AutoCAD 2010 :: MLEADER Arrowhead Size Variable
Mar 7, 2013Is there a system variable that controls the MLEADER arrowhead size?
I want to control it with DIMSCALE variable. How to accomplish this task?
AutoCAD 2012 / Inventor 2012
ADVERTISEMENT
AutoCAD 2010 :: Mleader Vs VPort Color - Arrowhead (DOT) Doesn't Take Vp Color
Oct 29, 2012i did the test with a qleader and everything seem to be functional but mealder have an issue where autodesk have to check this
example: i have a layer called test1 with color green i have a meleader with a Dot as an arrowhead when i go to the viewport and change the vport color to red
well everything changes expt the arrowhead which will take the layer color (green) but if i go to properties and i change the arrow head to closedfilled then it will take the vport color (wierd) i did the test with autocad 2008 to 2012 all the same problem
i did tried with a qleader and it works fine.
Illustrator :: Add Arrowhead Where Size Of Arrowhead (Scale) Applies To Both Start / End Arrowheads
Sep 13, 2012This is for CS4. I want to apply two arrowheads of different sizes to one end and the other end of a line. This is not possible with CS4 under "Add Arrowhead" where the size of the arrowhead (Scale) applies to both the Start and End arrowheads.Illustrator allows to apply several instances of an effect to an object. So I apply one instance of "Add Arrowheads" for the Start end with a given arrowhead Scale (size of arrowhead), and another instance of "Add Arrowheads" for the other End with a different Scale. The second "Add Arrowheads" instance of the effect does not behave at all as expected (it adds two "disfigured" arrowheads even though I ask for one arrowhead only).How can I use two working instances of "Add Arrowheads" to reach my goal?
View 5 Replies View RelatedAutoCAD 2010 :: Mleader Block Text Size
Oct 1, 2012In Autocad 2011, Mleader, is there a way to set the block size and the text size with the source block (square, cercle etc.. I would like to make it a specific size instead of measuring then scaling.
View 2 Replies View RelatedAutoCad :: Change Leader Arrowhead Size Without Changing Dimension Arrow / Tick Size?
Mar 24, 2009Is there a way to change the leader arrowhead size without changing the dimension arrow/tick size?
View 9 Replies View RelatedAutoCAD 2010 :: Creates Arch Leader With Arrowhead On The End?
Feb 1, 2012I have a lisp program that creates a arch leader with a arrowhead on the end. All of a sudden the arrowhead does not appear on the end of the leader but out on space. Not sure what this is happening.
View 1 Replies View RelatedAutoCAD 2010 :: Customize Linetype With Arrowhead At Beginning And End
Jan 8, 2013I am trying to custom a new linetpye as below, with an arrowhead at the beginning and at the end but point to opposite direction. This is easy to build such linetype in Microstation, but I am new in autocad.
View 1 Replies View RelatedAutoCAD 2010 :: Way To Put Mleader Into LISP Routine
Aug 16, 2012I put mleader into a LISP routine and it is doing the text attached to it only in the command line instead of in the drawing is ther a way to put mleader into a LISP routine and have it do the same as when you just type in mleader?
View 2 Replies View RelatedAutoCAD 2010 :: Set Mleader Background Mask?
May 4, 2010I am trying to use a lisp that will turn on a background mask on selected mleaders. I found the attached lisp here [URL]. it works good except the mask border offset factor is set to 1.5. I need the offset to be 1.0. When I look thru the lisp code it says the default is 1.0 but can be changed.
how I can use the lisp and get mask offset factor to be 1.0?
C3D 2010
3G RAM
XP PRO, SP2
AutoCAD 2010 :: Mleader That Displays Xref Name
Jan 26, 2012Is there a way to set up a multileader on my tool pallet to automatically pull an xref name when user selects it?
user selects multileader
user selects point on xref
user selects landing location
xref name is inserted as a field
trying to save a few clicks over inserting field
AutoCAD 2010 :: MLeader Landing Grips
Apr 23, 2013I have a weird issue with Mleader landing lines.In AutoCAD 2012, I get only one arrow grip on mleader landing lines when I select an mleader (see image below) In AutoCAD 2010 - when I open the same exact drawing - I get TWO arrow grips when I select an mleader.
View 2 Replies View RelatedAutoCAD 2010 :: Extending MLeader Landings
Feb 1, 2012I have had an issue with AutoCAD 2012 that I cannot fix. AutoCAD 2010 did not do this.
