When I rotate my view in drawings containing .sid orthos, the orthos shift. This also happens when I rotate the view in a viewport. I've attached a couple screen caps showing the problem.
View 6 RepliesI have created a profile. I have my surfaces, projected other surfaces onto it, looks good. So then, I want to do some simple drawing on my profile. Everything looks good in model space. Create a viewport for the profile and things(basic linework) appear in a different location than where I drew them. I figure I need to project an object to make it work because they are associated.
So I draw my simple arc ( arch culvert) with footings and block it. great its where i want it and its a block. Gave it the appropriate elevation when creating the block. go through the project objects and it added. But now its added it in a different spot.
I'm having trouble creating a map book where north is rotated in the view. I've tried using ucsfollow, and the ucs command to rotate the map correctly, but when I try to create the map book the map doesn't show up in the main viewport.
How to rotate the map when creating a map book?
In modelspace I have a drawing that is aligned perfectly, but when I create a new viewport in a layout the drawing that was created in modelspace seems slightly rotated in the layout view?
View 3 Replies View RelatedI have a plot plan, that is rotate about 31 degrees off true north. So when I draw inside the plan, I rotate the UCS to be able to follow a "plant" north.
> UCS > point 1 > point 2 (along x axis) > point 3 (along y axis)
> PLAN > enter > enter
Now, I'm trying to measure a distance between 2 points with my drawing rotated along a new UCS. However, it keeps giving me the measurements as if it were still in the WORLD UCS.....so my x and y values are weird numbers instead of the nicely rounded numbers to which I have offset from a certain point.
> DIST > point 1 > point 2
How do I get my distance to show me what the x and y distances are in the UCS that I have rotated to, instead of showing me the x and y distances based on the WORLD UCS?
The files in my sheet set manager model view is not in alphabetical order? Any way to get it in aphabetical order?
View 2 Replies View RelatedI have read many topics that talk about TTF text printing bold under various circumstances, but have not found one addressing my exact issue. I have attached a PDF with which I hope to illustrate my problem.
I have a non-annotative, Scale = 1, all elevations = 0, block; My text is PDF's as text whenever the block is left at 90 or is exploded then rotated. But whenever the blocked is rotated (any amount) the text is no longer interpreted as text, it prints bold.
I need to be able to align my blocks to other, rotated, objects in both model and paper space; so this issue is causing my a fair amount of grief. I have been told switching to a shx font is out of the question.
Someone new needs to use our drawings, and requires DXF. However this end user has requested that our landscape drawings be rotated to portrait for their use.
Without having to alter our entire drawing to accommodate, is there an easier way?
We have some blocks that have static text labels on the left and numeric attributes on the right. When these blocks are rotated so the text is near vertical the static text has a bold appearance.
If you explode/burst the block then this 'bold' appearance goes away. If you rotate the text to normal then the effect disappears as well. The bold appearance shows up on a plot as well. The effect is subtle at times but noticeable.
Sample drawing attached, see the block near the top of the drawing and a copy of it rotated to normal. Use the BURST command on the block on the left to see the change.
Is it possible to get grip points on a circle at 45-dgree increments rather than at 90-degree increments - that is, at 45, 135, 225 & 315 degrees? (Preferably in addition to the 90-180-270-360 grips, but temporarily instead of would work also)
View 9 Replies View RelatedI received the attached drawing file "A" from a surveyor that was created in an earlier version of AutoCAD (approx 2000). The attached drawing is rotated so that the view in Model Space shows the cross-hairs with north pointing northwest. There are points included within the drawing that do not match the coordinates of the surveyed points within the attached ascii text file. I would like to rotate the drawing so that the points match the coordinates in the ascii file and North follows the y-axis.
I have imported the points from the ascii text file into a new drawing file "B". I external referenced (overlay) the new drawing file B into drawing A. I tried moving all of the objects in the drawing file A (with MOVE) to a known point coordinate and then rotating (ROTATE) the objects to two known points. I don't know how to select all of the objects in drawing A and not the external reference in drawing B so that I may Rotate only drawing A objects.
