AutoCAD 2010 :: OSnap Not Working
Nov 30, 2011We've tried every command imaginable. F3 doesn't work. Checked all setting is Drafting Settings, (incl. 3d). Saved, and restarted.
No OSNAPs work in any command.
ADVERTISEMENT
AutoCAD 2010 :: Why Osnap Is Not Working For Hatch
Feb 23, 2012Why the “Osnap” is not working for the “hatch”?
For example, the hatch below consist of lines but the “Osnap” can’t see them! Then when trying to draw a line for the point indicated below to the end of the one of the hatch lines then the snap doesn’t indicate the “Endpoint”
Is there a way to let the hatch “feel” the snap?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
AutoCAD 2010 :: Ortho And Osnap Not Working Correctly - F3 And F8 Got Mixed
Jan 4, 2013Thats pretty much it. While pressing F3 to toggle Osnap, if Ortho is ON it first turns it off and then F3 would toggle Osnap. The same thing happens with F8 if Osnap is ON.
I checked out the CUI and for some reazon it had a lot of different shortcuts to toggle Osnap and Ortho, so I thought just keeping F3 and F8 would make it work, but it does the same thing.
AutoCAD Architecture :: App Intersection Osnap Not Working In Layout?
Oct 18, 2010Using ACA 2011 and Win7 here... and I've noticed that the apparent intersection osnap does not want to work at all while working in a layout if the geometry I'm trying to snap to is also drawn in the layout.
If the geometry is in model space that osnap will work fine both in model space (through the viewport) and from outside the viewport.
AutoCAD 2013 :: Perpendicular Osnap Not Working Correctly With Closed Polylines Grips
Dec 30, 2012Just found the issue with my AC2013.
A bit of difference is that the polylines do not have to be even closed. Any polyline gives me exactly the described behaviour, which is definitely not intended. Appears still not resolved.
AutoCAD 2010 :: Icons On OSnap Toolbar
Feb 3, 2012The icons on my osnap toolbar do not coincide with the commands.
View 7 Replies View RelatedAutoCAD 2010 :: Make Osnap Menu Appear With Shift+right Click?
Aug 26, 2010New hardware and fresh upgrade to v2011.
All computers will show the osnap menu when we shift+right click but one computer shows the regular short-cut menu.
How do i make the osnap menu appear with a shift+right click?
AutoCAD 2010 :: Shift -> Right Click Not Pop Up OSNAP Menu In 2011
May 23, 2012My Application Migrate from AutoCad 2008 to 2011.Shift right click osnap menu is not pop up.
View 3 Replies View RelatedAutoCAD 2010 :: Way Osnap Can Feel Tangent Of Circle Point Style?
Feb 26, 2012Is there a way the “Osnap” can “feel” the tangent of the "circle point style"?I’m wondering if there is a way that the “Osnap” can feel the circle “point style” (given in the screenshot below) such that it is snapped to its tangent?
View 2 Replies View RelatedAutoCAD 2010 :: Intersection Osnap Appears On Zoom Out But Disappears When Zoom In
Feb 22, 2012The AutoCAD doesn’t show the “intersect osnap” at certain zoom!
The “intersection osnap” between a “hatched rectangle” and a “DASHDOT2” line appears and disappears depending on the amount of zoom!
As I zoom out the “intersection osnap” appears but when I zoom in, it disappears
Why the "intersection Osnap" should disappear as I zoom in?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
AutoCAD .NET :: Getting OSNAP Without Active Command?
Feb 22, 2012is there a way to have OSNAP active while not within a command?
I am using PointMonitor to display information based on the position of cursor, but the point is always in z=0 plane.
AutoCAD Map 3D :: Osnap Pick Prioritizing
Mar 16, 2012In selecting a point in a drawing to connect new poly lines to existing objects, is there a way to set the order to which osnap elements are used?I have perhaps 1/2 of the osnap element settings activated. End point, Mid point, Node, Intersection, etc.
When I go to select, it's like everything EXCEPT End Point is recognizing. And while I can go to right click, and select end point, I am now wondering, if besides the rt click, there is a way to preset the priority, or order in which the osnap elements recognize the type.Without resetting the settings each time.
AutoCad :: Change Shortcuts For Osnap On / Off
Jan 8, 2013I want to change the shortcuts for osnap on/off (default F3) and ortho on/off (default F8 ) to either F1 and F2, or some letter like q and w, or ctrl+w and ctrl+e.
I cant find them under cui-->all commands. Don´t know if they are there somewhere.
Is it possible to change them to either of the above shortcuts?
I prefer F1 and F2 if it´s possible, then q and w and last if neither of the other two is possible ctrl+w and ctrl+e.
AutoCad 2D :: Inaccurate Nearest Osnap
Oct 22, 2012My "Nearest" osnap is not even close to snapping to my circle. All other snaps are working fine, nearest snap are working on lines and rectangles, not at all on circles.
Image attached.
AutoCAD Architecture :: Wall Grips / Osnap
Mar 27, 2013I quite often like to use the wall grips to adjust the length of a wall. This works really well accept for the occasional situation were I want to snap to the face of another wall rather than the justification line. I know that I can snap to the face of a wall rather than the justification line because I have some files that it works fine in and other files that it does not work in.
View 2 Replies View RelatedAutoCAD Architecture :: Turn On Perpendicular OSnap
Sep 28, 2011How to turn on the perpendicular osnap. Whenever i open the draft settings window and get close to the perpendicular name it changes to midpoint. I can not seem to select the perpendicular name.
