AutoCAD 2010 :: Reference Dimension Disappearing?
Oct 20, 2013
After creating a parametricly dimensioned, fully constrained, 2D drawing I wanted to add a couple of annotative reference dimensions to two different curves. I first select the parametric radius dimension (default is annotative). Next I click on the curve, then click the desired location. The dimension shows up, highlighted for editing. I press enter. Now the over-constrained window pops up giving me two options: Create a Reference Dimension or Reselect the Object. I choose Reference Dimension. The dimension immediately disappears. No error shows in the command bar. Attached is the file. It is the two large radii along the bottom (or top, its symmetric) that I am trying to give reference dimensions.
View 1 Replies
ADVERTISEMENT
May 17, 2012
I have a problem with Inventor 2013. The dimension lines have disappeared. I've been through all the dimension styles and layers to make sure I hadn't turned one off
All other drawings are fine and if I create another even using the same model it works just fine but I'd rather find out why than re-do the whole drawing.
View 8 Replies
View Related
Nov 15, 2012
In AutoCAD 2013, when I try to select a dimension object for moving, erasing, &c, the text disappears. How to get it to stay displayed? Seems to just be when using AutoCAD 2013.
View 6 Replies
View Related
Mar 13, 2012
I'm trying to delete, programatically, a specific dimensions on a specific sheet of my drawing based on a model parameter. I imagine it would be pretty straightforward to refer to generaldimensions.item(?).delete but how do I know what the index number of the dimension I want is? The only samples I can find either generacially access item(1) or use a for each loop to get all dimensions.
View 3 Replies
View Related
Feb 14, 2012
Is there a way to find out where reference dimensions originate? I have a reference dimension I would like to change, but don't know where to do go to make that happen.
View 1 Replies
View Related
Jul 27, 2006
I've come across this many times now. When in an assembly, I create a sketch. I then try to project geometry and I will sometimes get this error:
"Cannot constrain or dimension reference or fixed geometry."
why I can't project edges/faces/points of certain parts?
View 9 Replies
View Related
Jul 30, 2012
Is there anyway to add a driven dimension or reference dimension as a column chooser? What I am really trying to accomplish is to show the metric and english dimension in my general table for my ipart. I model itself is dimensioned in metric. I now would like to add the english dimension next to the metric one.
View 6 Replies
View Related
Sep 2, 2009
I am having trouble with Iparts getting a red cross due to dimensions and constraints to unresolved reference geometry. If, for example, I have Hole 2 dimensioned from Hole 1 in one member and in another member I suppress Hole 1 and Hole 2 I get an error stating (correctly) that the sketch for Hole 2 has a "Dimension to unresolved reference geometry". I understand why I should get this error if Hole 2 was unsuppressed and Hole 1 was suppressed but why do I get this error when they are both suppressed.
If I get this error on a member that has these two holes suppressed and I switch back to a member that has them both active the error dissapears. I guess in the end this is a question for Autodesk. Can you set up Iparts so that when a feature is suppressed Inventor completely ignores it instead of still trying to resolve it. This functionality is a major headache for us because we don't want to leave models with the Red Cross on but if we want to dimension our features appropriately (ie referencing other, related features) we have to leave a model with errors in it.
See attached part. If you switch within the first 2 members there are no errors, if you move into the last 2 members you will see the cross highlight.
View 4 Replies
View Related
May 11, 2011
For some strange reason I can not print and dimension lines with an angle reference. I get the error "Cannot find or create the font AerialMT".
However, I have this font on my machine. Triple checked and installed it again.
View 8 Replies
View Related
Jan 14, 2013
I have a VB program that auto updates the size of a door and frame assembly, and in turn, updates the shop drawings to reflect this change. I have a view on my shop drawing that I have drawn a sketch in. I start the sketch, add my dimensions, and I use 'Project Geometry' to project the edges of the actual part around the sketch to constrain my sketch and keep it in place. The problem is, as the program runs, and the door/frame changes height, the sketch loses it's dimensional references to the projected geometry. When I go back and reopen the drawing after running the program, all the dimensions that went to the projected geometry are gone.
Is there another way to anchor a sketch to a drawing view part instead of dimensioning to projected geometries? This doesn't seem to be working, and I've tried it every which way I can think of. Oddly enough, I have another sketch in a different view that is set up the same way, and it never misses a beat.
View 4 Replies
View Related
Oct 30, 2013
When I add a wall or door the reference dimensions default to the center of the wall or door, etc. Is there any way to have these reference dimensions default to the structural face of a wall instead of continually dragging with everything I draw?
View 2 Replies
View Related
Sep 18, 2012
so i select numerous objects and can see their grips. I then go and zoom and/or pan around the place, and the grips disappear!
why is this happening?
