Is it possible to get grip points on a circle at 45-dgree increments rather than at 90-degree increments - that is, at 45, 135, 225 & 315 degrees? (Preferably in addition to the 90-180-270-360 grips, but temporarily instead of would work also)
View 9 RepliesI've attached an image of my problem for reference. I've had this problem in other versions of CAD so it's likely a user error that I'm not clear on how to fix.
I have several dimensions which I'm trying to place on my drawing through VPMAX in my viewport, but the text keeps showing up upside down. When I manually tell it to rotate 90 degrees, the text remains upside-down but the landing becomes vertical. When I rotate 180 degrees, the text becomes vertical which isn't really useful. Rotating 270 degrees almost solves my problem, but the landing is once again vertical.
If it matters, the UCS coordinates have been rotated 90 degrees for ease of viewing in paper space.
I admit that I have used AutoCAD for several years now, but I have very, very little experience with 3D applications and needing to alter the typical horizontal/vertical coordinate system.
What I have is a file that, though the lower-left icon is horiz/vert, my crosshairs cursor is tilted approximately 30 degrees counterclockwise. This file, I believe, did originate in AutoCAD Civil 3D, so who knows what was done there. But, how can I get my crosshairs straightened out once more?
I have noticed a relation with the UCS and the cursor, when I've played with Orbits. I just can't grasp what that relationship is.
When creating text in model space it appears both mirrored and rotated 90 degrees to the horizontal. However, when I create text in paper space it is fine. I have tried looking at the properties for the text but although I can find a place to rotate the text back to the horizontal it is still mirrored and therefore unreadable.
When I copy paste stuff from one document to another this also occurs.
What are the commands to make a tangent line from one circle 90 degrees to the tangent line of another circle?
View 2 Replies View Relatedgood way to start a line at one of the 45 degree angles of a circle block?
View 9 Replies View RelatedIn gimp, some things are confusing. like the shear/skew tool, isometrics/pixel grids, and selecting objects.
Is there a way to skew a circle for isometric pixel art (30 degrees)? Does gimp have a isometric/pixel grid? (there's a regular grid, but its not isometric)
when selecting an object, is there a way to select it without using float every time? Lastly, is there a way to constrain a line to the 3 most used isometric lines used in isometric pixel art? (shift works, but its hit or miss)
know of a variable which controls how stretching with grips works. I've got a single machine with Autodesk Architecture 2012 that when I select a grip and move it, then type a dimension in the command line, that the line becomes the dimension I typed, not the amount I moved it. For example, If i have 10" line, select and end grip, stretch it +3 inches or -3 inches, the line becomes an absolute of 3 inches. On all other machines, the line would either become 13" or 7".
[URL]
The dynamic input is off.
I have just noticed when attempting to move the attributes in the blocks of my drawing that the grips have disappeared, where they have gone or how to turn them back on?
View 6 Replies View RelatedI use to be able to stretch a line by using the end grip and typing 50 , this would extend the line by 50 units
The problem i now have is that if i do the same thing thing , the line instead of strecting 50 units the line becomes 50 units long in total
is there a system variable that controls this ?
so i select numerous objects and can see their grips. I then go and zoom and/or pan around the place, and the grips disappear!
why is this happening?
Is there a fix?
I have a weird issue with Mleader landing lines.In AutoCAD 2012, I get only one arrow grip on mleader landing lines when I select an mleader (see image below) In AutoCAD 2010 - when I open the same exact drawing - I get TWO arrow grips when I select an mleader.
View 2 Replies View RelatedI am trying to select some portion of my drawing for layer change, but when I panning the view for additional selection, I lost the grips of first selected entities.
View 2 Replies View Relatedwe just upgraded to 2012 and the textmask grips do not show to pick and adjust. they did in 2011 but the only thing when the text is clicked upon there is a gray rectangle without grips in the corners....is the a systen varible to adjust?
View 7 Replies View RelatedI'm having a small problem in AutoCAD 2012. I can't get any grips on any inserted raster image Cpipping Boundary I try to edit. I can select the edge and the line turns into a dashed line, however no grips. The grips work fine on any vector line. Is there a comand to turn on the grips?
View 6 Replies View RelatedI have a plot plan, that is rotate about 31 degrees off true north. So when I draw inside the plan, I rotate the UCS to be able to follow a "plant" north.
> UCS > point 1 > point 2 (along x axis) > point 3 (along y axis)
> PLAN > enter > enter
Now, I'm trying to measure a distance between 2 points with my drawing rotated along a new UCS. However, it keeps giving me the measurements as if it were still in the WORLD UCS.....so my x and y values are weird numbers instead of the nicely rounded numbers to which I have offset from a certain point.
> DIST > point 1 > point 2
How do I get my distance to show me what the x and y distances are in the UCS that I have rotated to, instead of showing me the x and y distances based on the WORLD UCS?
How do I get the export parcel ananlysis to show degrees minutes and seconds instead of the default decimal degreees. My direction settings are set to DMS, but I can't see where to change arc deltas...
(running C3D 2012 sp4, Win7 64bit, 8GB)
I have read many topics that talk about TTF text printing bold under various circumstances, but have not found one addressing my exact issue. I have attached a PDF with which I hope to illustrate my problem.