View 2 Replies View RelatedAutoCAD 2013 :: Near OSnap Inexplicably Activating
Jan 24, 2013While drawing with a number of oSnaps activated, at irregular intervals they all inexplicably turn off and are replaced with the Near oSnap only.
how I might be inadvertently doing this or why it might be happening on its own?
AutoCad :: 2008 - Osnap Toolbar Disappeared
Dec 22, 2011I had been using the Osnap Toolbar forever, during a drawing session the toolbar vanished. I've gone to View Toolbars and the Osnap Toolbar is not listed. How do I recreate the Osnap Toolbar or find where it is hiding?
View 9 Replies View RelatedAutoCad :: Shift-Right Click OSnap Menu
Jan 16, 2013Any list of the shortcut keys for the Shift-Right Click Osnap Menu?
I know:
E = end
M = midpoint
P = perpendicular
AutoCAD Civil 3D :: Osnap To A Point Node?
Dec 9, 2013Is there a setting that I am missing where if your osnap is set to node, it will snap to the node if you hover over the point text? I seem to remember this working in versions before 2012.
View 5 Replies View RelatedAutoCAD 2010 :: PGP Is Not Working
Apr 28, 2012I am working with AutoCAD 2012 on a single computer. It appears that the acad.pgp doesn't work. for example when i type DI in command line it refers to:
Command: di DDINSERT
Command: nil
but i have checked the pgp file and in it, the letters DI refer to command DIST. Also in Command Alias Editor they refer to command DIST. I have also tried this:
Command: (findfile "acad.pgp")
and the answer is:
"C:\Users\User\appdata\roaming\autodesk\autocad 2012 -english\r18.2\enu\support\acad.pgp"
AutoCAD Civil 3D :: 2013 Line Does Not Follow Osnap?
Feb 25, 2013When trying to draw or stretch a line or grip along an object in 2013 it does not follow the osnap like it does in 2012. For instance if I draw a line and then want to draw another line from the beginning of that line along that line using the nearest osnap and inputting a distance, the line follows the cursor rather than the snap.
Civil 3D 2013 SP1
Win 7 x64 SP1
Intel Core2 Duo 2.67 GHz
8 GB RAM
NVIDIA Quadro FX 3500
AutoCAD 2013 :: How To Turn Off OSnap For Objects Under Wipeouts
Jun 4, 2013How to turn off osnap for objects under wipeouts?
It is annoying that although the objects under wipeout are not shown, they still become targets of osnap!
AutoCAD Civil 3D :: Osnap Settings Won't Stay When It Closes
Aug 3, 2011All of my OSNAP settings are reverting back to some default every time I open AutoCAD. This includes the snaps that are auto (I set endpoint, intersection and perpendicular. When I reopen, I get a random medly of snaps like tanget, parallell, insertion ect.) Object Snap tracking also truns off.
The settings in my profile also turn off (eg. marker). I have tried saving the settings to my profile with no luck. All of my other profile setting remain untouched.
I'm on Civil 3D 2012
AutoCAD Architecture :: AEC Steel Objects Have No OSNAP In Paperspace
Sep 23, 2011We model the building using AEC steel members in AutoCAD ACA. When the piping group xrefs our model into their model (in regular AutoCAD) to add their pipe, the AEC steel behaves properly in model space, but when they go to dimension in paperspace (for example from the center of their pipe to the face of a column) osnap does not recognize the AEC steel geometry.
View 3 Replies View RelatedAutoCAD 2013 :: Osnap Icon Appearance Distance
Jul 12, 2013I thought there was a setting for this? I want to adjust the Osnaps so they appear further away from the point. IE: As I want to pick the quadrant I have to get so close to the quadrant before the osnap shows. I can't remember the variable to adjust this distance.
View 3 Replies View RelatedAutoCAD Architecture :: OSNAP Not Snapping On Wall Edges?
Oct 13, 2011I have an xreffed drawing and I can snap on wall edges in model space but not through paper space. I have tried the "allow snap on wall justifcation line" and nothing has worked.
View 4 Replies View RelatedAutoCad :: OSNAP Doesn't Find Intersection Of Some Lines?
Dec 1, 2009I'm running 2002 and I have a drawing with an array of lines (forms a grid ceiling, actually). With OSNAP on I cannot grab the intersection of these lines, however, it does work on other lines in the drawing, as it usually does.
View 9 Replies View RelatedAutoCAD Civil 3D :: Can't Get Perpendicular 3D OSnap To Grab The Solid
Mar 18, 2013I have a drawing (c3d 2013) provided by a subcontractor that contains high density laser scan data in the form of Acad solids. I have a bunch of conventional QC shots on the same objects, that I would like to compare to the scan data.
I can bring the QC shots into the scan drawing as cogo points, but when I try to measure the distance to the face of the solid, I can't get the perpendicular 3d osnap to grab the solid.
AutoCAD 2010 :: ESC Key Stops Working?
Apr 16, 2010As I'm working in 2011 all of a sudden when I want to deselect all I hit the ESC key and objects are still selected. I can right click and select deselect all and that works. If I shutdown AutoCAD and restart the ESC key works again.
View 9 Replies View RelatedAutoCAD 2010 :: Working With Layers
Nov 27, 2012When working with layers, AutoCad 2011 goes into a "not responding" mode for a time. The more layers the longer it stays. Ctl,Alt Delete is not the answer.
My system is a Win 7, 32bit, with 4.0 Gb ram.
The system resource moniter is in the 67% MEM usage range. Normal usage is 47% with nothing visible on the display.