AutoCad :: Change Ortho On / Off Key From F8 To Other Key?
Feb 4, 2013how to change ortho on /off key from F8 to other key i want to set it by digit " 5 "
View 9 Replies
ADVERTISEMENT
AutoCad :: Reassigning A Key To Toggle Ortho
Mar 30, 2013My new HP laptop has functions assigned to the F function keys, and this disables the autocad functions for these keys. I am told by HP that it is not possible to turn off these functions to allow cad to use them. I just tried working without using the F3 and F8 keys, and I am crippled. How can I assign another key - say Q - to toggle ortho?
View 9 Replies View RelatedAutoCad 2D :: Ortho Only Working Vertical?
May 18, 2011I'm using Autocad LT 2012 and ortho is only working vertical. Circles appear as straight lines and arcs won't draw at all. If I copy an object or text from another drawing, it pastes as a straight line. I also can't rotate anything except vertically.
View 3 Replies View RelatedAutoCAD Civil 3D :: Using Shift Key For Ortho When There's Images
Sep 7, 2012If I have images in my dwg, and I want to temporarily use the shift key for ortho, it doesn't work. On the cammand line, it reads, "Image (s) not selected. Select Images (s) then issue command." I am not trying to manipulate an image. Why is it defaulting to an image object?
Civil 3D 2013
Windows 7 64-bit
Inteel 2.40 GHz 8 GB RAM
Dell T7600
AutoCAD LT :: Can Only Draw Line On X In Ortho Mode
Mar 19, 2012I am having a problem this morning. When I started AutoCad LT 2012 and opened my drawing, I can only draw a line in one direction. Also, when i insert a block, all I get is a flat line.
View 3 Replies View RelatedAutoCAD 2010 :: Shift Key And Ortho Lock
Jul 22, 2010I just got a new dell inspiron laptop and installed ACAD 2011. Normally I draft with the ortho lock on and hold down shift when I want to disable it temporarily. With my new laptop this doesn't work. Holding shift down doesn't seem to make any difference at all.
View 9 Replies View RelatedAutoCAD .NET :: How To Get Plant 3D And Ortho Object Properties
Aug 20, 2013How to get the properties of plant 3d ortho block?
AutoCAD Plant 3d 2014
AutoCad :: Kinks In Straight Lines While Using Ortho F8
Aug 29, 2012I am using Ortho Mode F8 on. This has been giving me perfect lines on screen. Now for some reason i have kinks in almost all my straight lines. I am sure i have hit some setting. Also I have lived it with so long I cannot use undo.
View 5 Replies View RelatedAutoCad :: Rotating Arbitrary Angle To Ortho
Dec 14, 2013Is there a quick way of achieving the following:
You have an object rotated at an arbitrary angle
You want to rotate it back to a 90 degree line by snapping it.
I can do this by measuring the arbitrary angle and then rotating it manually based on my measurement.
AutoCad 2D :: Toggle Between Ortho On / Off - Measure Command
Jan 28, 2013I have moved onto a new machine and there are 2 AC functions I need to change.
1. I used to be able to toggle between Ortho on/off by holding the SHIFT key, on this machine it doesn't activate. Is there a command for this? I know I could use F8 but my hand is over the SHIFT key when I draw so its easier to do it this way.
2. When I activate the MEASURE command AC automatically activates Dynamic Input which makes my cursor jumpy when I move it. How can I stop this from happening? To clarify, I don't want Dynamic Input on when I am in the measure command.
AutoCad :: Drawing Line Vertical And With Ortho On
Mar 21, 2012I am running AutoCAD 2012 and i am having a problems with drawing a line.The problem i have with it, i have changed some settings and i can't remember what i changed. But how to change it back.
First let me explain what i am talking about. Once i am in front view and trying to drawing a line vertical and with ortho on, it will not allow me to draw a line vertically either up or down, only horiztonal. It looks like to me that ortho is lock on top ortho only.
AutoCad :: F8 Key Doesn't Work For Ortho Mode?