I have a non-annotative, Scale = 1, all elevations = 0, block; My text is PDF's as text whenever the block is left at 90 or is exploded then rotated. But whenever the blocked is rotated (any amount) the text is no longer interpreted as text, it prints bold.
I need to be able to align my blocks to other, rotated, objects in both model and paper space; so this issue is causing my a fair amount of grief. I have been told switching to a shx font is out of the question.
Someone new needs to use our drawings, and requires DXF. However this end user has requested that our landscape drawings be rotated to portrait for their use.
Without having to alter our entire drawing to accommodate, is there an easier way?
I have a drawing where i am not able to select multiple grips using shift/pick to make the grips "hot". I'm not able to make even one of the grips of a poly line "hot". However, while trying to solve the problem, i've opened another drawing where i AM able to make grips "hot". It doesn't appear to be a system setting issue.
View 6 Replies View RelatedWe have some blocks that have static text labels on the left and numeric attributes on the right. When these blocks are rotated so the text is near vertical the static text has a bold appearance.
If you explode/burst the block then this 'bold' appearance goes away. If you rotate the text to normal then the effect disappears as well. The bold appearance shows up on a plot as well. The effect is subtle at times but noticeable.
Sample drawing attached, see the block near the top of the drawing and a copy of it rotated to normal. Use the BURST command on the block on the left to see the change.
When I rotate my view in drawings containing .sid orthos, the orthos shift. This also happens when I rotate the view in a viewport. I've attached a couple screen caps showing the problem.
View 6 Replies View RelatedI received the attached drawing file "A" from a surveyor that was created in an earlier version of AutoCAD (approx 2000). The attached drawing is rotated so that the view in Model Space shows the cross-hairs with north pointing northwest. There are points included within the drawing that do not match the coordinates of the surveyed points within the attached ascii text file. I would like to rotate the drawing so that the points match the coordinates in the ascii file and North follows the y-axis.
I have imported the points from the ascii text file into a new drawing file "B". I external referenced (overlay) the new drawing file B into drawing A. I tried moving all of the objects in the drawing file A (with MOVE) to a known point coordinate and then rotating (ROTATE) the objects to two known points. I don't know how to select all of the objects in drawing A and not the external reference in drawing B so that I may Rotate only drawing A objects.
How to move and rotate the surveyors drawing A so that I may match the coordinates in the ascii text file.
I have a sketchblock in a sketch that I need to postion into the correct quadrant. I have dimensions on the sketchblock that are told to be driven while running the quadrant position task shown below. see image. Sketchblock is currently in quadrant 1 and I need to be able to push that into the 3rd, thus the (-200,-200).
ThisApplication.ActiveDocument.ComponentDefinition.Sketches(1).SketchBlocks.Item(1).Postion.X = -200
ThisApplication.ActiveDocument.ComponentDefinition.Sketches(1).SketchBlocks.Item(1).Postion.Y = -200
After it is in the correct quadrant I power the dimensions to constraint the sketchblock into correct position.
The question is, how do I position the sketchblock in the correct quadrant via 'position'?
Not working.
I have a macro to create DXF files for all sheet metal parts in an assembly. What I now want to add is 2 functions :-
Move the DXF output to be in the 1st (positive) quadrant so that the left most entity is touches with the Y axis and the bottom most entity touches with the X axis,Add iProperties like Part Number, Material, Thickness and Qty as text to the DXF file.
Any takers?
***********************
HP Z420 Workstation, Windows 7 x64, 64 GB Ram
Intel Xeon E5-1620 @ 3.60 GHz, ATI FirePro V7800 2 GB
3*Dell 2007Fp monitors, SpacePilot
Inventor 2013 PDS Premium & Service Pack 2 with Update 3
Vault Workgroup 2013 with Update 2
I've created a drawing in model space, added text in paper space. When I go to plot the drawing the text is rotated 90 degrees instead of staying oriented the way I added it. There must be some setting that I am missing somewhere!
View 9 Replies View RelatedI have created a dynamic block with a stretch, flip and rotate. Everything works great in its file. When I insert it in another file, the grips move but the block does not change.
AutoCAD 2014
I wonder if it is possible to create a new text style where one can set the text to be already rotated.
I know that it is possible to rotate text in many ways but the styles always seem to be set on the horizontal to begin with.
C3D 2012
Win 7 64 i5
8GB RAM Quadro FX 1800
Why is this happening?
The dwg was fine, then it crashed while changing from modle space to paper space...
When i recovered the dwg, EVERY MTEXT I try to edit becomes rotated vertically and stays that way when i close the edit box...
I do not recall hitting any buttons or making any keystrokes without my knowing...
Is there a way to get my text back to Horizontal and stay that way?
I tried setting the MTEXTFIXED to: 0, 1 & 2.
NONE of these options changed anything.
I NEED to have this fixed. more importantly, i need to know why this is happening sop that i can take steps to prevent this happening in the future...
I am currently working with the latest CAD available.
Im good at freehand drawings on 2d autocad I'm trying to learn 3ds Max. I have a year with inventor, but very fresh on Max. I don't like mechanical, I do floor plans and cartoons.
View 1 Replies View RelatedI am using Inventor 2012 and I am trying to create a circle from a solid drawing I have done, I am creating a 3D drawings of a pessure seal, but I dont know how to go about making this block into a circle with a Diametre of:-
OD 899.8
ID 873.6
(mm)