I just got a new dell inspiron laptop and installed ACAD 2011. Normally I draft with the ortho lock on and hold down shift when I want to disable it temporarily. With my new laptop this doesn't work. Holding shift down doesn't seem to make any difference at all.
View 9 RepliesIf I have images in my dwg, and I want to temporarily use the shift key for ortho, it doesn't work. On the cammand line, it reads, "Image (s) not selected. Select Images (s) then issue command." I am not trying to manipulate an image. Why is it defaulting to an image object?
Civil 3D 2013
Windows 7 64-bit
Inteel 2.40 GHz 8 GB RAM
Dell T7600
I have a student who is using AutoCAD 2010 and has Ortho set to on and for some reason it does not draw straight horizontal or vertical lines. They are off by about 5 degrees.
View 9 Replies View RelatedI would love for my 2011 and 2013 to work the same as my 2008 does.
In 2008, when I grab a grip and stretch it with either ortho or polar turned on, I get a little tooltip beside the crosshairs. All it says is the distance and the angle, and whether it is Ortho or Polar. For example, if I stretch to the left with ortho on, it may say
Ortho: 16.55 < 180°
Or if I stretch up and to the right with Polar on, it will say
Polar: 16.55 < 45°
I really, really really want this back! This is not dynamic input, I hate all that ridiculous clutter around my crosshairs. But this little info box is absolutely invaluable!
I have checked the Tooltip setting (on in all versions), And I've been playing with all the Dynamic Input settings, but I can't get it to work. The odd part is that 2011 was working until about a week ago. I'm not sure if 2013 was or not.
Thats pretty much it. While pressing F3 to toggle Osnap, if Ortho is ON it first turns it off and then F3 would toggle Osnap. The same thing happens with F8 if Osnap is ON.
I checked out the CUI and for some reazon it had a lot of different shortcuts to toggle Osnap and Ortho, so I thought just keeping F3 and F8 would make it work, but it does the same thing.
I dont know if this an Autocad Lt 2012 or windows 7 function, but a lot of times when I'm typing in Autocad (using Dtext), the caps lock seems to switch itself on and off, which of course is extremely annoying.
How do I set Autocad or Windows 7 not to do this.
I have a dual monitor setup and I maximize acad2011 on monitor 2 and have my toolbars on monitor 1.
I like to have my toolbars floating, but justified to the side with the 'gap' between the montiors so the tool bars fly out and I can see my email or reference docs or whatever on monitor 1 also. Sadly every time I close and re-open acad my toolbars re-justify to the center of monitor 1. I've tried unlocking and locking but that doesn't work. I am using the 'better', errr, excuse me, 'classic' workspace.
My workstation had a major reset and my customization (retrofit) making my group lock key-combo [Ctrl+Shift+A] as it had been some time in the past is lost. It has been so long since I meddled with setting hotkeys that I cannot remember where that is done. I either need to know how to toggle the group lock in the "out of the box 2012" or where to set my hotkey prefs.
It is said that a fool's voice is known by multitude of words... I'm just writing this stuff instead of saying it outloud... that's my loophole.
Windows 7 Professional 64-bit - Service Pack 1
Intel﴾R﴿ Core﴾TM﴿ i7-3820 CPU 3.60GHz; 16 GB DDR3 Dual Channel RAM
nVidia Quadro 4000; AutoCAD Civil 3D 2013, sp1
I rearranged the order of the panels of the "Home" tab to suit the way I like them to be. When i come in for work and open AutoCAD for the first time, or even if I need to shut it down and open it back up, not only does AutoCAD not start in my profile, but when I do set my profile to current, all of the panels rearrange themselves into default location. I even went into the 'Tools> Customize> Interface' menu to change the order the panels are set in there, but it still doesn't work. Everyday, I need to manually change their locations.
View 4 Replies View RelatedFor years, I've been scaling viewports in my Layout tabs with this process:
1. MVIEW to make viewport.
2. Switch to MODEL, Zoom, Scale, 1/## XP
3. Switch back to PAPER, MVIEW, Lock, ON.
4. Copy Layout tab
5. In new Layout tab, MVIEW, Lock, OFF.
6. Switch to MODEL
to Pan to the area for Sheet # 2, Zoom, Scale the viewport for that sheet.
In 2012, when I MVIEW, Lock, OFF - it doesn't seem to turn off the Lock on the Viewport. I can't unlock a viewport to re-center / scale it.
And regarding viewport locking/unlocking issues
Lock/unlock commands have three major problems! No “window selection” to select the layers required to be locked in one go. For example, the “isolate” tool works fine with window selection! In principle, I have no idea about the philosophy beyond which some commands are banned from “window selection!No BUILT-IN icon to Lock All or Unlock All (sure, we can customize it but I’m talking about having this command as built-in)The AutoCAD doesn’t give an alert if a command is applied in the location where particular layers are looked. For example, in many cases, we get into trouble as we move particular objects to discover later that some of the objects were locked! That’s fine, but the AutoCAD should give warnings in case a command is applied where some layers are locked.
View 3 Replies View RelatedI want to create a hot key that will lock viewports on/off. The command is MVIEW / L / ON OR OFF. What I would like to do is have VPL lock viewports and VPLL unlock viewports. How can I do this?