How to move and rotate the surveyors drawing A so that I may match the coordinates in the ascii text file.
I've attached an image of my problem for reference. I've had this problem in other versions of CAD so it's likely a user error that I'm not clear on how to fix.
I have several dimensions which I'm trying to place on my drawing through VPMAX in my viewport, but the text keeps showing up upside down. When I manually tell it to rotate 90 degrees, the text remains upside-down but the landing becomes vertical. When I rotate 180 degrees, the text becomes vertical which isn't really useful. Rotating 270 degrees almost solves my problem, but the landing is once again vertical.
If it matters, the UCS coordinates have been rotated 90 degrees for ease of viewing in paper space.
I just got a new dell inspiron laptop and installed ACAD 2011. Normally I draft with the ortho lock on and hold down shift when I want to disable it temporarily. With my new laptop this doesn't work. Holding shift down doesn't seem to make any difference at all.
View 9 Replies View RelatedI've placed generic Junction box structures right out of the box from C3D and when I cut a section, the section shows the wrong side of the structure. (Rotated) i.e. An inserted 60”x36” junction box inserted as a curb inlet and then rotated into position will display the 60” side even though it’s perpendicular to the section line.
I've had to go back and place a 36”x60” to get it to display the 36” side in section? Why is there a “rotation handle” on the structure if you can’t really rotate it?I really don't want to swap all 60"x36" with 36"x60" structures just so they will display properly in section.
Inside the trim command I cannot hit "shift" to switch to the extend command instead.
View 6 Replies View RelatedI have a dwg that looks great in model space, however I created a couple paperspace layouts and then used Align Space to rotate to those views. The problem is that my point label style rotates the point labels based on the align space rotation.
I looked into the point label settings and changed the orientation reference to the World Coord. Sys., but it does not make the points rotate correctly. (world reference is the goal).
I have cut sheets following my alignment. I would like the mleaders I place in model space to be at zero rotation when I go to the individual sheets. Works fine for text if I check the "Match text orientation to Layout" box, but not for the mleaders. Is there a setting I am missing?
View 7 Replies View Relatedi have an area we are running water lines in and are using the aerial as the survey kind of - so it is important that it not shift - but the viewport needs to be rotated
View 9 Replies View RelatedNew hardware and fresh upgrade to v2011.
All computers will show the osnap menu when we shift+right click but one computer shows the regular short-cut menu.
How do i make the osnap menu appear with a shift+right click?
My Application Migrate from AutoCad 2008 to 2011.Shift right click osnap menu is not pop up.
View 3 Replies View RelatedSo this really doesn't have much to do with objects in a drawing. Say for instance, I go into the PURGE dialogue box, and I want to select multiple layers to purge, but not all of them. If I click a layer, and the hold CTRL and click other layers, the only one that stays highlighted is the one I just clicked...so using CTRL doesn't allow me to highlight multiple entities at the same time.
It's gets a little more weird using SHIFT. The conventional SHIFT method (works in Windows Explorer and other applications) is clicking an object, holding SHIFT, and then clicking another object further down the list...this will highlight both of those entities clicked, plus every single entitiy in between them. In AutoCAD (use the PURGE dialogue box again for reference), if I click an object, hold SHIFT and click an object down the list, it will highlight the last object clicked and everything in between the two, but it will deselect the original object. Also, if I use SHIFT to select multiple objects, and then go back to the original that was deselected and hold CTRL to select it, the last object that was selected using SHIFT gets deselected.
Is there a system variable for holding down shift and picking multiples?
When picking multiples files, to bring in xrefs, I can pick them, but some of the other in the office can not, it want let them pick more then one file at a time.
I have a drawing I am working on regardless of whether I use DVIEW Twist or UCS rotate I encounter the same issue. I start with MTEXT that is parallel to my intended view. However, as soon as I make it annotative and set it to Match Layout the text rotates 90-degrees and is no longer plan readable.The text lives in model space, not paper space. I've even roated the layout viewports in this specific drawing to match, and the text appears correct when viewed through a viewport, but when I jump back to model it is turned on end 90-degrees again! Have I missed a setting somewhere? Shouldnt the text reamin oriented with current view in model space?
