AutoCad 2D :: Toggle Between Ortho On / Off - Measure Command
Jan 28, 2013
I have moved onto a new machine and there are 2 AC functions I need to change.
1. I used to be able to toggle between Ortho on/off by holding the SHIFT key, on this machine it doesn't activate. Is there a command for this? I know I could use F8 but my hand is over the SHIFT key when I draw so its easier to do it this way.
2. When I activate the MEASURE command AC automatically activates Dynamic Input which makes my cursor jumpy when I move it. How can I stop this from happening? To clarify, I don't want Dynamic Input on when I am in the measure command.
View 9 Replies
ADVERTISEMENT
Mar 30, 2013
My new HP laptop has functions assigned to the F function keys, and this disables the autocad functions for these keys. I am told by HP that it is not possible to turn off these functions to allow cad to use them. I just tried working without using the F3 and F8 keys, and I am crippled. How can I assign another key - say Q - to toggle ortho?
View 9 Replies
View Related
Oct 8, 2011
know whether one can enable 'ortho' whilst specifying points using 'WIPEOUT' command?
View 5 Replies
View Related
Apr 19, 2012
(see attached)
I have what seems like an odd, but needed request here. I have an engineer that is looking for a way to measure between two lines that are not co-planar, but he wants the measurement in a specific plane.
Basically he wants to be able to select a plane or line, then be able to select the second plane or line and have the tool automatically "project" it to the plane of the first selection and give the angle in that plane.
Ref the attached - the purple lines are in the XY plane, the blue line is not, but he wants to measure the angle from the X axis to that line but in the XY plane as seen by the green line that was manually projected to that plane.
Without having to manually create a sketch and project the entities that need to be measured (this example is an extremely simplistic one), how can this be done? Measurements in this way need to be done in numerous complex angles.
He's claiming Catia, Pro/E and of course, SW can all do this "project" within the measure tool. I figured if that's indeed the case, Inventor sure be able to.....JD, you're the resident expert on SW & Inventor....do you know what I'm referring to?
View 5 Replies
View Related
Feb 11, 2013
I am trying to add the measure command which adds nodes / points to what I select to the tool bar and it wont let me do it when I select it out of the commands search box.
View 3 Replies
View Related
Sep 19, 2013
Inventor 2014.
When you measure something with the distance command, according to the type of file, the last zoom you did, your graphic card and probably the speed of the wind, the little red line won't show.
Normally when you measure something, a thin red line is shown were the distance is calculated. But in my laptop, and both pc's of my client, Inventor shows this line only in parts, not in assemblies. I've got a Quadro 2000M, my client got Quadro FX 1700 and 1800, all with the recommended drivers.
So I tried with 3 other laptops. On one of them (with a K2000M) if you do a measure right after the file open, it give you the line, if you zoom with the measure command open, the line disappear and won't show again until you close and open the file again. But if you zoom without the command active, the line is shown normally. But it's not working like that on all machines.
View 2 Replies
View Related
Jul 18, 2013
How to use the divide and measure command , and also I knew how to change the point style. But after I used the divide command to split my object into 5 parties. I can not click the point I created.
For a instance I have a 10 meters line and I used the divide command to divide it into 5 parties, and so I have 4 points. But if i want to draw some thing on the new point my mouse could not click it.
[URL].......
I cant do what the guy did in the video. when I move my mouse on those points I created I could not connect a line on the point like the guy did.
View 3 Replies
View Related
May 9, 2012
I want to add the Measure (Distance) command to my quick access toolbar. When I right click on the Measure button the "Add to quick access toolbar" is grayed out in 2013.
Also why can't they make it so when I add something to the quick access toolbar stays added to all file types. I have to add it to .ipt, .iam, .dwg...
BTW Not real impressed with 2013 so far.
Using Inventor 2013
View 2 Replies
View Related
Nov 28, 2011
I am trying to create a lisp that prompts you to select multiple lines, and then prompts to enter a name of a block you wish to use. With that information use the measure command to place the entered block along the selected lines with the spacing set to the value in the blocks attribute.
I have a lisp that does most of this with the exception of the extracting the value of the block size to use as the distance between blocks, the current lisp just prompts for the distance.
I have a lot of blocks with different spacing so it is hard to remember the distance.
Here is the current Lisp i use:
(defun c:MEB (/ blk ss l name)
; TharwaT 04. 04. 2011
(if
[Code].....
View 9 Replies
View Related
Feb 4, 2013
how to change ortho on /off key from F8 to other key i want to set it by digit " 5 "
View 9 Replies
View Related
May 18, 2011
I'm using Autocad LT 2012 and ortho is only working vertical. Circles appear as straight lines and arcs won't draw at all. If I copy an object or text from another drawing, it pastes as a straight line. I also can't rotate anything except vertically.
View 3 Replies
View Related
Sep 7, 2012
If I have images in my dwg, and I want to temporarily use the shift key for ortho, it doesn't work. On the cammand line, it reads, "Image (s) not selected. Select Images (s) then issue command." I am not trying to manipulate an image. Why is it defaulting to an image object?
Civil 3D 2013
Windows 7 64-bit
Inteel 2.40 GHz 8 GB RAM
Dell T7600
View 3 Replies
View Related
Mar 19, 2012
I am having a problem this morning. When I started AutoCad LT 2012 and opened my drawing, I can only draw a line in one direction. Also, when i insert a block, all I get is a flat line.
View 3 Replies
View Related
Jul 22, 2010
I just got a new dell inspiron laptop and installed ACAD 2011. Normally I draft with the ortho lock on and hold down shift when I want to disable it temporarily. With my new laptop this doesn't work. Holding shift down doesn't seem to make any difference at all.
View 9 Replies
View Related
Aug 20, 2013
How to get the properties of plant 3d ortho block?
AutoCAD Plant 3d 2014
View 2 Replies
View Related
Aug 29, 2012
I am using Ortho Mode F8 on. This has been giving me perfect lines on screen. Now for some reason i have kinks in almost all my straight lines. I am sure i have hit some setting. Also I have lived it with so long I cannot use undo.
View 5 Replies
View Related
Dec 14, 2013
Is there a quick way of achieving the following:
You have an object rotated at an arbitrary angle
You want to rotate it back to a 90 degree line by snapping it.
I can do this by measuring the arbitrary angle and then rotating it manually based on my measurement.
View 9 Replies
View Related
Mar 21, 2012
I am running AutoCAD 2012 and i am having a problems with drawing a line.The problem i have with it, i have changed some settings and i can't remember what i changed. But how to change it back.
First let me explain what i am talking about. Once i am in front view and trying to drawing a line vertical and with ortho on, it will not allow me to draw a line vertically either up or down, only horiztonal. It looks like to me that ortho is lock on top ortho only.
View 7 Replies
View Related
Aug 10, 2013
I can't use F8 key for Ortho mode in Auto Cad 2012. I checked CUI and it seems to be ok but when I press the F8 key It doesn't work. as matter of fact, after pressing F8 key, line type manager window is opened!
View 9 Replies
View Related
Apr 14, 2011
I have a student who is using AutoCAD 2010 and has Ortho set to on and for some reason it does not draw straight horizontal or vertical lines. They are off by about 5 degrees.
View 9 Replies
View Related
Dec 17, 2012
Any way to permanently disable polar. Like if autocad were to automatically switch to ortho every 10 mins or something?
View 5 Replies
View Related
Aug 22, 2013
I would love for my 2011 and 2013 to work the same as my 2008 does.
In 2008, when I grab a grip and stretch it with either ortho or polar turned on, I get a little tooltip beside the crosshairs. All it says is the distance and the angle, and whether it is Ortho or Polar. For example, if I stretch to the left with ortho on, it may say
Ortho: 16.55 < 180°
Or if I stretch up and to the right with Polar on, it will say
Polar: 16.55 < 45°
I really, really really want this back! This is not dynamic input, I hate all that ridiculous clutter around my crosshairs. But this little info box is absolutely invaluable!
I have checked the Tooltip setting (on in all versions), And I've been playing with all the Dynamic Input settings, but I can't get it to work. The odd part is that 2011 was working until about a week ago. I'm not sure if 2013 was or not.
View 9 Replies
View Related
Jan 4, 2013
Thats pretty much it. While pressing F3 to toggle Osnap, if Ortho is ON it first turns it off and then F3 would toggle Osnap. The same thing happens with F8 if Osnap is ON.
