New hardware and fresh upgrade to v2011.
All computers will show the osnap menu when we shift+right click but one computer shows the regular short-cut menu.
How do i make the osnap menu appear with a shift+right click?
My Application Migrate from AutoCad 2008 to 2011.Shift right click osnap menu is not pop up.
View 3 Replies View RelatedAny list of the shortcut keys for the Shift-Right Click Osnap Menu?
I know:
E = end
M = midpoint
P = perpendicular
I use the right click as repeat last command a lot, but occasionally I need the shortcut menu and I have to go back and change my settings for right click.
What I would like to do is make Shift+Ctl+right click bring up the shortcut menu, but I cant seem to find it in the command list and when I do searches on google it just brings up stuff about adding an item to the shortcut menu.
Is there a way to make Shift+Ctl+right click bring up the shortcut menu?
I have two menus that I use often and I would like to add them to my mouse buttons. Attached is a picture of the two menus I like and the two buttons. The Shift + Click has the correct menu already (Osnap menu2) my problem is adding my custom menu to the CTRL + Click doesn't work. I labeled Osnap Menu 1 and 2, 1 being the custom menu I have use in the past and 2 being the default osnap menu that comes with the cui file. How to get the second button to read my menu rather than both read the same osnap 2 menu?
View 1 Replies View RelatedWhile being distracted while working, I inadvertently kept my finger on a key (forget which one), heard a little BEEP, and now my Right Click FlyOut Menu is going somewhere I don't need it to go to. I am getting the 'Snap" options box
instead of 'Last Command' Options Box.
i am using autocad 2012 last twoday i was faced this problem i cant edit the text through double click?and i seen some of options missed out in right click menu like ( copy,paste ,rotate ...... finally deselect the objects.
View 2 Replies View RelatedTrying to change the Hatch double click command from quick properties to the familiar hatch edit dialog. When I go to the cui, hatch edit doesn't even appear as a command. There a lots of commands that don't appear in the CUI command list.
I added it, but I cannot get it to stick when I drag it to HATCH in the double click list. The the HATCH Advanced element box "ID_QUICKPROPERTIES" is greyed out so I cant retype it to "hatchedit"
It could be because I let autocad migrate from 2008 (pre ribbon) when I installed.
In AutoCAD 11 the right click pop-up has clipboard and an arraow you need to slide on to get to the copy, paste, paste as block, copy with base point...Older versions had these clip board features in the pop-up and I hate having one more step to get to the clipboard features. Is there way to customize what shows up with right click?
View 3 Replies View RelatedAll of the sudden, when I go to the pull down menu and click "Save As", instead of the window opening where I can physically choose where I want to save or save over, I get the file directory in the command line. I even typed in the folder directory and it still doesn't save it there. Why the sudden change?
View 3 Replies View Relatedhow to make nice smooth looking menu/ribbon icons like the ones that come with AutoCAD? Mine all look pretty lame.
I am using Paint and a 16x16 bit canvas.
Is there a special graphics program that simplifies icon creation?
I intended to add more option at right click shortcut menu. Is it possible to be done?
View 2 Replies View RelatedA while ago I found out you can deselect something from your current selection set by holding down the shift key and clicking on it. This was a pretty useful tool...but then it randomly stopped working today for me.
View 4 Replies View RelatedAm I missing something or has shift-drag / click for deselecting been removed from C3D 2013?
Is this a variable I can re-enable? Or is there a hotfix for this?
We've tried every command imaginable. F3 doesn't work. Checked all setting is Drafting Settings, (incl. 3d). Saved, and restarted.
No OSNAPs work in any command.
The icons on my osnap toolbar do not coincide with the commands.
View 7 Replies View RelatedWhy the “Osnap” is not working for the “hatch”?
For example, the hatch below consist of lines but the “Osnap” can’t see them! Then when trying to draw a line for the point indicated below to the end of the one of the hatch lines then the snap doesn’t indicate the “Endpoint”
Is there a way to let the hatch “feel” the snap?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
Thats pretty much it. While pressing F3 to toggle Osnap, if Ortho is ON it first turns it off and then F3 would toggle Osnap. The same thing happens with F8 if Osnap is ON.
I checked out the CUI and for some reazon it had a lot of different shortcuts to toggle Osnap and Ortho, so I thought just keeping F3 and F8 would make it work, but it does the same thing.
I'm shift clicking the lines but they just won't connect!
Using version 8.
Is there a way the “Osnap” can “feel” the tangent of the "circle point style"?I’m wondering if there is a way that the “Osnap” can feel the circle “point style” (given in the screenshot below) such that it is snapped to its tangent?
View 2 Replies View RelatedI know this problem is really simple, but I just can't seem to get it to work. I should be able to left-click on a layer, hold in the shift key while left-clicking on a layer further down the list to select multiple layers. It doesn't work, I can't even get the (Alt-Left Click) command to work, allowing me to select individual layers.
Both these commands work in Image Ready and Flash just fine.
I have checked the keyboard settings, but I am not really sure what to look for - nothing seems out of the ordinary.
I have an inactive snap shortcut menu. When clicking shift + right mouse button the menu appears but when I typet
"E" for "ENDpoint", "M" for "Midpoint" or when I just click over the respective icons in the menu nothing really happens and I get the following message in the command bar:
"Command: _endp Unknown command "ENDP". Press F1 for help."
or
"Command: _mid Unknown command "MID". Press F1 for help."
I tried following, none of which worked:
1. resetting the main customization file ACA_Global.cuix
2. switching between different profiles and cuix files
3. reinstalling Autocad Architecture 2013
4. uninstalling and Installing Autocad Architecture 2013 service pack 1
5. installing older versions of Autocad (2008 and Architecture 2012)
6. reinstalling Windows 7 and installing Autocad Architecture 2013 again
is this possible. A lot of programs auto-duplicate when you drag and press either the shift or ctrl or alt key. Its a habit ive gotten pretty into. Plus, its a little akward for me to go from a left click immeadeitaly into a right click with the mouse. I always feel like i've dragged the object a little bit when I switch fingers. it would be great to just add a hot key of shift+drag to this feature, wouldnt even have to turn off the standard right click option, I could deal with both being there.
View 1 Replies View RelatedJust getting used to elements 11 - the tilt shift in the guided edit does not change when I click on the icon, then click and drag. I am sure I am following instructions correctly, but nothing changes when I try to rezone the area I wish to have showing without blur. I could do in operation in the expert mode, but it should work in guided edit.
View 7 Replies View RelatedI just installed acad mep 2013 and I'm having some problems with the right click menu. I was using 2012 previously and I would right click, then press M for the move command. Now I have to press V for move in the right click menu. Is there any way to change which keys to press for the right-click menu?
View 3 Replies View RelatedDon't know how or why this has happened, but my AutoCAD has suddenly stopped showing the correct shortcut menu's when I right click. This happens both in 'default mode' and 'edit mode'. All I get is the default menu instead of my customised edit menu.
I've not edited my CUI nor my right click customisation, but when I've checked them, both are as they should be. I just can't work it out. Also, the delete key won't allow be to delete selected objects anymore.
I'm not sure what was the last thing I did before this error occured, but I think at some point I wanted to press the delete key but may have ended up pressing either the insert, end or home key and maybe for 2-3 seconds. Not sure if these would change anything but thought I should mention it.
Is there anyway these may have been disabled, for example a small insignificant icon somewhere?
I recently upgraded to 2012 but forgot to install the express tools, Doh!. I installed them through control panel repair and everything works. Except when I close and restart ACAD the menu bar express menu disappears. I can bring it back by using cuiload but this is not ideal. Any way to get it to stick?
AutoCAD 2012
Dell Precision T7400, Intel Xeon @3.4GHz
Win XP 32bit 4GB RAM
Nvidia Quadro FX 3700
Cyborg R.A.T. 7 mouse
I just had to reinstall Inventor and I forget how to remove the annoying radial menu that pops up whenever I right click. I just want the normal right click menu.
Inventor 2013
Windows XP
I have attached an image...but in 2013 we had an expanded Right Click shortcut menu...so if you clicked on a line for example it would give you alot of options...as you see in the image I do not have all those in 2014.
My "Shortcutmenu" is set to 11
Pickfirst is set to 1.
In CUI I do not see any seperate menus loaded under Shortcut.
I was working on max using the hair a fur modifery to try and test out something when I noticed somethign strange. When I right clicked in the view port to bring up the options (exsample cut, convert to polygon, hide, fezze ect.) it wouldn't come up. Hears what I've tried. Reinstal max, get a copy of the default interface from a school computer and tried loading that, turning off windows 7 's background color transparancy, removing all things installed right before the problem, run a system check for errors, a viruse scan and right now I'm trying a full restore from a back up. I don't know what's going on. I suspected that my graphic's card drive might be the caulprate but I checked that as well and it says that its all clear. I took the files that had the problem to other computers and they had no issue. It doesn't matter what file I load either this is universal. I can start with a blank file and the right click view port menue won't come up.
Detailed discription:
Launch 3ds max. Go to any view port upon launch. Right click in view port and no menue comes up.
Version:
student 2012
OS:
Windows 7 64 bit
Ram:
8 gigs
Graphics card:
Radeon
ACAD 2007. I recently had to reload the stock ACAD 2007 interface.... I would like to customize my right click menu (when selecting any drawing space object) to display only clipboard and properties..... right now, when I right click it displays EVERYTHING!
View 1 Replies View Related