Is there a fix?
View 1 Replies
View Related
Jun 5, 2013
I just installed the 2011 update (recomended). Now, on restart, all my butto icons are gone! The buttons are still active but I can't see them. They highlight when I roll over but the icon doesn't show up.
What can I do???
See att for printscreen
View 3 Replies
View Related
Jun 28, 2011
I'm having a little problem with the modelspace in a vport disappearing on me.
I am trying to do some B.O.M. work, and sometimes I can't snap to a particular point/object, so I turn osnap off and zoom in to identify the correct object. After a certain point in the zoom the drawing regens and then the modelspace disappears completely.
I tried a regenall, closing the drawing and starting it up again, but it's still not there. I checked the properties and it still says it's a vport. When I double click it to enter modelspace from the vport it doesn't take me into modelspace.
I've checked my maxactvp, that's maxed out at 64. I've run an audit and that didn't work.
AutoCAD Civil 3D 2011 32-bit
Win XP Pro SP3
Dual Core, 4 GB of RAM
NVIDIA Quadro FX3700
View 6 Replies
View Related
Dec 17, 2010
This is one of those AutoCAD sneaky buggers that ended up killing a large portion of my day so I thought it worth sharing.
We do a lot of things to get the best performance with 3D models. I generate Oil and Gas processing plant models using CADWorx Plant Professional in AutoCAD. For the size of our projects, speed we have to work at, and drawing setup concurrent with model completion no other setup has been as effective as 3Dclip.
The problem I run into with 3DClip is that once my 3D model reaches a certain size I loose the visualization of my clipping boundaries. I can watch my viewport change as move the clipping plane but don't see a handy dandy line to show where exactly it is clipping.
Here's the fix I found. Options - System - Performance Settings - deselect wireframe display in the Degradation order section. Now if I could just get my front clipping plane to show up white, blue, yellow, or any color other than black given my black background!
View 3 Replies
View Related
May 15, 2012
I have a section cut that I use from my tool palette that disappears from paperspace. It shows up in model space and everything else I use from my tool palette shows in both model and paperspace. I have all layers on, unfrozen, etc. They are not on my defpoints layer either. It just seems to be that particular block that is disappearing. Its the strangest thing. One day it worked just fine and the next it started doing this.
View 5 Replies
View Related
Sep 21, 2012
I had an issue using 3D 2010. In my drawing I had a layer for my windows. My windows were nicely put together and design on the window layer. Next thing that happens I turn on my drawing today to come and find my windows are now saved on my viewport layer and the viewport layer took the properties of my window layer. Now last night when I plotted out the drawing I made viewports on a layer for viewports and that was the last layer I had used so it was current. What I want to know is why the hell did the layer dominate my window layer with taking the properties of my window layer. I did not merge them!
View 3 Replies
View Related
Oct 17, 2011
I have a problem in Autocad2011model space when I drag blocks from the tool palette they disappear. The block initially appears when I grab it and drag it across the model space. Then when I go to insert it in position on the drawing as per normal it then vanishes. If I insert the same blocks using the 'insert block' method the blocks insert normally.
View 6 Replies
View Related
Apr 11, 2011
Installed AutoCAD 2012 3 days ago.
I have noticed the layerstates of the xrefs in my drawings are disappearing. I have to close and reopen the file for them to reappear. Can duplicate this error? At the moment i haven't been able to pinpoint when it happens, but its a first in my experience. I just installed it on another staff members computer so i will see if they get the same problem and report back.
OK. I discovered it occurs when you unload the xrefs, then reload them in the drawing. I was able to duplicate the same problem in a seperate drawing on another computer.
View 5 Replies
View Related
Nov 8, 2012
We are using a file created by another company and making additions to it for Interiors. While working in this file we have added some new layers and have begun to hatch new walls. While hatching some of these wall my boss received a message saying that the file had errors. He saved and closed the file at that point. When he re-opened the file a number of lines were missing from the file.
They appear to be completely random - i.e. parts of chairs are missing but not the whole chair, parts of walls but not whole walls. The things missing were not all on the same layer and were not necessarily items that had been hatched.
Note - we are running 2012 and the files were created in 2007
View 1 Replies
View Related
May 3, 2012
Noticed that the multiple copy option has been removed from the rotate command? It used to be that I could choose the copy option in the rotate command and set a reference angle to create multiple copies of an object based on a rotational axis. Now the command will let you copy based on a reference angle, but only once. Is there a system variable I can set to bring this option back?