Aug 10, 2013I can't use F8 key for Ortho mode in Auto Cad 2012. I checked CUI and it seems to be ok but when I press the F8 key It doesn't work. as matter of fact, after pressing F8 key, line type manager window is opened!
View 9 Replies View RelatedAutoCAD 2010 :: Ortho Does Not Draw Straight Lines?
Apr 14, 2011I have a student who is using AutoCAD 2010 and has Ortho set to on and for some reason it does not draw straight horizontal or vertical lines. They are off by about 5 degrees.
View 9 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Locking User Into Using Ortho?
Dec 17, 2012Any way to permanently disable polar. Like if autocad were to automatically switch to ortho every 10 mins or something?
View 5 Replies View RelatedAutoCAD 2010 :: POLAR And ORTHO Dynamic Displacement Display
Aug 22, 2013I would love for my 2011 and 2013 to work the same as my 2008 does.
In 2008, when I grab a grip and stretch it with either ortho or polar turned on, I get a little tooltip beside the crosshairs. All it says is the distance and the angle, and whether it is Ortho or Polar. For example, if I stretch to the left with ortho on, it may say
Ortho: 16.55 < 180°
Or if I stretch up and to the right with Polar on, it will say
Polar: 16.55 < 45°
I really, really really want this back! This is not dynamic input, I hate all that ridiculous clutter around my crosshairs. But this little info box is absolutely invaluable!
I have checked the Tooltip setting (on in all versions), And I've been playing with all the Dynamic Input settings, but I can't get it to work. The odd part is that 2011 was working until about a week ago. I'm not sure if 2013 was or not.
AutoCAD 2010 :: Ortho And Osnap Not Working Correctly - F3 And F8 Got Mixed
Jan 4, 2013Thats pretty much it. While pressing F3 to toggle Osnap, if Ortho is ON it first turns it off and then F3 would toggle Osnap. The same thing happens with F8 if Osnap is ON.
I checked out the CUI and for some reazon it had a lot of different shortcuts to toggle Osnap and Ortho, so I thought just keeping F3 and F8 would make it work, but it does the same thing.
AutoCad :: Enable Ortho Whilst Specifying Points Using WIPEOUT Command?
Oct 8, 2011know whether one can enable 'ortho' whilst specifying points using 'WIPEOUT' command?
View 5 Replies View RelatedAutoCAD Map 3D :: Drop Ortho-photo On Surface Generated From Contour Line - Multiple Association
Nov 5, 2013I want to do a simple thing : drop ortho-photo on surface generated from contour line.
First thing, I need the basic terrain. I did import my contour line in a new draw, using the import map feature. I then saved the draw under the name " topo ". At this point, the contour line are 2D break line with no elevation.
I then opened a new draw to which I did associate my draw " topo ". Then I used a query to modify the elevation of the line using the attribute " contour " in my table, thus resulting in my breakline to become 3-D. It works fine. Then I save the new draw as " 3D_Topo ". I then get a warning :
" The association between objects interogated in the current drawing and associated will be deleted once the current document of the draw is closed " (I made the translation from french to english, in french it stated like this : " L'association entre des objets interrogés dans des dessins courants et associés sera supprimée une fois le fichier de dessin courant fermé. " ).
Well question #1 : What does this warning mean / imply ?
Then, I have those .ecw files as ortho photo which I want to import. So I use the function " connect " with raster image, then I select my file, then I " add to draw ".... then something very strange happens.
Sometime, the image appears correctly...and some other times I get nothing and I get this " disconnected " message in the task pane ..and no matter how many time I actually connect again the .ecw files, it will not happen in the draw ! Then I simply close the draw, start map 3D again, then I do the exact same thing, and sometime it works, sometime it doesn't.
Question #2 : any clue on why the .ecw files sometime works, sometime doesn't?
