AutoCAD 2010 :: Variable For Stretching With Grips?
Jun 24, 2011
know of a variable which controls how stretching with grips works. I've got a single machine with Autodesk Architecture 2012 that when I select a grip and move it, then type a dimension in the command line, that the line becomes the dimension I typed, not the amount I moved it. For example, If i have 10" line, select and end grip, stretch it +3 inches or -3 inches, the line becomes an absolute of 3 inches. On all other machines, the line would either become 13" or 7".
I Have a drawing that I want to get laser cut, its not a functional piece it is just going to be something that is hung on the wall.
I first drew the piece in 3D inventor then converted it to a DWG so that i can edit it in Autocad (ive been told by the laser cutter that they can process DWG drawings).
No two lines on the drawing can intersect however as i dont want the laser to remove large chunks from the peice. The problem im having is that i have to go through manually and select each line, then select the end point and then shrink it by a certain value. Since the drawing is quite a large drawing its becoming very time consuming
I cant switch the line types however because no matter what the line type when convereted to NC code the computer sees it as a solid line
ive attached a screen shot to try and explain what i mean
the one on the right is one a section that i have finished modifying and the one on the left is one that i have yet to change
I have just noticed when attempting to move the attributes in the blocks of my drawing that the grips have disappeared, where they have gone or how to turn them back on?
I have a weird issue with Mleader landing lines.In AutoCAD 2012, I get only one arrow grip on mleader landing lines when I select an mleader (see image below) In AutoCAD 2010 - when I open the same exact drawing - I get TWO arrow grips when I select an mleader.
I am trying to select some portion of my drawing for layer change, but when I panning the view for additional selection, I lost the grips of first selected entities.
we just upgraded to 2012 and the textmask grips do not show to pick and adjust. they did in 2011 but the only thing when the text is clicked upon there is a gray rectangle without grips in the corners....is the a systen varible to adjust?
Is it possible to get grip points on a circle at 45-dgree increments rather than at 90-degree increments - that is, at 45, 135, 225 & 315 degrees? (Preferably in addition to the 90-180-270-360 grips, but temporarily instead of would work also)
I'm having a small problem in AutoCAD 2012. I can't get any grips on any inserted raster image Cpipping Boundary I try to edit. I can select the edge and the line turns into a dashed line, however no grips. The grips work fine on any vector line. Is there a comand to turn on the grips?
A line is drawn parellel to the X-axis. What I have been doing all of my career to lengthen this line, by say 3 inches, is select the line, pick the grip I want to lengthen, drag that grip in the general X direction, type the value 3 at the command promt, and hit enter. Voila, done.
Now what AutoCAD is doing, is bringing the grip (yup, ortho is stll on) to exactly where my curser is, totally disregarding the ortho setting AND the value in typing at the comand prompt.
I have a drawing where i am not able to select multiple grips using shift/pick to make the grips "hot". I'm not able to make even one of the grips of a poly line "hot". However, while trying to solve the problem, i've opened another drawing where i AM able to make grips "hot". It doesn't appear to be a system setting issue.
I am finding with certain types of fonts, mostly on architectural title sheets, that they get substituted to romans font.When I go to the Fontalt Setting Variable though and enter a period for no selection and then regen, all the 'missing" font regenerates and looks fine.
My question is why is the font not appearing properly in the first place? I must have the font if it is appearing properly.I don't want to have to reset the fontalt variable everytime I want to plot a drawing!
When I use the measure distance command, I have to exit out of the command before I move on to my next command. I'm used to measuring once and the command automatically exits (in previuos releases). Is there a variable that will exit the command after one measurement?
I just notice that in 2012 the EXPERT system variable set to 1 no longer suppresses the display of the "Objects moved to frozen or turned off layer" pop up.
We are getting ready to deploy 2010 and I am writing a script to set some of the system variables on all the installs. We have some users with 3rd party programs that won't run in 2010 yet so we will have a few people still running 2007 and 2008. I want to set the default File Save As in my script to 2007 format but I can't seem to find a variable to modify this.
