was using 2012 previously and I would right click, then press M for the move command. Now I have to press V for move in the right click menu. Is there any way to change which keys to press for the right-click menu?
View 3 Replies View RelatedDon't know how or why this has happened, but my AutoCAD has suddenly stopped showing the correct shortcut menu's when I right click. This happens both in 'default mode' and 'edit mode'. All I get is the default menu instead of my customised edit menu.
I've not edited my CUI nor my right click customisation, but when I've checked them, both are as they should be. I just can't work it out. Also, the delete key won't allow be to delete selected objects anymore.
I'm not sure what was the last thing I did before this error occured, but I think at some point I wanted to press the delete key but may have ended up pressing either the insert, end or home key and maybe for 2-3 seconds. Not sure if these would change anything but thought I should mention it.
Is there anyway these may have been disabled, for example a small insignificant icon somewhere?
I recently upgraded to 2012 but forgot to install the express tools, Doh!. I installed them through control panel repair and everything works. Except when I close and restart ACAD the menu bar express menu disappears. I can bring it back by using cuiload but this is not ideal. Any way to get it to stick?Â
AutoCAD 2012
Dell Precision T7400, Intel Xeon @3.4GHz
Win XP 32bit 4GB RAM
Nvidia Quadro FX 3700
Cyborg R.A.T. 7 mouse
I just had to reinstall Inventor and I forget how to remove the annoying radial menu that pops up whenever I right click. I just want the normal right click menu.Â
Inventor 2013
Windows XP
I have attached an image...but in 2013 we had an expanded Right Click shortcut menu...so if you clicked on a line for example it would give you alot of options...as you see in the image I do not have all those in 2014.
My "Shortcutmenu" is set to 11
Pickfirst is set to 1.
In CUI I do not see any seperate menus loaded under Shortcut.
I was working on max using the hair a fur modifery to try and test out something when I noticed somethign strange. When I right clicked in the view port to bring up the options (exsample cut, convert to polygon, hide, fezze ect.) it wouldn't come up. Hears what I've tried. Reinstal max, get a copy of the default interface from a school computer and tried loading that, turning off windows 7 's background color transparancy, removing all things installed right before the problem, run a system check for errors, a viruse scan and right now I'm trying a full restore from a back up. I don't know what's going on. I suspected that my graphic's card drive might be the caulprate but I checked that as well and it says that its all clear. I took the files that had the problem to other computers and they had no issue. It doesn't matter what file I load either this is universal. I can start with a blank file and the right click view port menue won't come up.
Detailed discription:
Launch 3ds max. Go to any view port upon launch. Right click in view port and no menue comes up.
Version:
student 2012
OS:
Windows 7 64 bit
Ram:
8 gigs
Graphics card:
Radeon
ACAD 2007. I recently had to reload the stock ACAD 2007 interface.... I would like to customize my right click menu (when selecting any drawing space object) to display only clipboard and properties..... right now, when I right click it displays EVERYTHING!
View 1 Replies View RelatedI use Autocad 2011, I appear to have somehow messed up my right click short-cut menu settings. Before, I could right-click and get all of the edit options (delete, move, rotate, draw order, properties, select similar, etc.). I could get these options whether an object was selected or not. Now, my options are the "default" ones (Repeat, Pan, Zoom, Quick calc, etc, to name a few). This happened after I made an adjustment to the drawing in a viewport. Ie. I was in layout, clicked into model space to draw a line, then clicked back to paper space. I NEVER do this (I always switch back to model to edit), except for this one time. Also, if I select an object and hit "delete" on the keyboard, nothing happens. I've already tried adjusting the "shortcutmenu" command number, and nothing really changes in the shortcut menu itself. Also, when keying in a command, the keystrokes used to show up beside my cursor, but now they show only in the command line at the bottom. That's not really a big deal, but I did like the previous function.
View 7 Replies View RelatedAny list of the shortcut keys for the Shift-Right Click Osnap Menu?
I know:
E = end
M = midpoint
P = perpendicular
I'm using Architecture 2012 and all of a sudden the right-click context menus are no longer specific to the selected objects. If I pick a door/window tag, I no longer get the specific options to anchor it to a specific door/window. This is typical of all objects now. All that ever pops up is the basic context menu.Â
View 3 Replies View RelatedHow to add to the right click menu of a client feature in the browser using the API? I'm trying to mimmick the right click menu that pops up when you right click other features like extrusion or hole in the browser. i.e: "edit feature", "redefine", etc.
View 3 Replies View RelatedMy system crashed and it apparetnly effected AutoCAD 2006 LT. Â All my toolbars disappeared, etc. Â I now have it all back the way it was except for my right-click menu is all mess up.
Regardless if an object is selected or not, the Snap Menu appears, instead of the one I was used to (that included Erase, Move, Copy Selection, Scale etc. ). How can I get that back?
Is there any way to turn off the menu transparency of the right click menu? Â I find it highly annoying in drawings seeing hazy black lines behind text I am readingIs there any way to get inventor to work properly with windows dpi scaling? Â It is quite useful to have windows display text a skosh larger than normal but inventor is completely unusable with that option enabled. Â text on toolbars disappears and the zoom/pan/orbit goes from fluid to jumpy and useless.
View 2 Replies View RelatedRecently updated from 2000 to LT2013. In 2000 I could Modify Text. So far I have found nothing that allows me to Modify Text."To Replace Existing Dimension Text With Alternate Text" it says to "Click Modify menu > Object >Text >Edit." The only Modify menu I can find is the Modify menu at the top showing 12 icons then it's drop down showing 14 more icons. There is no Object icon in that menu. how to Modify Text in LT2013.
View 9 Replies View Related