I checked out the CUI and for some reazon it had a lot of different shortcuts to toggle Osnap and Ortho, so I thought just keeping F3 and F8 would make it work, but it does the same thing.
View 5 Replies
View Related
Nov 5, 2013
I want to do a simple thing : drop ortho-photo on surface generated from contour line.
First thing, I need the basic terrain. I did import my contour line in a new draw, using the import map feature. I then saved the draw under the name " topo ". At this point, the contour line are 2D break line with no elevation.
I then opened a new draw to which I did associate my draw " topo ". Then I used a query to modify the elevation of the line using the attribute " contour " in my table, thus resulting in my breakline to become 3-D. It works fine. Then I save the new draw as " 3D_Topo ". I then get a warning :
" The association between objects interogated in the current drawing and associated will be deleted once the current document of the draw is closed " (I made the translation from french to english, in french it stated like this : " L'association entre des objets interrogés dans des dessins courants et associés sera supprimée une fois le fichier de dessin courant fermé. " ).
Well question #1 : What does this warning mean / imply ?
Then, I have those .ecw files as ortho photo which I want to import. So I use the function " connect " with raster image, then I select my file, then I " add to draw ".... then something very strange happens.
Sometime, the image appears correctly...and some other times I get nothing and I get this " disconnected " message in the task pane ..and no matter how many time I actually connect again the .ecw files, it will not happen in the draw ! Then I simply close the draw, start map 3D again, then I do the exact same thing, and sometime it works, sometime it doesn't.
Question #2 : any clue on why the .ecw files sometime works, sometime doesn't?
Now, let's assume I finally made it to connect correctly and that Map3d didn't crash whilst I was doing it (because I don't know for you, but here, it does happens quit often), I now have (as shows in the picture I attached) two thing. A surface made (well, I went back in the civil 3-D module to make the actual surface from the breakline definition) with the contour line and a imported image. I now want to drap the image on my surface! So I use the option " drap " which is in the surfaces option (in the ribbon surface tools)... well it looks nice since it propose me to use the surface I made up with the contour line as the base and the imported .ecw files as the file to be draped upon. So I simply do that and.... well...nothing happens! My image isn't draped at all, it stays there,
Question #3 : How should I proceed to actually drap my image over my surface ?
Question #4 : Considering I made it to drap the surface, how can I save this new draw independently of the attached other draw or database?
View 5 Replies
View Related
May 8, 2011
I use images in this new version of map 3d, I can't seem to toggle the selected images on/off.
View 2 Replies
View Related
May 14, 2011
I cannot seem to find a way to toggle between two lines that are on top of each other. I am in 2012 TL.
View 9 Replies
View Related
Jan 26, 2013
Is there a way to toggle snapping to a layer or xref?
When using object snap and you are drawing with a busy survey xref in the background, the mouse cursor really hunts around a lot on the contour lines and stuff instead of on what I am drawing. But, I would like to see the contour lines as I go, rather than hide the layer.
View 6 Replies
View Related
Sep 19, 2012
I used to be able to open up 'Windows Explorer'-style boxes to select files and type in file names to save. Now, I must have toggled some option to only do this through the keyboard and mouse.
View 3 Replies
View Related
Sep 26, 2013
Is there a way to add a toggle button to the applications status bar? I would like to be able to quickly toggle the frameselection on and off.
View 0 Replies
View Related
Apr 18, 2011
I am using Autocad 2000. I know, I am like an old dog who gets comfortable by the fireplace, and is happy with what I have. where the toggle is to set the dimensioning for metric dimensions. I have seen it in a couple of places and after I set it for millimeters, for some reason it still dimensions in English measurements.
View 3 Replies
View Related
Sep 27, 2011
i use section planes quite a bit and if you're familiar with planes than everytime you insert a new section plane the settings reset. i would like to insert into my template 3 section planes each with my custom settings one being for plan one being for front one being for side. each being on a seperate layer. i would like to create a macro along with a toolbar that toggles a particular layer on and off. how do i do this? using the same shortcut to turn the item both on and off? to toggle....
View 6 Replies
View Related