Now, let's assume I finally made it to connect correctly and that Map3d didn't crash whilst I was doing it (because I don't know for you, but here, it does happens quit often), I now have (as shows in the picture I attached) two thing. A surface made (well, I went back in the civil 3-D module to make the actual surface from the breakline definition) with the contour line and a imported image. I now want to drap the image on my surface! So I use the option " drap " which is in the surfaces option (in the ribbon surface tools)... well it looks nice since it propose me to use the surface I made up with the contour line as the base and the imported .ecw files as the file to be draped upon. So I simply do that and.... well...nothing happens! My image isn't draped at all, it stays there,
Question #3 : How should I proceed to actually drap my image over my surface ?
Question #4 : Considering I made it to drap the surface, how can I save this new draw independently of the attached other draw or database?
AutoCAD Inventor :: Change Drawing Scale With ILogic Upon Parameter Change
Jul 8, 2013I have a spreadsheet and iLogic driven mater assy to generate different iterations.
I would like to change the scale of a base view on a drawing based on a parameter in my assembly. The idea is to get iLogic to change the view using a simple If / Else statement.
This is what I tried:
If Parameter("0 Generic Assembly v2.2.iam.BP") < 1570 Then
ActiveSheet.View("VIEW1").Scale = 1/8
Else
ActiveSheet.View("VIEW1").Scale = 1/10
EndIf
So basically the value of "BP" parameter (excel parameter in my assy) would drive the scale of the views. But its not working. Is it actually a sensible method? Can I use in the drawing environment the excel parameters in my assembly?
This is the error message I get when the rule is run:
"Error in rule: View Scale, in document: 0 Generic Assembly v2.2.idw
Unspecified error (Exception from HRESULT: 0x80004005 (E_FAIL))"
Also using the same thinking I use iLogic to populate the drg number field on the drawing based on an excel parameter. The rule works but does not always updates the drawing no upon the parameter change or update/rebuild commands.
AutoCAD 2010 :: Change Block Attribute And Apply That Change To Multiples?
Aug 14, 2012i have tons of column tags but wants to change the distance between column size and the circle and make the font smaller. I can do this individually but can't do one by one..... is there any way i can adjust all by one command or one magic touch?
View 3 Replies View RelatedAutoCAD Inventor :: Creating Parts With Costs That Change With Dimension Change For BOM
Nov 16, 2011How do I create an Inventor part with a cost that will update according to the part dimensions changing. For example, we design products using aluminum extrusions and our cost is determined by foot length. How can I create the extrusion part to have a per foot cost that will dynamically update when I change the parts length for an assembly? It seems to me to be a fundamental need for many industries.
I will happily take any links to information that will explain this process. I cannot find anything online that clearly explains the process of creating parts with costs and variables.
AutoCad 2D :: When Change Scale On Object Property Mleader Arrow Head Didn't Change Size
Oct 17, 2013Mleader arrow head didn't change size when change the scale on Object property?
The Arrow head size didn't change corresponding to the scale, i included the pic below, the top picture, the arrow head was set at .18" but was really small when i plot out, so i wanted to make it bigger, when i changed to .50" or .75" or even 1" the arrow head became even smaller than .18". Only when .18" than the arrow side is legible
Mleader.jpg
AutoCAD 2013 :: Color Change / Didn't Change Any Settings
Aug 22, 2012I didn't notice when and why it happened, but now when i draw white line, it appears brown. I didnt change any settings, just did my usual work, when it appears. Other colors are normal. What could it be?
View 6 Replies View RelatedAutoCAD Inventor :: Hole Tolerance Does Not Change When Change It
Mar 1, 2013Trying to get the tolerance on a hole to be what I want. I changed the tolerance on the hole, but my idw did not change. When I went back and looked at the tolerance on the hole, it was back to the original value. No matter what I do, it will not change to what I want it to be in the part. Here is a short video.
The dimension I am changing is .9688 and it keeps jumping back to .9686 when I go back into the hole tolerance.
Tried other values too and they would not take either...
