AutoCAD 2010 :: UCS Coordinates Have Rotated 90 Degrees For Ease Of Viewing In Paper Space

May 17, 2012

I've attached an image of my problem for reference. I've had this problem in other versions of CAD so it's likely a user error that I'm not clear on how to fix.

I have several dimensions which I'm trying to place on my drawing through VPMAX in my viewport, but the text keeps showing up upside down. When I manually tell it to rotate 90 degrees, the text remains upside-down but the landing becomes vertical. When I rotate 180 degrees, the text becomes vertical which isn't really useful. Rotating 270 degrees almost solves my problem, but the landing is once again vertical.

If it matters, the UCS coordinates have been rotated 90 degrees for ease of viewing in paper space.

View 2 Replies


ADVERTISEMENT

AutoCAD 2010 :: Paper Space Plotting - Text Rotate To 90 Degrees

May 18, 2012

I've created a drawing in model space, added text in paper space. When I go to plot the drawing the text is rotated 90 degrees instead of staying oriented the way I added it. There must be some setting that I am missing somewhere!

View 9 Replies View Related

AutoCAD Architecture :: Creating Text In Model Space It Appears Both Mirrored And Rotated 90 Degrees To The Horizontal

Oct 11, 2011

When creating text in model space it appears both mirrored and rotated 90 degrees to the horizontal. However, when I create text in paper space it is fine. I have tried looking at the properties for the text but although I can find a place to rotate the text back to the horizontal it is still mirrored and therefore unreadable.

When I copy paste stuff from one document to another this also occurs.

View 4 Replies View Related

AutoCAD Dynamic Blocks :: X Y Coordinates From Model Space On Paper Space?

Nov 5, 2013

I'm trying to create a block that reads the x and y coordinates of a point from the end of a leader. Which is fine and easy enough if I use the block in the same space.. ie model space or paper space (layout tab).

However I wan't to be able to capture the coordinate from the model space, through the viewport, and pass it onto the block in Paper Space. Is this possible?

Or is it a case of having to use a more LISP based approach? 

View 2 Replies View Related

AutoCAD 2010 :: Circle Quadrant Grips Rotated 45 Degrees?

May 31, 2012

Is it possible to get grip points on a circle at 45-dgree increments rather than at 90-degree increments - that is, at 45, 135, 225 & 315 degrees?  (Preferably in addition to the 90-180-270-360 grips, but temporarily instead of would work also)

View 9 Replies View Related

AutoCAD 2010 :: Changing Between Model Space To Paper Space Locks Application

Apr 12, 2013

In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.

In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.

I can log into another user's computer and open the file fine. But when i use my computer or a brand new computer fitting all Auto CAD specs, it locks up. When I plot I have to reset my settings to the PTE standards every time.

I now get CAD errors when CAD is not even open. Also VTPSUHM barely works. I generally have to restart my computer several times to get it to work.

View 9 Replies View Related

AutoCAD 2010 :: Fields In Model Space To Paper Space?

May 2, 2012

determine if Fields can be used in model space inside a block and show up in the paper space view as a correct number, (say for a detail number)? I have all of my detail blocks in model space and would like to place fields in the title blocks of the details so that they would show the paper space sheet number that they are being shown on in paper space. I have done some experimenting and cannot seem to get it to work. Or will this just not work?

1.- Details in model space are blocks, and I want to edit the block and insert a field into the detail callout.

2.- I want to have the model space detail read the paper space drawing number, and have the fields change to the proper sheet number.

3.- The result will be the that the model space block fields have changed to the proper detail sheet number shown on the paper space border.

View 4 Replies View Related

AutoCAD 2010 :: Model Space / Paper Space Display

Mar 15, 2012

I have a drawing that has several Paper Space tabs, and each tab has one or more viewports.

When I open the drawing, I can see all the information in Paper Space mode, and I can access the Model Space through the viewports, using the MS command. When I switch to Model Space, nothing is displayed.

View 4 Replies View Related

AutoCAD 2010 :: Multileaders In Paper Space But Want In Model Space?

Mar 13, 2012

So I just recieved drawings from a contractor and they placed all the multileaders and details on the paper space but when I go to change the model space things are no longer pointing at the right spot.

What I am trying to do is copy them into model space but.... when I use crtl-c from paper, crtl-v to model it doesn't scale properly.

View 1 Replies View Related

AutoCAD 2013 :: Rotated Crosshair Cursor - 30 Degrees Counterclockwise

Feb 28, 2013

I admit that I have used AutoCAD for several years now, but I have very, very little experience with 3D applications and needing to alter the typical horizontal/vertical coordinate system.

What I have is a file that, though the lower-left icon is horiz/vert, my crosshairs cursor is tilted approximately 30 degrees counterclockwise. This file, I believe, did originate in AutoCAD Civil 3D, so who knows what was done there. But, how can I get my crosshairs straightened out once more?