I am uploading a link to a video which shows this problem in detail. URL...
I have a drawing where i am not able to select multiple grips using shift/pick to make the grips "hot". I'm not able to make even one of the grips of a poly line "hot". However, while trying to solve the problem, i've opened another drawing where i AM able to make grips "hot". It doesn't appear to be a system setting issue.
View 6 Replies View RelatedSo I have a survey of a roadway that was created 15 years ago and was converted into autocad civil 3d 2012. No problems there, however, I am going through the survey and rotating the COGO points (ie Traffic Signs, Utility Poles) and the text to be parallel to the roadway. I am in UCS World and have no problems rotating the points and text to what I want. THe problem starts when I rotate the drawing using UCS 3P so that I am looking at a portion of the roadway that is parallel to my computer screen. Now the text and orientation of the signs etc are no longer parallel to the roadway and did not rotate when I rotated the entire project.
Now I was under the impression the points were to rotate automatically to what I set them as, ie parallel to the roadway. I'm sure this is an easy fix or I am not understanding something.
I'm working in Civil 3D 2012 and when I print to a .PDF with rotated views, the .PDF file is very large compared to file with non-rotated views. how to control the file size?
View 4 Replies View RelatedIf I have images in my dwg, and I want to temporarily use the shift key for ortho, it doesn't work. On the cammand line, it reads, "Image (s) not selected. Select Images (s) then issue command." I am not trying to manipulate an image. Why is it defaulting to an image object?
Civil 3D 2013
Windows 7 64-bit
Inteel 2.40 GHz 8 GB RAM
Dell T7600
I'm looking for a way to determine (and preferably edit) the values of P1 and P2, the offsets of the initial tangents into the PC/PT of the shifted curve. It's not in the (admiteddly basic) book I have either.
[Edit: OK, after double-checking,I just found Widening offset clothoid, but I'm still none the wiser.]
Mapimport command maintains integrity of x,y coordinates. Adding dem information to a civil3d TIN surface does NOT.
Detailed screen shot(s) attached.
Detailed:
I am trying to create a tin surface in autoCAD from a raster dataset in GIS. Originally, my raster dataset was in UTM's (Zone 10N), and my CAD drawings were in CA State Plane (zone 2, US feet). Both NAD83. But I have, to date, been unable to get AutoCAD to correctly convert between these two coordinate systems. I thought, hmm.. let's just convert to State Plane in GIS and then add to the surface definition in AutoCAD. I had hoped this approach would 'go easy' on autoCAD as it would not need to do any conversions. Turns out, that does not appear to work either. In fact, it is even further 'off' than before... I hope the attached PDF illustrates the situation clearly. AutoCAD's mapImport command works great. The surface boundary can be imported and appears to have the correct coordinates. The surface, with the dem added to the definition, however, does not. It is shifted down and to the left.
My shift not working when I have some objects selected and I want to deselect something. I have the c3d 2014 with raster image. I am new to autocad and c3d and I am trying to learn from videos I find in youtube. I saw even the autocad help that mentions the shift to deselect but why this is not working.
View 4 Replies View RelatedCivil 3D 2013, SP1, Windows 7, 64-bit -
I've got a user who imports points into the survey database and RANDOMLY the points will be shifted on average 27 feet in the northing and 4 feet in the easting. She notices this because she'll check a point and see tht the northing and easting varies from the grid northing and easting (I've attached an image to view) She will then discard the drawing and begin a new one only to import the data and now it imports correctly. The behavior is completely random and it's happening on multiple projects.
All the projects begin with the same template. All the settings (drawing settings and survey settings) have been set to US Survey Foot. It's weird because once the issue is noticed it can be fixed by simply beginning another drawing and re-importing the data, but it has happened on projects where she's already got pre-existing data.