Here is the problem: I start by directing your attention to the attached file "LEADER PROB1". As you can see, i have two MLEADER notations. one ("TOP LINE") is above the other ("MIDDLE LINE"). The left side of the text in both mleader notations align and the leader jets out from the left side as well. However, each leader has a different angle at the corner of the leader landing. If I wanted to make the "MIDDLE LINE" leader angel to match the "TOP LINE" Leader angle, i used to move nod where the landing bends and continues on to the leader (circled in red in my attached image).
However, when i move this node, I end up with the angles matching, BUT now the text is not aligned, see attached image "LEADER PROB2".
How can i fix this? Quick Leaders ("QLEADER") works just fine (in regards to landing extensions) but not MLEADERS. I would like to extend the mleader landing but keep the text where it is, I don't want the text portion to move.
AutoCAD 2010 :: Changing MTEXT To MLEADER
Oct 18, 2012How to change MTEXT to MLEADER? We often have texts on our drawing - mostly MTEXT and used line to the text.
Recently I started using MLEADER due to that it has added line to the text and looked more professional with consistent line setting out within the text.
The problem is that I don't seem to find a way of converting MTEXT to MLEADER. From the internet search, it seems that adding a LISP created by someone seems to do trick but I would prefer to do from the Autocad software so that all colleagues can use.
AutoCAD Visual LISP / AutoLISP :: Mleader Style - Arrow Head Size Setting
Nov 17, 2009I have some working code that sets the Text Style name to ROMANS inside my Mleader Style called ARROW. Here it is:
(setq dict (dictsearch (namedobjdict) "ACAD_MLEADERSTYLE") ; start setq q
dict1 (member (cons 3 "Arrow") dict) ; code 3 is Mleader Style Description
el1 (entget (cdr (assoc 350 dict1))) ; code 350 is dictionary entity handle
er (tblobjname "style" "Romans") ; new value for MLEADER Text Style
) ; end set
(entmod (subst (cons 342 er) (assoc 342 el1) el1)) ; code 342 is MmTextStyleId - write new vale to mTextStyleId
I want to modify this code so that it sets the Arrow Head Size to a specific value, say 0.125. Having a tough time figuring out the DXF codes and tblobjname to do this.
AutoCAD 2010 :: MLeader Text Moves Insertion Point After Editing?
Nov 28, 2011AutoCad 2012 SP1 / Windows 7 64 bit
Sometimes I have MLeader text without Mleaders (ie, I remove the leader arm using MLEADEREDIT). Then when I go to edit this 'floating note', the base point moves:
In this screenshot, I've just finished editing the text. Note that I added in the diagonal line at the current insertion point of the Mleader text (top right):
Then, after I click outside the Mleader box, the text moves:
THis happens only with right-aligned MLeaders, and keeps happening, ie if I edit this text again and close it again, it will move again.
AutoCad 2D :: When Change Scale On Object Property Mleader Arrow Head Didn't Change Size
Oct 17, 2013Mleader arrow head didn't change size when change the scale on Object property?
The Arrow head size didn't change corresponding to the scale, i included the pic below, the top picture, the arrow head was set at .18" but was really small when i plot out, so i wanted to make it bigger, when i changed to .50" or .75" or even 1" the arrow head became even smaller than .18". Only when .18" than the arrow side is legible
Mleader.jpg
AutoCAD .NET :: Paper Size With Variable Length
Aug 1, 2012I'm trying to plot in pdf many dwg file.
The files have a fixed height but variable in length.
The length of the file I'll take the "scroll".
So i want to create a paper size with a specific dimension.
psv.SetPlotConfigurationName(ps, "DWG To PDF.pc3", "Name of the paper");
How can I do?
AutoCad :: Variable Text And Block Size For Different Scale Sizes
May 15, 2012Is there a way to have VARIABLE text size AND BLOCK SIZE autocad 2012, for different scales sizes? To sum it up I am running 1/8th scale on some of the pages in the set with a 1/4 blow up section. I use addressable devices so it is a lot of work to change all the text Is there anything that will auto-update the text size per scale with out having to go through my drawing and repeat all the text and VPfreeze it?
View 9 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Dimstyle Break Size Variable?
Aug 28, 2009I want to set the break size in all of my dimstyles but I can't find a system variable for it. know what it is or how else to set it?
View 2 Replies View RelatedAutoCAD 2010 :: Variable For Stretching With Grips?
Jun 24, 2011know of a variable which controls how stretching with grips works. I've got a single machine with Autodesk Architecture 2012 that when I select a grip and move it, then type a dimension in the command line, that the line becomes the dimension I typed, not the amount I moved it. For example, If i have 10" line, select and end grip, stretch it +3 inches or -3 inches, the line becomes an absolute of 3 inches. On all other machines, the line would either become 13" or 7".
[URL]
The dynamic input is off.
AutoCAD 2010 :: FONTALT System Variable
Sep 13, 2013I am finding with certain types of fonts, mostly on architectural title sheets, that they get substituted to romans font.When I go to the Fontalt Setting Variable though and enter a period for no selection and then regen, all the 'missing" font regenerates and looks fine.
My question is why is the font not appearing properly in the first place? I must have the font if it is appearing properly.I don't want to have to reset the fontalt variable everytime I want to plot a drawing!
AutoCAD 2010 :: Measure Distance Variable?
Oct 15, 2012When I use the measure distance command, I have to exit out of the command before I move on to my next command. I'm used to measuring once and the command automatically exits (in previuos releases). Is there a variable that will exit the command after one measurement?
View 4 Replies View RelatedAutoCAD 2010 :: Which Variable Contains The Scale Of Drawing
Jun 21, 2012At work I am using AutoOrtho (part of procad suite)
tell me which variable contains the scale of drawing?
AutoCAD 2010 :: Expert System Variable
Jul 27, 2011I just notice that in 2012 the EXPERT system variable set to 1 no longer suppresses the display of the "Objects moved to frozen or turned off layer" pop up.
View 6 Replies View RelatedAutoCAD 2010 :: Unable To Set Value For System Variable INSNAME
Feb 28, 2012We are unable to set the value for system variable "INSNAME" .
It is returning nothing after assigning values for this variable.
We are using below statement for setting the value.
Application.SetSystemVariable("INSNAME ", "test.dwg");
(We are working in AutoCAD 2010. using programming language as .net 3.5).
AutoCAD 2010 :: File Save As Default Variable
Sep 21, 2009We are getting ready to deploy 2010 and I am writing a script to set some of the system variables on all the installs.
We have some users with 3rd party programs that won't run in 2010 yet so we will have a few people still running 2007 and 2008. I want to set the default File Save As in my script to 2007 format but I can't seem to find a variable to modify this.
In case I wasn't clear this is the setting found in Options, under the Open and Save tab, in the File Save section.
AutoCAD 2010 :: Line Types With Variable Text?
May 15, 2012I need to show contour lines that have the elevations embedded in the line. Is there any way to create a line type that will allow me to select and/or change the text to be embedded in the line, without having to define a unique linetype for each elevation?
View 2 Replies View RelatedAutoCAD 2010 :: Text Height System Variable?
Jun 19, 2012I am having trouble getting my text height to change user the 'textsize' system variable.
When I input a new height at the command prompt using 'textsize' the text height in the text style dialogue box does not automatically change to match. Also when I use the dtext or mtext command after changing the textsize value, these commands use the value in the text style dialogue box instead.
AutoCAD 2010 :: Cannot Reset FRAME System Variable To 3
Jan 24, 2013According to the documentation the FRAME system variable overrides XCLIPFRAME, IMAGEFRAME, etc., has four valid values, 0, 1, 2, or 3, and its initial default value is 3. While editing a drawing, I set FRAME to 0, and then some time later, tried to set it back to 3. AutoCAD refused to accept this value, saying "Requires an integer between 0 and 2." Typing (SETVAR "FRAME" 3) at the command line also failed. The only way I could get it back to 3 was to use UNDO to go back to the default value. Is this a bug?
View 3 Replies View RelatedAutoCAD 2010 :: Parametric User Variable Value Cannot Be Changed By More Than 2
Dec 29, 2011When I attempt to change my user variable "xyz", a linear restraint, by 4 or more, I get an error message, "A dependent expression cannot be evaluated. The parameter is used in an expression which results in an invalid value for a dimensional constraint." But I can change the value by increments of two many times and exceed the limit of 4, and not get the error message. What is happening and how do I correct this issue?
View 7 Replies View RelatedAutoCAD 2010 :: Variable That Controls Order In Which Objects Are Selected?
Feb 22, 2012What is the variable that controls the order in which objects are selected? In other words, I want to be able to always select the last object created by default when objects are overlapping without using object cycling.
View 5 Replies View Related