Entered Value Inventor Value
.9688 .9686
.9690 .9686
.9693 .9696
.9695 .9696
Windows 7 x64 -12 GB Ram
Intel i7-930 @ 3.60ghz
nVidia GTS 250 -1GB (Driver 301.42)
INV Pro R2013, SP1.1 (update1)
Vault Basic 2013
Lightroom :: Tethering Import (Auto) Forces Change To DNG - Can't Find Setting To Change
Mar 12, 2013I am trying to set up auto importing by tethered shooting with a Canon 1Ds (but don't think brand and camera matter.)
I never use DNG, and am not aware of, and after a lot of searching, cannot find anywhere in the LR4.3 preferences at which I specified DNG conversion. In the Auto0Import dialog there is a File-handling tab that offers one choice: how to spell the dng suffix. The files I want to import will come in as CR2., and testing this with other folder destinations and with Canon's EOS Utility prove that the camera is "sending" CR2 files.
Photoshop :: Quick Brush Size / Hardness Change - Anyway To Change Shortcut?
Apr 27, 2012The feature where you can quickly change a brush size/ diameter by pressing Alt + hold right click (for Windows) (In Mac, control + alt + left click) is neat but is there any way to change that shortcut to a different combination? I can't find it in the shortcuts list.
View 1 Replies View RelatedAutoCad :: Change Origin X / Y But Doesn't Change Origin Of Hatch
Jan 20, 2014As in the title, expected result in attached drawing. I'm trying to change Origin X /Y, but that doesn't change the origin of the hatch. It there a setting that controls it?
P.S. Is that drawing supposed to be 0.8Mb??
Illustrator :: Change JPG File To Vector And Change Black Linework To Red Using CS5?
Jun 28, 2012Below is a .jpg copy of the Vitruvian Man that I bought on istockphoto.com. I would like to get rid of the gold background and keep the black line work. I would like what was the gold background to be transparent. I would like to convert this .jpg to a vector file using Adobe Illustrator CS5. To do this I assume I somehow use the Live Trace feature but I'm not exactly sure how.
I would then like to be able to select the black linework and change it to red. Does this mean I need to somehow convert the drawing into a collection of indivdual paths and anchor points? When I've used Live Trace before, I had the tolerance set to about 45 and Simple Trace. This indeed got rid of the gold background but gave me no individual paths or points I could select and change the color of. The only thing I could select was the image as a whole, not individual points or paths. It was the entire image within a box. This occurred whether I used the black arrow tool (Selection tool ) or the white arrow tool (Direct selection tool). If no, then how could I change the black linework to red?
Photoshop Elements :: Can't Change Paper Type / When Try In Change Settings
Jan 6, 2013When I try to print a photo and use "Change Settings" to change from "plain paper" to glossy photo paper nothing happens.
View 3 Replies View RelatedIllustrator :: Can't Change Brush Diameter To Change With Pressure
Oct 30, 2011So, I haven't been using Illustrator (CS5) for a two weeks and I always create calligraphy brushes on the go, so I don't save them. However, out of the blue, I can't change the brush diameter to change with pressure nor the other options because they're greyed out.
Im using a Genius G-Pen M712X and mac osx 10.6.8..
Photoshop :: Select Some Words / Change Color And Other Words Elsewhere Change Too?
May 1, 2013I'm having in CS6..I have a text block with a couple of styles in it (headings have one look, body copy has another). Here and there, some words are on bold. When I select some bold words and change the color of them, some other bold words in some other paragraph also change color. Not all bold words... just some. The behavior is unpredictable, so the exact words that get changed will vary, but once it starts to happen it won't stop. When I try to manually fix the other words (hopefully I noticed them before my client!) and change them back to black, sometimes that change reverses the color on the original words too. Sometimes not; it's like the effect is sometimes two-way and sometimes one-way. It becomes a real logic puzzle sometimes, a maddening game where every change affects something else and you can't find the combination of actions that will do the simple thing you want.
I haven't noticed it happening with non-bold text, but that could just be coincidence.
When this happens, the only fix seems to be to rebuild the text from scratch in a new text box. (Copying it all and re-pasting it does not seem to work—unless possibly I paste into a different document entirely.)