Thats pretty much it. While pressing F3 to toggle Osnap, if Ortho is ON it first turns it off and then F3 would toggle Osnap. The same thing happens with F8 if Osnap is ON.
I checked out the CUI and for some reazon it had a lot of different shortcuts to toggle Osnap and Ortho, so I thought just keeping F3 and F8 would make it work, but it does the same thing.
Just found the issue with my AC2013.
A bit of difference is that the polylines do not have to be even closed. Any polyline gives me exactly the described behaviour, which is definitely not intended. Appears still not resolved.
We've tried every command imaginable. F3 doesn't work. Checked all setting is Drafting Settings, (incl. 3d). Saved, and restarted.
No OSNAPs work in any command.
Why the “Osnap” is not working for the “hatch”?
For example, the hatch below consist of lines but the “Osnap” can’t see them! Then when trying to draw a line for the point indicated below to the end of the one of the hatch lines then the snap doesn’t indicate the “Endpoint”
Is there a way to let the hatch “feel” the snap?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I'm using Autocad LT 2012 and ortho is only working vertical. Circles appear as straight lines and arcs won't draw at all. If I copy an object or text from another drawing, it pastes as a straight line. I also can't rotate anything except vertically.
View 3 Replies View RelatedI just got a new dell inspiron laptop and installed ACAD 2011. Normally I draft with the ortho lock on and hold down shift when I want to disable it temporarily. With my new laptop this doesn't work. Holding shift down doesn't seem to make any difference at all.
View 9 Replies View RelatedI have a student who is using AutoCAD 2010 and has Ortho set to on and for some reason it does not draw straight horizontal or vertical lines. They are off by about 5 degrees.
View 9 Replies View RelatedI´ve a problem with rendering. The background-color gets mixed with the object. I´ve already reinstalled Autocad but it does n´t fixes my problem. What could be the problem?
It looks like this:
It should look like this:
I would love for my 2011 and 2013 to work the same as my 2008 does.
In 2008, when I grab a grip and stretch it with either ortho or polar turned on, I get a little tooltip beside the crosshairs. All it says is the distance and the angle, and whether it is Ortho or Polar. For example, if I stretch to the left with ortho on, it may say
Ortho: 16.55 < 180°
Or if I stretch up and to the right with Polar on, it will say
Polar: 16.55 < 45°
I really, really really want this back! This is not dynamic input, I hate all that ridiculous clutter around my crosshairs. But this little info box is absolutely invaluable!
I have checked the Tooltip setting (on in all versions), And I've been playing with all the Dynamic Input settings, but I can't get it to work. The odd part is that 2011 was working until about a week ago. I'm not sure if 2013 was or not.
Using ACA 2011 and Win7 here... and I've noticed that the apparent intersection osnap does not want to work at all while working in a layout if the geometry I'm trying to snap to is also drawn in the layout.
If the geometry is in model space that osnap will work fine both in model space (through the viewport) and from outside the viewport.
The icons on my osnap toolbar do not coincide with the commands.
View 7 Replies View RelatedNew hardware and fresh upgrade to v2011.
All computers will show the osnap menu when we shift+right click but one computer shows the regular short-cut menu.
How do i make the osnap menu appear with a shift+right click?
My Application Migrate from AutoCad 2008 to 2011.Shift right click osnap menu is not pop up.
View 3 Replies View RelatedIs there a way the “Osnap” can “feel” the tangent of the "circle point style"?I’m wondering if there is a way that the “Osnap” can feel the circle “point style” (given in the screenshot below) such that it is snapped to its tangent?
View 2 Replies View Related(I have tested this on both Map 2010 and Map 2014 but it could be happening in other AutoCad platforms)
when offsetting a polyline with a shallow deflection, the newly created polyline is created incorectly.
I have a 2 segment polyline with a 0D03'00" deflection. when I offset it, the vertex of the new polyline is created in the wrong location. On a polyline with a 0d04'00" deflection, offset works correctly.
If I explode the polyline, offset the lines and fillet them, the vertex is correct.
Attached is the final result. The red polyline is the polyline with a 3' deflection and the green polyline has a 4' deflection. when offset the vertex's should land at the center of the circles that are drawn but the red polyline vertex is incorrect by 0.00654456.
The AutoCAD doesn’t show the “intersect osnap” at certain zoom!
The “intersection osnap” between a “hatched rectangle” and a “DASHDOT2” line appears and disappears depending on the amount of zoom!
As I zoom out the “intersection osnap” appears but when I zoom in, it disappears
Why the "intersection Osnap" should disappear as I zoom in?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
In AutoCAD 2011 and 2012 my spell check instantly recognizes a misspelled word as soon as you enter a space after the word as you type.
AutoCAD 2013 does not recognize the misspelling until I go back (still within the text editor) and click on the word. Only then will it show the red underline. This is using Dtext only. Mtext works fine.
For the bad spellers or missed keystrokes, the fast "on the fly" spell checking was great. How to get my AutoCAD 2013 to behave similarly?
When you go to the Appearance Browser and go to our custom appearances, some of the thumbnails don't match what the appearance is actually set to. If you open up/edit the appearance it shows the correct appearance, but the thumbnail isn't displayed correctly.
View 7 Replies View RelatedI automatically updated last week for my 2014LT and since then the LAYERS hasn't worked properly. Layer Manger still seems to work correctly, but the Layers tab on the Home ribbon does not. I am running Windows 7 Ultra, Quad Core i7 with 16 MB of Ram, and had been running without errors until this last update.
When/if I select the "Freeze Layer" tab from the top ribbon, and then select the layer on the drawing it turns it off as it should, but if I then use the pull down to locate the layer and turn it back on, nothing happens. It does not appear again; it may not even show up now (see below). I found that if I go to LAYER MANAGER and turn on the layer it still doesn't turn on unless I turn it off and then back on; which will bring it back unfrozen. Also, some layers when frozen do not then show up on my pull-down list or LAYER MANAGER list unless I save the drawing and restart 2014LT. The layer then shows up on the Layer Manger and ribbon.?
Just love updates when everything was already working properly, and then they don't after the "Update"!
I've used cad now in a basic 2d architectural sense now for 10 years, through various versions.
I have recently dropped back to a 2007 from 2008 (changed jobs) and for some reason the draw order is all messed up i noticed this first through hatching but its on everything including inserted images.
I've tried a few of the solutions on other threads even uninstalling cad and re-installing it and nothing seems to be sorting it. Functions like 'send to back' etc just don't work and the draw orders are all to pot.
For an intersection, I am trying to create an alignment and profile from the Lane (edge of traveled way) of my main road for the intersection lanes to tie to. I just did this yesterday on this same corridor without any issue, but today it doesn't create the alignment correctly. It doesn't actually follow the feature line that I select. The alignment is in orange and the green line is the lane line. Notice that the alignment isn't following the lane line.
What would cause this? It worked fine doing the exact same thing yesterday, but today it's not.
Infrastructure Design Suite Premium 2014
Civil 3D 2014 x64
Windows 7 64-bit
6GB RAM
I cleaned up my block and I am trying to use a field to reference a polyline for it's overall distance. The distance changes with my lookup action. After rotating and going back and forth from "On" - "Off" - "Both Off", then back to "On", the red polyline doesn't stretch back on it's original plane.
View 5 Replies View RelatedWhen I start my Photoshop CS5.1 I get an error saying that my standard brushes, standard colors etc. are missing/
View 1 Replies View Related'm running windows 7, and am using PS CS5. It has started developing a few problems that are becoming very troublesome. My system is 64-bit running intelcore i5 2320 3.00 gz with 6gb ram. It's a Dell which is probably the main problem to begin with, but here goes.
It won't open any secondary files on the first try. When it doesn't, I have to scroll through folders, then try to re-open the file. Major headache. On my preferences under performance, "Open GLdraw" is not checked.
It often won't let me make any image adjustments on a file, or on a layer unless I close the program and restart.saving files in an unrecognized format. I usually can recover some if I open them with paint, but I find this ridiculous.
Today I tryed to simulate cloth that was created in 3ds max 2012.While in max 2012 it works fine, in 2014 the cloth pops a few centimeters up. No matter what i tried (reset state, erase simulation, delete the cloth modifier and re apply it) the problem persists.
Along with other problems such as geometry being corrupted (in max 2014), crashes when rendering, and wierd viewport problems, max 2014 has to be THE MOST buggy and problematic release of 3ds max I've ever used.
I have tried unistalling framework 4 and reinstalling using the standalone installer. I have also used the framework clean up tool with no luck. I have tried to repair the installed framework 4 with no success. I have tried all of this with my antivirus turned off and I have tried to use Microsoft fixit along with running Ccleaner registry fix.643 Error.
View 3 Replies View RelatedI am running Photoshop CS5, and when I am use cmd-0 (fir to screen) the window reduces to the tiniest speck
View 6 Replies View RelatedI can't get quickmask to work correctly in photoshop. Each thing I try to mask and then copy ends up having 50% or so opacity. All the layers are at 100% opacity, and in the quickmask options opactiy is also at 100%. Anyone know what could be wrong?
View 5 Replies View RelatedWe have dwg auctocad 2010, and there are some Arabic Text in the cad dwg,
When I convert cad dwg into PDF file, It arabic Text not showing correct Arabic language.
Arabic Text show separate separate alphabat why ?
How I could convert cad dwg so that aracbic text should be show correctly in PDF file ?
I am working for a client on a site where they wish to include links to .dwg files for their designers to download. The links I'm creating are simple (using square brackets instead of standard HTML brackets to illustrate):
[a href="/t5/forums/postpage/board-id/filename.dwg"]click here to download a 2D CAD drawing[/a]
The files are simple, 2D CAD drawings saved from AutoCAD 2010 or 2012.
The behavior I expect is the same behavior I might see if I was linking to an executable file or, for example, a .psd file: a dialog box is launched by the browser, prompting the user to save the file or possibly open in an associated piece of software.
The behavior that actually happens (but only in Safari) is that the browser attempts to render the file as a plain-text file, and the gory contents of the file are displayed as a tab in the browser.
I have done some looking around, and I've seen plenty examples of dwg's linked to on websites, and these download just fine, as expected. However, most of these examples that I find are saved in older formats, say 2004 and earlier. So, I tried to save our files as earlier formats, but I still experience the same issue.
Is there some setting I can set or some meta tag in the files I can change so that Safari doesn't think it's a plain-text MIME type? We can just zip the files, but that seems like an unnecessary step that we shouldn't have to do if AutoCAD was saving these files correctly.
i start in a new position for a new company noticed they have several cuix menu files for blocks such as structural shapes and weld symbols. so i loaded the menus with menuload and map to the directory of the blocks reference in the options files tab, but when i select the menu if has the block mapped to a different drive that does not exist. how can i change it to when i select, for say a w6x9 to map to the correct block on the correct drive instead of mapping it to some s: drive the directory structure is correct but the drive letter is not.
View 7 Replies View Related
