AutoCAD 2010 :: Intersection Osnap Appears On Zoom Out But Disappears When Zoom In
Feb 22, 2012
The AutoCAD doesn’t show the “intersect osnap” at certain zoom!
The “intersection osnap” between a “hatched rectangle” and a “DASHDOT2” line appears and disappears depending on the amount of zoom!
As I zoom out the “intersection osnap” appears but when I zoom in, it disappears
Why the "intersection Osnap" should disappear as I zoom in?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 2 Replies
ADVERTISEMENT
Feb 27, 2013
I am working on getting some settings done, moving from 2008 to 2012. How do you set the Middle Mouse Button (wheel) to either Zoom All or Zoom Extents when you double click it? I thought it was set in the Main CUI file.
View 9 Replies
View Related
Apr 7, 2013
I Posted This problem twice but it doesn't showed in the forum. I don't know why, whatever, My problem is making Array with a circle and a line[same as to radius]. When i use array between them to create 9 more lines, some lines are becomes bigger then the original line. why this happen? I attach a file to be understand clearly. Zoom the intersection point of lines and the circle.
View 3 Replies
View Related
Jan 19, 2012
I have a georeferenced drawing with aerial photos and linework that I have Xref'd in a recent survey drawing. I checked that the coordinate systems match and the xref shows that it is loaded and the layers are listed as on and thawed.
However, the xref is not visible.
I tried a new blank drawing using the Map 3D template, same coordinate system. Same thing happens. However, this time, I noticed that the xref is visible when zoomed out. When I zoom in, it disappears. Screen shot attached.
View 6 Replies
View Related
Oct 8, 2013
i inserted an areas image with geomap but as i zoom cloce the image disapears and i get a tile with a white image of a camera. can i disable it? it is very annoying.i dont care if i loose ressolution if i get closer .why autodesk did that?
View 3 Replies
View Related
Jan 8, 2013
My keyboard has a zoom key with + and - selections. I use to use this key in drawings to zoom in and out when in the AutoCAD application when we had Windows XP. Now that I have Windows 7 I can't do this. I can't find out how to assign this key on the Microsoft Keyboard interactive software either. I have the other keys assigned as desired.
Can I still use my keyboard zoom key to zoom in and out in drawings? If so, how do I set this up in AutoCAD, or do I need to do this through a Microsoft keyboard application?
View 6 Replies
View Related
Apr 5, 2013
I am having problems with zoom, pan and rotate at high zoom level. The movements becoming jerky and delayed. But for whatever reason the problem exists in some assembly files and not in the others.
View 9 Replies
View Related
May 21, 2012
Am using CS6- when I click on Zoom tool it appears as a minus,I then have to hold down alt to change it to plus. I am using Apple Lion.
View 1 Replies
View Related
May 15, 2012
Recently when I upload photographs in Photoshop Elements 8, the images in the catalogue appear as an hourglass when viewed as multiple images, but when I zoom in to a single catalogue image the picture appears. Previous images in the cataloge appear as normal.
View 2 Replies
View Related
Feb 15, 2006
I use Photoshop CS2 to create Designs for webpages. These designs have pixel-exact elements, e.g. a 1-pixel-line from top to bottom.
Now when I zoom in (>100, then I have sort of anti-alias, so that the 1-pixel-line isn't only one blue anymore, but it has different blue tones. I guess for photo manipulations etc. this anti-aliasing zoom is great, but for webdesign it sucks because I don't know if only the zoom make the line "corrupt" or if it really is corrupt.
Is there a way to change this zoom?
View 3 Replies
View Related
Feb 21, 2008
recently my zoom tool changed from default zoom in + to zoom out -
View 1 Replies
View Related
May 27, 2012
I can't find in new max (2013) settings for zoom. I want to set Zoom about mouse pointer and adjust a bit zoom speed (now it is too much for one mouse wheel step).
I can't find zoom settings in 3ds max 2013. Where they are? I think that in previous max it was in Customize -> Viewports tab. But now it is not there.
View 3 Replies
View Related
Aug 22, 2011
Is it possible to use undo in AutoCAD without zoom & pan?
View 9 Replies
View Related
May 2, 2011
It seems that the 'combine zoom and pan commands' option doesn't work correctly. Let's say it doesn't react as i am used to in previous version. now i have to do the undo command or 'ctrl z' many times before i am back at the point where i want to go. I using the middle mouse button often to zoom in and out, and for panning. but now there are a lot of steps to undo if you want to go back.
I tried to switch of and on this option in the options dialog but no difference.
View 9 Replies
View Related
Mar 8, 2013
when i am i the viewports and use the "scl" shortcut click zoom to scale nothing will happen i can zoom use anno. in the lower right corner or propties.
is there a buttom or a prompt that needs to be fixed.
View 9 Replies
View Related
Sep 18, 2012
so i select numerous objects and can see their grips. I then go and zoom and/or pan around the place, and the grips disappear!
why is this happening?