In case I wasn't clear this is the setting found in Options, under the Open and Save tab, in the File Save section.
I need to show contour lines that have the elevations embedded in the line. Is there any way to create a line type that will allow me to select and/or change the text to be embedded in the line, without having to define a unique linetype for each elevation?
I am having trouble getting my text height to change user the 'textsize' system variable.
When I input a new height at the command prompt using 'textsize' the text height in the text style dialogue box does not automatically change to match. Also when I use the dtext or mtext command after changing the textsize value, these commands use the value in the text style dialogue box instead.
According to the documentation the FRAME system variable overrides XCLIPFRAME, IMAGEFRAME, etc., has four valid values, 0, 1, 2, or 3, and its initial default value is 3. While editing a drawing, I set FRAME to 0, and then some time later, tried to set it back to 3. AutoCAD refused to accept this value, saying "Requires an integer between 0 and 2." Typing (SETVAR "FRAME" 3) at the command line also failed. The only way I could get it back to 3 was to use UNDO to go back to the default value. Is this a bug?
When I attempt to change my user variable "xyz", a linear restraint, by 4 or more, I get an error message, "A dependent expression cannot be evaluated. The parameter is used in an expression which results in an invalid value for a dimensional constraint." But I can change the value by increments of two many times and exceed the limit of 4, and not get the error message. What is happening and how do I correct this issue?
What is the variable that controls the order in which objects are selected? In other words, I want to be able to always select the last object created by default when objects are overlapping without using object cycling.
I have created a dynamic block with a stretch, flip and rotate. Everything works great in its file. When I insert it in another file, the grips move but the block does not change.
Is there a system variable for holding down shift and picking multiples?
When picking multiples files, to bring in xrefs, I can pick them, but some of the other in the office can not, it want let them pick more then one file at a time.
Is there a command / system variable to set all buttons on every panel in the ribbon to have a button style of "smallwithouttext". I wiould like to do this without having to adjust each button manually
I'm attempting to write a batch script to add some layers to a pre-existing image and save a copy. I've gone through the tutorial, and have run the demo code from Basic_Batch with no errors, but my (what I think of as simple) script throws an "Error: eval: unbound variable: ?" It also seems to cascade the error to other scripts, as I then get "unmatched parentheses: 2" errors from what I assume to be the script immediately following my own during Script-Fu load. This occurs whether running from batch or clicking "Refresh Scripts" from the Script-Fu menu.
What I could find on this forum and Google suggests that I may be required to 'define' one or more of my variables before using it, but for the life of me, I can't figure out which one that would be, and the error (reporting that '?' is undefined!?) I've quintuply (probably more ~_^) checked my parenthesis matching, but they look fine to me.
In case this was an encoding issue, I've tried saving my .scm file as both UTF-8 and ANSI. I should also note that I'm running Windows 7 x64 in English-US.
I'm trying to make a (for lack of a better term) squarish ellipse.
I've tried a few things but they don't work too well, i.e. plines and lofting a rectangle with an ellipse then cutting it two but they just get me arcs that meet at sharp points.
The jpg below is meant to show what I'm trying to do.
I want to take that one quarter of an ellipse at the intersection and stretch/pull it to the midpoint of the line between the corner of the rectangle and the arc. The ellipse is made out of 4 ellipse arcs. I want to stretch just the arc without moving the ends of it at the quadrants.
I am writing a code to select an object (crossing) and to stretch it a certain distance on the y axis. This is the code that I have to select the object, but I cannot find what to use to stretch it. I actually found something to scale it, but it is not what I need. With ThisDrawing.Utility
Dim SP1sel1(0 To 2) As Double Dim SP1sel2(0 To 2) As Double Dim objSS As AcadSelectionSe Set objSS = ThisDrawing.SelectionSets.Add("zzadsaaafatt") ' Select the object [code]....