I have noticed a relation with the UCS and the cursor, when I've played with Orbits. I just can't grasp what that relationship is. 

View 9 Replies View Related

AutoCAD 2010 :: Dimensions In Paper Space

Feb 16, 2012

I had the need on occasion to dimension in Paper Space. I set up a "Dim Style" to accomplish this in either 1/8" or 1/4" Scale. The problem I am having is the consistency of the actual dimension. 

For example: I could draw a simple box 10'x2'. When I dimension in Paper Space, sometimes it correctly displays the dimensions and sometimes it incorrectly displays the dimension.

I attached 2 screen shots of what is happening. Notice the dimension on top of the box shows 10', but when I dimensioned the bottom of the box it shows 480'. This seems to work at random.

The other screen shot shows the Dim Style settings I used.

View 2 Replies View Related

AutoCAD 2010 :: Border Onto Paper Space

Jun 27, 2012

i have been sent a border from my client which has been drawnt in model space and they are asking the border they sent me for my drawings to be inserted into Paper space. When i insert the border into paper space the border is way to big for the paper space and i dont know how to make it fit ISOA1 size.

View 2 Replies View Related

AutoCAD 2010 :: Snapping In Paper Space

Jul 8, 2013

We detail an extensive amount of 3D solid entities using viewports in layout tabs.  Most of detailing entities are in model space, things like dimensions, part callout, and other text entities that provide description as to what's going on in the viewport.  Periodically, there is a need to create entities in paper space.  Lets say for example, I'm zoomed out to the layout of the page setup, and I have a viewport with a lot of 3D solid entities.  Still zoomed out now, I want to add an icon to the corner of the viewport.  When I invoke the "endpoint" osnap to insert my icon at the viewport's, without zooming in, and try to pick a corner of the viewport, the icon gets inserted to an endpoint of an entity that's in model space.  What a pain in the behind.  The only real work-around is to zoom right into the corner of the viewport, which defeats the whole point of osnaps in the first place.

I remember this not being the case.  Did AutoCAD introduce a variable and set it's default to something that I don't it to be, or is this a screw-up of AutoCAD?

View 5 Replies View Related

AutoCAD 2010 :: Printing In Paper Space

May 1, 2012

I reloaded my CAD and now I have a black background in paperspace. This is what I want but I want it to print white while haveing a black backgroud for drawing. How do I do this?

View 3 Replies View Related

AutoCAD 2010 :: Put Dimension In Paper Space

Jan 19, 2012

I am attempting -- without much success -- to put my dimensions in paperspace. The problem is that sometimes (almost always) the dimension value is in paperspace. That is, when I do a Linear Dimension of two points of an object while in paperspace the resulting value will be a few inches instead of many feet. 

My model is drawn at full size; my viewport is set to 1/4" = 1'-0"; I am using ACA 2012.

I am not sure if it instructive, but I have found:

- The only time it comes out correct is if my first point is at 0,0. But if the second point is 0,0 it will be wrong (paperspace value). Bizarre
- most of the "wrong" dimensions have the "Associative" property set to "No". The box is grayed out so I am not sure how to change it.
- If I MEASUREGEOM, the value is the correct model space length but if I do a linear dimension using the same two points the value is in paperspace.

View 9 Replies View Related

AutoCAD 2010 :: Paper Space Dimensions?

Jan 26, 2012

When dimensioning in paper space and move or make any adjustment to the viewports the dimensions go haywire and move of the parts but not all dimension and not all viewports are doing this. I'm using the same dimension style and templates that I normally use.

View 2 Replies View Related

AutoCAD 2010 :: Dimensioning On Paper Space

Aug 15, 2012

How to change your settings so that when dimensioning an object that is in model space, while floating over it in paper space, it will give you the actual dimensions in model space?

Seems that it should be a variable setting or something you can change in DIMSTYLE.

View 4 Replies View Related

AutoCAD 2010 :: Paper Space Background Color?

May 11, 2011

way to change the background color (color outside the "paper" in paperspace?

The light gray that I can't seem to change, is suboptimal for me. 

View 9 Replies View Related

AutoCAD 2010 :: Draw Dimension In Paper Space

May 22, 2013

I'm trying to draw dimensions in paper space but:

It's not possible to work with annotation dimensions on paper space?

Using the traditional way and neither. Because AutoCAD 2010?

View 3 Replies View Related

AutoCAD 2010 :: MText Not Showing Up In Paper Space

Sep 5, 2013

My mtext that i have created in model space is not visible in my paper space viewports. What can i do to fix this?

View 5 Replies View Related

AutoCAD 2010 :: Multileader In Paper Or Model Space?

Nov 9, 2013

in general, I add my multileaders in paperspace after I have set my model space scale.  However, I am now bound to that scale! That is, ML in paperspace really only have one scale: 1-1, right? For example, I wanted to zoom in to a part of my project (ie, reduced my scale by a 1/3) and all my ML we pointing erroniously into space.