View 1 Replies
View Related
Mar 8, 2012
We have AutoCAD 2010 installed on 5 machines in our office. These machines work and save files to our server. One of the workstations always gets a pop up that it is missing reference files. No other workstations are running into this issue. We've tried having multiple users log into this specific computer but they all encounter the same error.
Another thing (which may be related to this error) the drawings that do open up on this computer don't line up. For instance we have a field in the lower right hand corner wiith text such as job name/number, tech who worked on the drawing etc. One all other computers this information lines up perfectly but on this one it doesn't as well os other lines on this machine don't line up properly.
View 2 Replies
View Related
Dec 28, 2013
I wonder if the RM can be used in reverse, i.e. to find which drawings reference a certain file.
Or is there another tool for this?
View 9 Replies
View Related
Jul 10, 2013
I wanted to create a reference axis, which should look like the one in the following picture (B):
how I can create such an reference axis? Is there a tool for it or is it usually created manually?
View 5 Replies
View Related
Dec 19, 2012
I have the AutoCad Map 2009 (32bit) with Windows XP on one Computer and uploaded AutoCad LT 2011 (64bit) in Windows 7 (64bit) on a second Computer. The Files could not be migrated (not the same Program and Operating systems) In Release 11 all my Reference File colors are now faded in Model and Paper Space. What do I have to change so that it looks like in Map 2009?
View 2 Replies
View Related
Oct 2, 2012
I have a drawing that does not save the xref layer setting. I can change colors and thaw different layers but after saving and closing the drawing it reverts back to the original when opened again. I am sure this is a setting but can not find which setting.
View 2 Replies
View Related
Mar 5, 2013
whenever I click to attach a drawing reference nothing happens. I don't get the browse to file window.
I've tried using the GUI from the View menu / Palettes panel/external palette, Also from the command prompt by typing external references and attach still no joy.
I have all SPs installed. I tried exporting another user's profile and importing it to my CAD. Do I have to reinstall the software from scratch?
View 4 Replies
View Related
Jul 29, 2011
I'm using Architecture 2011, but the problem is pretty generic.
I am working with a very complex vendor drawing and using it as an xref to my working drawing. I need to be able to freeze parts of the xref and change colors (for plotting purposes) of other parts. Under ideal circumstance this would require simple layer manipulation.
My problem is that a large percentage of the vendor drawing is made up of blocks. There are nearly 1000 different blocks. Most of these blocks were created using layers other than 0 - quite often more than one layer is used. Sometimes the block is inserted on a layer that was used in it's creation, sometimes not. The only way I can omit one of these blocks from my drawing is to figure out what layer was used in it's creation and freeze that layer. You can see how this could be a pretty tedious process.
My limited CAD knowledge only gives me: edit all 1000 blocks, changing them to layer 0
View 8 Replies
View Related
Apr 10, 2013
Want to break/cut a line which is in reference file.
I know MicroStation has this function called "mask". Does AutoCAD has similar?
View 9 Replies
View Related
Dec 4, 2012
When I start Reference Manager, the program window opens but at the same moment a message window opens saying 'AutoCAD component has stopped working Windows is checking for a solution to the problem...'. A solution is not found, so I can only select 'Close program', and the program closes. I have run Reference Manager successfully a few weeks ago, and after that I haven't installed or removed Autodesk programs. I have Windows 7 64-bit, AutoCAD Mechanical 2012 SP2 and Factory Design Suite Ultimate 2013. I cannot use Reference Manager 2013 (which works) because it saves the files in 2013 format.
In Windows Control Panel / Troubleshooting I found a file with the following text:
Description
Faulting Application Path: C:Program FilesAutodeskAutoCAD Mechanical 2012AdRefMan.exe
Problem signature
Problem Event Name: APPCRASH
Application Name: AdRefMan.exe
Application Version: 18.2.51.0
Application Timestamp: 4d4b63d1
Fault Module Name: AdRefMan.exe
Fault Module Version: 18.2.51.0
Fault Module Timestamp: 4d4b63d1
Exception c0000005
Exception Offset: 000000000003dc71
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1035
Additional Information 1: 9416
Additional Information 2: 9416e8b8865dfbe86f7b5b96c4331260
Additional Information 3: c86b
Additional Information 4: c86b8562f11a561a601a7649b1d675a3
View 3 Replies
View Related
Jan 16, 2013
I had a DXF file with an external reference file inside, when showing in AutoCAD 2012, the external file appeared very 'dull' and blurry. But when I look at the same file in the new AutoCAD 2013, it shows very clear.. this puzzles me, and our clients are complaining about this quite often.
Is there a setting I can change in 2012 version to make it (external file) clearer? The right hand side shows the external file (table and words) much better than the left.
View 1 Replies
View Related