AutoCAD Map 3D :: Osnap Pick Prioritizing
Mar 16, 2012
In selecting a point in a drawing to connect new poly lines to existing objects, is there a way to set the order to which osnap elements are used?I have perhaps 1/2 of the osnap element settings activated. End point, Mid point, Node, Intersection, etc.
When I go to select, it's like everything EXCEPT End Point is recognizing. And while I can go to right click, and select end point, I am now wondering, if besides the rt click, there is a way to preset the priority, or order in which the osnap elements recognize the type.Without resetting the settings each time.
View 9 Replies
ADVERTISEMENT
Nov 30, 2011
We've tried every command imaginable. F3 doesn't work. Checked all setting is Drafting Settings, (incl. 3d). Saved, and restarted.
No OSNAPs work in any command.
View 3 Replies
View Related
Feb 22, 2012
is there a way to have OSNAP active while not within a command?
I am using PointMonitor to display information based on the position of cursor, but the point is always in z=0 plane.
View 1 Replies
View Related
Jan 8, 2013
I want to change the shortcuts for osnap on/off (default F3) and ortho on/off (default F8 ) to either F1 and F2, or some letter like q and w, or ctrl+w and ctrl+e.
I cant find them under cui-->all commands. Don´t know if they are there somewhere.
Is it possible to change them to either of the above shortcuts?
I prefer F1 and F2 if it´s possible, then q and w and last if neither of the other two is possible ctrl+w and ctrl+e.
View 9 Replies
View Related
Oct 22, 2012
My "Nearest" osnap is not even close to snapping to my circle. All other snaps are working fine, nearest snap are working on lines and rectangles, not at all on circles.
Image attached.
View 9 Replies
View Related
Mar 27, 2013
I quite often like to use the wall grips to adjust the length of a wall. This works really well accept for the occasional situation were I want to snap to the face of another wall rather than the justification line. I know that I can snap to the face of a wall rather than the justification line because I have some files that it works fine in and other files that it does not work in.
View 2 Replies
View Related
Sep 28, 2011
How to turn on the perpendicular osnap. Whenever i open the draft settings window and get close to the perpendicular name it changes to midpoint. I can not seem to select the perpendicular name.
View 2 Replies
View Related
Feb 3, 2012
The icons on my osnap toolbar do not coincide with the commands.
View 7 Replies
View Related
Feb 23, 2012
Why the “Osnap” is not working for the “hatch”?
For example, the hatch below consist of lines but the “Osnap” can’t see them! Then when trying to draw a line for the point indicated below to the end of the one of the hatch lines then the snap doesn’t indicate the “Endpoint”
Is there a way to let the hatch “feel” the snap?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 4 Replies
View Related
Jan 24, 2013
While drawing with a number of oSnaps activated, at irregular intervals they all inexplicably turn off and are replaced with the Near oSnap only.
how I might be inadvertently doing this or why it might be happening on its own?
View 1 Replies
View Related
Dec 22, 2011
I had been using the Osnap Toolbar forever, during a drawing session the toolbar vanished. I've gone to View Toolbars and the Osnap Toolbar is not listed. How do I recreate the Osnap Toolbar or find where it is hiding?
View 9 Replies
View Related
Jan 16, 2013
Any list of the shortcut keys for the Shift-Right Click Osnap Menu?
I know:
E = end
M = midpoint
P = perpendicular
View 4 Replies
View Related
Dec 9, 2013
Is there a setting that I am missing where if your osnap is set to node, it will snap to the node if you hover over the point text? I seem to remember this working in versions before 2012.
View 5 Replies
View Related
Feb 25, 2013
When trying to draw or stretch a line or grip along an object in 2013 it does not follow the osnap like it does in 2012. For instance if I draw a line and then want to draw another line from the beginning of that line along that line using the nearest osnap and inputting a distance, the line follows the cursor rather than the snap.
Civil 3D 2013 SP1
Win 7 x64 SP1
Intel Core2 Duo 2.67 GHz
8 GB RAM
NVIDIA Quadro FX 3500
View 6 Replies
View Related
Jun 4, 2013
How to turn off osnap for objects under wipeouts?
It is annoying that although the objects under wipeout are not shown, they still become targets of osnap!
View 2 Replies
View Related
Aug 3, 2011
All of my OSNAP settings are reverting back to some default every time I open AutoCAD. This includes the snaps that are auto (I set endpoint, intersection and perpendicular. When I reopen, I get a random medly of snaps like tanget, parallell, insertion ect.) Object Snap tracking also truns off.
The settings in my profile also turn off (eg. marker). I have tried saving the settings to my profile with no luck. All of my other profile setting remain untouched.
I'm on Civil 3D 2012
View 9 Replies
View Related
Sep 23, 2011
We model the building using AEC steel members in AutoCAD ACA. When the piping group xrefs our model into their model (in regular AutoCAD) to add their pipe, the AEC steel behaves properly in model space, but when they go to dimension in paperspace (for example from the center of their pipe to the face of a column) osnap does not recognize the AEC steel geometry.
View 3 Replies
View Related
Jul 12, 2013
I thought there was a setting for this? I want to adjust the Osnaps so they appear further away from the point. IE: As I want to pick the quadrant I have to get so close to the quadrant before the osnap shows. I can't remember the variable to adjust this distance.
View 3 Replies
View Related
Oct 13, 2011
I have an xreffed drawing and I can snap on wall edges in model space but not through paper space. I have tried the "allow snap on wall justifcation line" and nothing has worked.
View 4 Replies
View Related
Dec 1, 2009
I'm running 2002 and I have a drawing with an array of lines (forms a grid ceiling, actually). With OSNAP on I cannot grab the intersection of these lines, however, it does work on other lines in the drawing, as it usually does.
View 9 Replies
View Related
Mar 18, 2013
I have a drawing (c3d 2013) provided by a subcontractor that contains high density laser scan data in the form of Acad solids. I have a bunch of conventional QC shots on the same objects, that I would like to compare to the scan data.
I can bring the QC shots into the scan drawing as cogo points, but when I try to measure the distance to the face of the solid, I can't get the perpendicular 3d osnap to grab the solid.
View 8 Replies
View Related
Oct 18, 2010
Using ACA 2011 and Win7 here... and I've noticed that the apparent intersection osnap does not want to work at all while working in a layout if the geometry I'm trying to snap to is also drawn in the layout.
If the geometry is in model space that osnap will work fine both in model space (through the viewport) and from outside the viewport.
View 3 Replies
View Related
Dec 13, 2013
Back in LDT you used to be able to mouse over point descriptions of dragged state points to get Osnap to select the node. Civil 3D has apparently done away with this, why who knows but its very very hard to know what point your selecting if say you have a bunch of points on top of eachother. Can this be enabled anywhere?
The very mundain work around is to use 'PO to select the point entity, but it does not show the little osnap indicator on the point marker when you use 'PO.
How can I get my old Osnap node selection back?
Intel i7 2600 /z68 Gigabyte
8gigs DDR3 1800
Intel 320 Series SSD
Quadro 600 (1gig)
C3D 2013 / LDT 2009 / Win7 x64
View 4 Replies
View Related
Aug 26, 2010
New hardware and fresh upgrade to v2011.
All computers will show the osnap menu when we shift+right click but one computer shows the regular short-cut menu.
How do i make the osnap menu appear with a shift+right click?
View 5 Replies
View Related
Mar 29, 2010
I've been trying to use the automated plan & profile production tools with 2010, but haven't quite gotten the final product I wanted so I've resorted to manually setting up my own "viewframes" to align my viewports with. However, when I snap to either the top right of my profile view or the bottom right of my profile view, Civil 3d automatically crashes. This makes creating closed rectangular polylines to act as "viewframes" around my profile view very frustrating since at some point or another I'll forget to turn osnap off and blam!, civil3d is gone. It only happens with split profile views and it only seems to happen at the right side of the profile. It doesn't seem to happen at splits. It has happened in 2 different drawings. It has happened with different profile view styles.
Update: It only happens when Node is enabled in OSNAP so I can Node and be fine, at least until the next day I forget to disable Node while doing something near a profile.
View 4 Replies
View Related
Feb 2, 2000
How can use the Osnap "APParent Intersect" into a Lisp.Others osnap options use only one point as CENter option below:
(setq pt2 (osnap pt1 "cen"))
But to use APParent Intersect ou Perpendicular is necessary two points.I've tried use:
(setq pt2 (osnap pt1 "app"))
(setq pt2 (osnap pt1 pt2 "app"))
(setq pt2 (osnap pt1 "app" pt2))
(setq pt2 (osnap "app" pt1 pt2))
View 9 Replies
View Related
Apr 19, 2012
I've noticed some issues with Osnap tracking not working consistently with a floating command line. It seems to happen especially when trying to track back along an object.
No problems whatsoever when command line is docked.
View 9 Replies
View Related
Sep 1, 2010
I'm electrical and have my own display set oddly enough named "electrical". When I set the display to "electrical" I can't osnap to endpoint or midpoint of smart walls in the background (nearest works fine). When I change the display to something else, generally it works.
Is there an "osnap" setting for displays?
View 7 Replies
View Related
Oct 1, 2013
My company uses a menu system to organize standard symbols. The problem is that every time I insert one of these symbols I have to reset my Osnap settings because it clears all the check boxes.
View 3 Replies
View Related
May 23, 2012
My Application Migrate from AutoCad 2008 to 2011.Shift right click osnap menu is not pop up.
View 3 Replies
View Related
Jan 4, 2013
Thats pretty much it. While pressing F3 to toggle Osnap, if Ortho is ON it first turns it off and then F3 would toggle Osnap. The same thing happens with F8 if Osnap is ON.
I checked out the CUI and for some reazon it had a lot of different shortcuts to toggle Osnap and Ortho, so I thought just keeping F3 and F8 would make it work, but it does the same thing.
View 5 Replies
View Related