Is there a fix?
View 1 Replies
View Related
Dec 1, 2009
I'm running 2002 and I have a drawing with an array of lines (forms a grid ceiling, actually). With OSNAP on I cannot grab the intersection of these lines, however, it does work on other lines in the drawing, as it usually does.
View 9 Replies
View Related
Oct 18, 2010
Using ACA 2011 and Win7 here... and I've noticed that the apparent intersection osnap does not want to work at all while working in a layout if the geometry I'm trying to snap to is also drawn in the layout.
If the geometry is in model space that osnap will work fine both in model space (through the viewport) and from outside the viewport.
View 3 Replies
View Related
Apr 19, 2011
Is there a way to adjust the settings in pan, zoom, and orbit. I've been using these commands with my mouse button and wheel. These 3 commands are not behaving properly. Whenever I make a small scroll on my mouse, the view port zooms all the way until I cannot see anything, which is very unlikely. The same goes when I use Orbit, a small movement/click in my mouse, makes a very big difference in a view port.
But everything goes well whenever I start new drawing.
View 6 Replies
View Related
Sep 7, 2012
I have a problem with the zoom and fill patterns in two PCs with Autocad 2012 In both, very often, when I zoom in on the design the fill patterns disappear.
After an update of the image reappear and this is a very big problem for me. The two PCs are both intel I7, one use a nVidia Geforce and other an nVidia Quadro, and I tried different driver versions but without benefits.
View 1 Replies
View Related
Feb 12, 2012
Why we don’t have the command “zoom to layer” in the AutoCAD?
In particular cases, we need to zoom to certain layer. Is this possible in the AutoCAD? In the ArcGIS we do have this tool.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 3 Replies
View Related
Jan 30, 2012
I get an error about transparent zoom not working because it requires a regen. I do not want to turn the autoregen off.
View 1 Replies
View Related
May 23, 2012
This happens with a number of drawings, I believe all the files are very large approximately 8mb+. The issue is that by using the REGEN or the Zoom - Dynamic command, it will freeze AutoCAD. I will have to conduct a force shutdown than restart the program.
My question is; where do I start to determine what is the cause? Where do I find an error log?
View 1 Replies
View Related
Jun 29, 2012
There is problem in auto cad 2011.When click Zoomtoolbar.All miginfing icon likes Zoom Scale,Zoom Center,Zoom Extents,.... how make visible this icon.
View 1 Replies
View Related
Jan 3, 2004
I tried searching the forums for this topic but the search thing didn't seem to work.
A friend of mine installed Photoshop CS for me (an upgrade from 7.0) and for some reason I can't use CTRL + and CTRL - to zoom in and out, I have to use the mouse with the zoom tool which slows me down quite a bit over the course of 20 or so photo edits.
Can anyone shed some light on this? I checked Keyboard shortcuts in the preferences menu and they were correct. I've made no other changes to the program.
View 8 Replies
View Related
May 6, 2012
I did notice that zoom in or out in camera raw is slow , even in middle pc , i'm not talking about hi end pc but i did find it's amazing fast if use process 2003 or 2010. May i use like default the 2003 or 2010 ? How can i do it?
View 5 Replies
View Related
Jul 12, 2011
When I select a hatch or polyline or any object with grips for that matter, and hold down shift to select multiple grips on the object or objects and then press my middle mouse button to pan or scroll it to zoom, the grips that I have selected de-select, meaning I have to set up the view so that all the grips I want to move are visible before selecting them.
This is only happening on some drawings (although it is most of them) and only when I use 2012 not 2011. Which system variable it is that has gone screwy that I need to reset? or is it something else?
View 9 Replies
View Related
Nov 30, 2011
We've tried every command imaginable. F3 doesn't work. Checked all setting is Drafting Settings, (incl. 3d). Saved, and restarted.
No OSNAPs work in any command.
View 3 Replies
View Related
Aug 15, 2013
I just thought of something that would be really cool if it were possible. I use a mouse all the time for CAD on my laptop. It's a Dell Precisiom M6500 so it is "designed" for CAD and other production work. I would like to set it up so that any time I drag on the touchpad, it pans around the drawing. Essentially just one finger scroll. Maybe pinch to zoom in and out would be cool too. This should work without clicking.
I already have the middle button on my mouse for press and hold to pan, but I like options...
View 2 Replies
View Related
Aug 24, 2011
I use AutoCAD 2011 LT and I would like to put a pan and zoom (even a pan only window would be very useful) window on. Is that possible in that version?
Or alternatively can I go back from the annoying new menu design to the ordinary one?
View 5 Replies
View Related
Sep 28, 2011
I'm playing around with the walk and fly functions. I'm able to navigate around the model, but if I stand in a room the zoom is much to great. It's like I'm looking around the room through binoculars.
View 0 Replies
View Related