View 1 Replies View RelatedInside the trim command I cannot hit "shift" to switch to the extend command instead.
View 6 Replies View RelatedThe boss wants to lock down the title block so no one can change the appearance of the "T"block but still wants the attributes to work.
Currently the tile block is a stand alone drawing which is used to start new drawings and is also in template format.
We are using AutoCad 2012. Our company have more than 32 disciplines. For any projects the drawings are prepared with many disciplines. Civil does the civil drawing portions, water does the water pipeline portion, electrical does the electrical cable layout portions etc. etc. Each departments have their own set of layers in the drawing.
Now the problem is civil can accidentally modify the entities of electrical departments / utility departments. Though we lock the other disciplines layers programmetrically, but user can unlock the other disciplines layers easily if he wish to. Can we make those other disciplines layers read only? So that users can draw / modify in his own discipline layers but can not do that in other disciplines layer. But he can refer those layers / copy entities from those layers if he wish to? Some sort of xref type of thing is required, but we can not use xrefs as we work in a single drawing and our custom drawing management system is integrated with this type of file system accross the offices.
I was curious if there is a way to lock a specific attributes contents in autocad 2012. I have an attribute with a field inserted that I don't want people to be able to change. If this is possible
View 2 Replies View RelatedNew hardware and fresh upgrade to v2011.
All computers will show the osnap menu when we shift+right click but one computer shows the regular short-cut menu.
How do i make the osnap menu appear with a shift+right click?
When I rotate my view in drawings containing .sid orthos, the orthos shift. This also happens when I rotate the view in a viewport. I've attached a couple screen caps showing the problem.
View 6 Replies View RelatedMy Application Migrate from AutoCad 2008 to 2011.Shift right click osnap menu is not pop up.
View 3 Replies View RelatedI am having a problem with the perpendicular function when I draw a line. It won't lock at a single point, instead it moves along an axis.
For example, when I want to draw a line in Y direction it moves in the X axis, and opposite if I draw in the X direction.
How can I make the perpendicular function lock to one position?
So this really doesn't have much to do with objects in a drawing. Say for instance, I go into the PURGE dialogue box, and I want to select multiple layers to purge, but not all of them. If I click a layer, and the hold CTRL and click other layers, the only one that stays highlighted is the one I just clicked...so using CTRL doesn't allow me to highlight multiple entities at the same time.
It's gets a little more weird using SHIFT. The conventional SHIFT method (works in Windows Explorer and other applications) is clicking an object, holding SHIFT, and then clicking another object further down the list...this will highlight both of those entities clicked, plus every single entitiy in between them. In AutoCAD (use the PURGE dialogue box again for reference), if I click an object, hold SHIFT and click an object down the list, it will highlight the last object clicked and everything in between the two, but it will deselect the original object. Also, if I use SHIFT to select multiple objects, and then go back to the original that was deselected and hold CTRL to select it, the last object that was selected using SHIFT gets deselected.
Is there a system variable for holding down shift and picking multiples?
When picking multiples files, to bring in xrefs, I can pick them, but some of the other in the office can not, it want let them pick more then one file at a time.
I have a drawing where i am not able to select multiple grips using shift/pick to make the grips "hot". I'm not able to make even one of the grips of a poly line "hot". However, while trying to solve the problem, i've opened another drawing where i AM able to make grips "hot". It doesn't appear to be a system setting issue.
View 6 Replies View Relatedhow to change ortho on /off key from F8 to other key i want to set it by digit " 5 "
View 9 Replies View RelatedI have two menus that I use often and I would like to add them to my mouse buttons. Attached is a picture of the two menus I like and the two buttons. The Shift + Click has the correct menu already (Osnap menu2) my problem is adding my custom menu to the CTRL + Click doesn't work. I labeled Osnap Menu 1 and 2, 1 being the custom menu I have use in the past and 2 being the default osnap menu that comes with the cui file. How to get the second button to read my menu rather than both read the same osnap 2 menu?
View 1 Replies View RelatedIs there any way to lock a text style so that the associated font style can not be changed?
View 2 Replies View RelatedMy new HP laptop has functions assigned to the F function keys, and this disables the autocad functions for these keys. I am told by HP that it is not possible to turn off these functions to allow cad to use them. I just tried working without using the F3 and F8 keys, and I am crippled. How can I assign another key - say Q - to toggle ortho?
View 9 Replies View RelatedI'm using Autocad LT 2012 and ortho is only working vertical. Circles appear as straight lines and arcs won't draw at all. If I copy an object or text from another drawing, it pastes as a straight line. I also can't rotate anything except vertically.
View 3 Replies View RelatedI am having a problem this morning. When I started AutoCad LT 2012 and opened my drawing, I can only draw a line in one direction. Also, when i insert a block, all I get is a flat line.
View 3 Replies View RelatedHow to get the properties of plant 3d ortho block?
AutoCAD Plant 3d 2014
I am using Ortho Mode F8 on. This has been giving me perfect lines on screen. Now for some reason i have kinks in almost all my straight lines. I am sure i have hit some setting. Also I have lived it with so long I cannot use undo.
View 5 Replies View Related