Just so I undestand, if one anticipates changing the scale of a drawing mid-project, the ML should be made annotative, and placed in model space?  

View 1 Replies View Related

AutoCAD 2010 :: Model Versus Paper Space

Aug 16, 2012

I received a drawing form a vendor that is in 3d (27 meg)...this drawing contains the model and 4 paper space sheets.

These sheets contain different pieces of the 3d model.  I need to create four 2d drawings (one for each sheet).  I have tried "export layout to model" with no luck as most of the drawing does not export.  I have tried to copy to clipboard but, drawing is too large for the clipboard.  I have looked in the "help" and there seems to be nothing on converting a 3d drawing to a 2d drawing or extracting indivigual sheets to a 2d format model.  I have tried exploding the information on the sheets in order to get everything to export but that doesn"t work. 

View 2 Replies View Related

AutoCAD 2010 :: Dimensions Keep Changing In Paper Space

May 10, 2013

I am on ACAD 2012 overlaying dimensions in paperspace to objects in model space..The dimensions keep changing to an incorrect number..Can't identify when it is happening yet. The dimensions are always larger

If I change dim style and back again the correct dimension appears. I can then matchprop to get the other dimensions to appear correctly. But twenty minutes later they are all changed again

I turned of Annotative scale for dimension features and use overall scale of 1.

View 8 Replies View Related

AutoCAD 2010 :: Ltscale In Model And Paper Space

Apr 24, 2013

I've picked up someon elses drawings and for some reason in paperspace the ltscale is set to 10. i've tried changing the global scale factor to 1 in the linetype manager but it keeps changing back to 10 when i tab through the different sheets.

i normally have both  my ltscale and psltscale set to 1 in paper space (and celtscale=1)  and have a custom macro asigned to a button for my modelspace views ie 1.100,20,10 etc and a macro/button setting the ltscale back to 1 when returning to paperspace and this worked nicely.

why the global scale factor keeps reverting back to 10?

View 2 Replies View Related

AutoCAD 2010 :: Paper Space Viewport Not Selectable

May 17, 2013

 When working in paperspace existing or new layout viewports are non-selectable. The viewport boundary is not visible and all layers are turned on and thawed. Is there some sort of toggle to make viewport boundarys visible and selectable?

View 6 Replies View Related

AutoCAD 2010 :: Paper Space In Black / White Mode?

May 7, 2013

In paper space, some of my drawings lose color palette showing only black and white, some others not. How can I change the settings make all drawings looking unanimous in colors?

View 4 Replies View Related

AutoCAD 2010 :: Rotating Paper Space View (not Just Viewports)

Jul 31, 2013

I have wall section sheets that are best viewed in portrait mode, but use the same landscape page setup as the other sheets in the set.  So the viewports for the sections are rotated 90 degrees and difficult to read on the screen.  Is it possible to rotate the paper space UCS and rotate the paper space "view" to match the UCS, like you can in model space? 

I don't want to rotate the viewports and title blocks themselves & set up a portrait page setup.  This is because I'm using Acrobat's PDF maker for batch plotting and not using the same page setup for each sheet makes one click, fire-and-forget publishing impossible.  And I don't want to use DWG-to-PDF because it doesn't have any configurable image compression settings that I know of.

If it's not possible, then it's not the end of the world.  We have AutoCAD Architecture and AutoCAD LT 2012 & 2013. 

View 6 Replies View Related

AutoCAD 2010 :: Finding Paper Space Tabs And Model Tab?

Aug 20, 2012

I just changed jobs to a company that uses MEP2012. It seems as though it is not possible to revert to Acad classic with this version. So, I am trying to mimic classic as much as possible.

One of the challenges I have found is finding the paper space tabs and model tab? it used to be directly above the command line, is there a command to turn it on?

View 9 Replies View Related

AutoCAD 2010 :: Making Paper Space Pages Into PDFs And DWFs?

Dec 5, 2012

How can I convert drawings on paperspace into PDFs and DWFs with the correct scale?  I measured everything on paperspace and it's right; but if I convert them to PDFs and DWFs everything srinks a little and the scale doesn't match at all.  What settings or ways to match the scale into what it's suppose to be to convert it to PDFs and DWFs?

View 4 Replies View Related

AutoCAD 2010 :: Line Type Not Showing Up Properly In Paper Space

Jan 27, 2011

My "center" line shows up fine in model space, but just solid lines in paper space. 

View 7 Replies View Related

AutoCAD 2010 :: Paper Space Dimensions Changing On Opening File

Jun 11, 2013

I am on ACAD 2012

I am using paper space dimensions and have a problem that they keep changing

I have attached a drawing demonstrating my problem. The square is 12' x 12''. Everytime the file is opened DIM SCALE LINEAR is multiplied increasing all dimensions by the multiplier. It does this each time the file is opened.

You can right click  remove overrides on the dimension to get it to appear correctly (I don;t have any overides the software is overiding on open.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved