AutoCAD 2010 :: Grips Disappearing After Zoom
Sep 18, 2012so i select numerous objects and can see their grips. I then go and zoom and/or pan around the place, and the grips disappear!
why is this happening?
Is there a fix?
ADVERTISEMENT
AutoCAD 2010 :: Intersection Osnap Appears On Zoom Out But Disappears When Zoom In
Feb 22, 2012The AutoCAD doesn’t show the “intersect osnap” at certain zoom!
The “intersection osnap” between a “hatched rectangle” and a “DASHDOT2” line appears and disappears depending on the amount of zoom!
As I zoom out the “intersection osnap” appears but when I zoom in, it disappears
Why the "intersection Osnap" should disappear as I zoom in?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
AutoCAD 2010 :: Middle Mouse Button (wheel) Set To Zoom All / Zoom Extents Double Click
Feb 27, 2013I am working on getting some settings done, moving from 2008 to 2012. How do you set the Middle Mouse Button (wheel) to either Zoom All or Zoom Extents when you double click it? I thought it was set in the Main CUI file.
View 9 Replies View RelatedPhotoshop :: Image Disappearing Every Time On Using Zoom Tool?
Mar 29, 2012when i bring a image in and use zoom tool i lose pic and have to zoom a few more times to get image back is their away to keep the image from disappearing every time u use the zoom tool?
View 1 Replies View RelatedAutoCAD 2010 :: Variable For Stretching With Grips?
Jun 24, 2011know of a variable which controls how stretching with grips works. I've got a single machine with Autodesk Architecture 2012 that when I select a grip and move it, then type a dimension in the command line, that the line becomes the dimension I typed, not the amount I moved it. For example, If i have 10" line, select and end grip, stretch it +3 inches or -3 inches, the line becomes an absolute of 3 inches. On all other machines, the line would either become 13" or 7".
[URL]
The dynamic input is off.
AutoCAD 2010 :: Missing Attribute Grips
Jul 14, 2011I have just noticed when attempting to move the attributes in the blocks of my drawing that the grips have disappeared, where they have gone or how to turn them back on?
View 6 Replies View RelatedAutoCAD 2010 :: Stretching A Line With Grips
Feb 25, 2012I use to be able to stretch a line by using the end grip and typing 50 , this would extend the line by 50 units
The problem i now have is that if i do the same thing thing , the line instead of strecting 50 units the line becomes 50 units long in total
is there a system variable that controls this ?
AutoCAD 2010 :: MLeader Landing Grips
Apr 23, 2013I have a weird issue with Mleader landing lines.In AutoCAD 2012, I get only one arrow grip on mleader landing lines when I select an mleader (see image below) In AutoCAD 2010 - when I open the same exact drawing - I get TWO arrow grips when I select an mleader.
View 2 Replies View RelatedAutoCAD 2010 :: Grips Can't Stay On When Panning Object
Apr 19, 2012I am trying to select some portion of my drawing for layer change, but when I panning the view for additional selection, I lost the grips of first selected entities.
View 2 Replies View RelatedAutoCAD 2010 :: Textmask Grips Do Not Show In R2012?
Jul 29, 2011we just upgraded to 2012 and the textmask grips do not show to pick and adjust. they did in 2011 but the only thing when the text is clicked upon there is a gray rectangle without grips in the corners....is the a systen varible to adjust?
View 7 Replies View RelatedAutoCAD 2010 :: Circle Quadrant Grips Rotated 45 Degrees?
May 31, 2012Is it possible to get grip points on a circle at 45-dgree increments rather than at 90-degree increments - that is, at 45, 135, 225 & 315 degrees? (Preferably in addition to the 90-180-270-360 grips, but temporarily instead of would work also)
View 9 Replies View RelatedAutoCAD 2010 :: Raster Image Cpipping Boundary No Grips
Aug 4, 2011I'm having a small problem in AutoCAD 2012. I can't get any grips on any inserted raster image Cpipping Boundary I try to edit. I can select the edge and the line turns into a dashed line, however no grips. The grips work fine on any vector line. Is there a comand to turn on the grips?
View 6 Replies View RelatedAutoCAD 2010 :: Unable To Select Multiple Grips Using Shift / Pick In Drawing
Mar 29, 2012I have a drawing where i am not able to select multiple grips using shift/pick to make the grips "hot". I'm not able to make even one of the grips of a poly line "hot". However, while trying to solve the problem, i've opened another drawing where i AM able to make grips "hot". It doesn't appear to be a system setting issue.
View 6 Replies View RelatedAutoCAD 2010 :: Disappearing Paperspace Icons
Jun 5, 2013I just installed the 2011 update (recomended). Now, on restart, all my butto icons are gone! The buttons are still active but I can't see them. They highlight when I roll over but the icon doesn't show up.
What can I do???
See att for printscreen
AutoCAD 2010 :: Reference Dimension Disappearing?
Oct 20, 2013After creating a parametricly dimensioned, fully constrained, 2D drawing I wanted to add a couple of annotative reference dimensions to two different curves. I first select the parametric radius dimension (default is annotative). Next I click on the curve, then click the desired location. The dimension shows up, highlighted for editing. I press enter. Now the over-constrained window pops up giving me two options: Create a Reference Dimension or Reselect the Object. I choose Reference Dimension. The dimension immediately disappears. No error shows in the command bar. Attached is the file. It is the two large radii along the bottom (or top, its symmetric) that I am trying to give reference dimensions.
View 1 Replies View RelatedAutoCAD 2010 :: VPorts - Modelspace Disappearing
Jun 28, 2011I'm having a little problem with the modelspace in a vport disappearing on me.
I am trying to do some B.O.M. work, and sometimes I can't snap to a particular point/object, so I turn osnap off and zoom in to identify the correct object. After a certain point in the zoom the drawing regens and then the modelspace disappears completely.
I tried a regenall, closing the drawing and starting it up again, but it's still not there. I checked the properties and it still says it's a vport. When I double click it to enter modelspace from the vport it doesn't take me into modelspace.
I've checked my maxactvp, that's maxed out at 64. I've run an audit and that didn't work.
AutoCAD Civil 3D 2011 32-bit
Win XP Pro SP3
Dual Core, 4 GB of RAM
NVIDIA Quadro FX3700
AutoCAD 2010 :: Disappearing 3DClip Clipping Planes?
Dec 17, 2010This is one of those AutoCAD sneaky buggers that ended up killing a large portion of my day so I thought it worth sharing.
We do a lot of things to get the best performance with 3D models. I generate Oil and Gas processing plant models using CADWorx Plant Professional in AutoCAD. For the size of our projects, speed we have to work at, and drawing setup concurrent with model completion no other setup has been as effective as 3Dclip.
The problem I run into with 3DClip is that once my 3D model reaches a certain size I loose the visualization of my clipping boundaries. I can watch my viewport change as move the clipping plane but don't see a handy dandy line to show where exactly it is clipping.
Here's the fix I found. Options - System - Performance Settings - deselect wireframe display in the Degradation order section. Now if I could just get my front clipping plane to show up white, blue, yellow, or any color other than black given my black background!
AutoCAD 2010 :: Items From Tool Palette Disappearing?
May 15, 2012I have a section cut that I use from my tool palette that disappears from paperspace. It shows up in model space and everything else I use from my tool palette shows in both model and paperspace. I have all layers on, unfrozen, etc. They are not on my defpoints layer either. It just seems to be that particular block that is disappearing. Its the strangest thing. One day it worked just fine and the next it started doing this.
View 5 Replies View RelatedAutoCAD 2010 :: Layer Disappearing When Opening Drawing?
Sep 21, 2012I had an issue using 3D 2010. In my drawing I had a layer for my windows. My windows were nicely put together and design on the window layer. Next thing that happens I turn on my drawing today to come and find my windows are now saved on my viewport layer and the viewport layer took the properties of my window layer. Now last night when I plotted out the drawing I made viewports on a layer for viewports and that was the last layer I had used so it was current. What I want to know is why the hell did the layer dominate my window layer with taking the properties of my window layer. I did not merge them!
View 3 Replies View RelatedAutoCAD 2010 :: Blocks Disappearing When Dragged From Tool Palette
Oct 17, 2011I have a problem in Autocad2011model space when I drag blocks from the tool palette they disappear. The block initially appears when I grab it and drag it across the model space. Then when I go to insert it in position on the drawing as per normal it then vanishes. If I insert the same blocks using the 'insert block' method the blocks insert normally.
View 6 Replies View RelatedAutoCAD 2010 :: Autodesk - Layerstates Of Xrefs In Drawings Disappearing
Apr 11, 2011Installed AutoCAD 2012 3 days ago.
I have noticed the layerstates of the xrefs in my drawings are disappearing. I have to close and reopen the file for them to reappear. Can duplicate this error? At the moment i haven't been able to pinpoint when it happens, but its a first in my experience. I just installed it on another staff members computer so i will see if they get the same problem and report back.
OK. I discovered it occurs when you unload the xrefs, then reload them in the drawing. I was able to duplicate the same problem in a seperate drawing on another computer.
AutoCAD 2010 :: Dynamic Block Grips - Block Does Not Change When Insert In Another File
Oct 28, 2013I have created a dynamic block with a stretch, flip and rotate. Everything works great in its file. When I insert it in another file, the grips move but the block does not change.
AutoCAD 2014
AutoCAD 2010 :: Hatch Creating Error In DWG File - Lines Disappearing
Nov 8, 2012We are using a file created by another company and making additions to it for Interiors. While working in this file we have added some new layers and have begun to hatch new walls. While hatching some of these wall my boss received a message saying that the file had errors. He saved and closed the file at that point. When he re-opened the file a number of lines were missing from the file.
They appear to be completely random - i.e. parts of chairs are missing but not the whole chair, parts of walls but not whole walls. The things missing were not all on the same layer and were not necessarily items that had been hatched.
Note - we are running 2012 and the files were created in 2007
AutoCAD 2010 :: Undo Without Zoom Or Pan
Aug 22, 2011Is it possible to use undo in AutoCAD without zoom & pan?
View 9 Replies View RelatedAutoCAD 2010 :: Combine Zoom And Pan Commands
May 2, 2011It seems that the 'combine zoom and pan commands' option doesn't work correctly. Let's say it doesn't react as i am used to in previous version. now i have to do the undo command or 'ctrl z' many times before i am back at the point where i want to go. I using the middle mouse button often to zoom in and out, and for panning. but now there are a lot of steps to undo if you want to go back.
I tried to switch of and on this option in the options dialog but no difference.
AutoCAD 2010 :: Zoom To Scale Not Working?
Mar 8, 2013when i am i the viewports and use the "scl" shortcut click zoom to scale nothing will happen i can zoom use anno. in the lower right corner or propties.
is there a buttom or a prompt that needs to be fixed.
AutoCAD 2010 :: Adjust Settings In Pan / Zoom And Orbit
Apr 19, 2011Is there a way to adjust the settings in pan, zoom, and orbit. I've been using these commands with my mouse button and wheel. These 3 commands are not behaving properly. Whenever I make a small scroll on my mouse, the view port zooms all the way until I cannot see anything, which is very unlikely. The same goes when I use Orbit, a small movement/click in my mouse, makes a very big difference in a view port.
But everything goes well whenever I start new drawing.
AutoCAD 2010 :: With The Zoom The Fill Patterns Disappear
Sep 7, 2012I have a problem with the zoom and fill patterns in two PCs with Autocad 2012 In both, very often, when I zoom in on the design the fill patterns disappear.
After an update of the image reappear and this is a very big problem for me. The two PCs are both intel I7, one use a nVidia Geforce and other an nVidia Quadro, and I tried different driver versions but without benefits.
AutoCAD 2010 :: Why Don’t Have Command Zoom To Layer
Feb 12, 2012Why we don’t have the command “zoom to layer” in the AutoCAD?
In particular cases, we need to zoom to certain layer. Is this possible in the AutoCAD? In the ArcGIS we do have this tool.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
AutoCAD 2010 :: Transparent Zoom Extents Not Working
Jan 30, 2012I get an error about transparent zoom not working because it requires a regen. I do not want to turn the autoregen off.
View 1 Replies View RelatedAutoCAD 2010 :: Regen And Zoom Command Causes To Crash?
May 23, 2012This happens with a number of drawings, I believe all the files are very large approximately 8mb+. The issue is that by using the REGEN or the Zoom - Dynamic command, it will freeze AutoCAD. I will have to conduct a force shutdown than restart the program.
My question is; where do I start to determine what is the cause? Where do I find an error log?