I use to be able to stretch a line by using the end grip and typing 50 , this would extend the line by 50 units
The problem i now have is that if i do the same thing thing , the line instead of strecting 50 units the line becomes 50 units long in total
is there a system variable that controls this ?
know of a variable which controls how stretching with grips works. I've got a single machine with Autodesk Architecture 2012 that when I select a grip and move it, then type a dimension in the command line, that the line becomes the dimension I typed, not the amount I moved it. For example, If i have 10" line, select and end grip, stretch it +3 inches or -3 inches, the line becomes an absolute of 3 inches. On all other machines, the line would either become 13" or 7".
[URL]
The dynamic input is off.
I recently purchased LT 2012. I was using LT 2008 until now. When I grab a line from the endpoint grip and try to lengthen it by typing in a value it either shortens the length by the value I type, changes the overall length to the value I type, or does what I want it to- actually makes the line longer by the value I type but doesn't do any of these consistently. It didn't do this in any older version I've used and I can't find a setting to change it.
View 9 Replies View RelatedPlease see the attached drawing. It's for a conveyor system, and the idea is that when you insert the block, you could then select the size of the conveyor and the angle of the turn (straight sections are another block).
What is suppose to happen is, when you insert the block, you stretch the conveyor to the size desired, and the rest of the block should scale to match. Then you select the angle of "turn", and you're good to go.
I got it all to work except... when you stretch the line out, everything scales, but the line doesn't stay in place and just stretch to the left, it moves, which leaves a gap where the conveyor should be.
I'm starting to draw a line and I want it to end above a point so that the next line I draw will be perpendicular to the first line and will end at the point. E.g., in the attached picture, I'm starting to draw the orange line and want it to end above the top-right corner of the rectangle.
example.png
How can I do that?.
on my work pc i'm missing two features i used to have:
- Firstly, when i click a PL i can't see the midpoint of the line, and can't drag the line like i used to. I tried to change GRIPS, but can only choose between 0 and 1 when choosing grips. 0 being nothing visible, 1 being visible endpoints of the polylines. 2 is NOT valid options that i can choose.
- I can't add a new vertex. I think the way i used to do it was to hover over the midpoint and it would suggest if i wanted to add a new vertex. If this is the case, it's obvious that if i get problem 1 fixed, problem 2 will solve itself.
How do I to set and to see or show the existing grips point when drawing new line?
View 8 Replies View RelatedI'm using label for line & curve.
I have discovered that the points from it is created are fixed in Z value.
You can use the grips with object snap , you can move the grips but the Z values are preserved......
it should be to get the Z value of X,Y,Z given by object snap , isn't it ?
When trying to stretch of move a line in AutoCAD using the grips, it will move additional lines that are touching. It does not do this for every line in the DWG. It seems to be random. They are not grouped. What could be the problem.
View 3 Replies View RelatedI Have a drawing that I want to get laser cut, its not a functional piece it is just going to be something that is hung on the wall.
I first drew the piece in 3D inventor then converted it to a DWG so that i can edit it in Autocad (ive been told by the laser cutter that they can process DWG drawings).
No two lines on the drawing can intersect however as i dont want the laser to remove large chunks from the peice. The problem im having is that i have to go through manually and select each line, then select the end point and then shrink it by a certain value. Since the drawing is quite a large drawing its becoming very time consuming
I cant switch the line types however because no matter what the line type when convereted to NC code the computer sees it as a solid line
ive attached a screen shot to try and explain what i mean
the one on the right is one a section that i have finished modifying and the one on the left is one that i have yet to change
I have just noticed when attempting to move the attributes in the blocks of my drawing that the grips have disappeared, where they have gone or how to turn them back on?
View 6 Replies View Relatedso i select numerous objects and can see their grips. I then go and zoom and/or pan around the place, and the grips disappear!
why is this happening?
Is there a fix?
I have a weird issue with Mleader landing lines.In AutoCAD 2012, I get only one arrow grip on mleader landing lines when I select an mleader (see image below) In AutoCAD 2010 - when I open the same exact drawing - I get TWO arrow grips when I select an mleader.
View 2 Replies View RelatedI am trying to select some portion of my drawing for layer change, but when I panning the view for additional selection, I lost the grips of first selected entities.
View 2 Replies View Relatedwe just upgraded to 2012 and the textmask grips do not show to pick and adjust. they did in 2011 but the only thing when the text is clicked upon there is a gray rectangle without grips in the corners....is the a systen varible to adjust?
View 7 Replies View RelatedIs it possible to get grip points on a circle at 45-dgree increments rather than at 90-degree increments - that is, at 45, 135, 225 & 315 degrees? (Preferably in addition to the 90-180-270-360 grips, but temporarily instead of would work also)
View 9 Replies View RelatedI'm having a small problem in AutoCAD 2012. I can't get any grips on any inserted raster image Cpipping Boundary I try to edit. I can select the edge and the line turns into a dashed line, however no grips. The grips work fine on any vector line. Is there a comand to turn on the grips?
View 6 Replies View RelatedConsider the following situation.
Ortho - ON
Polar - OFF
A line is drawn parellel to the X-axis. What I have been doing all of my career to lengthen this line, by say 3 inches, is select the line, pick the grip I want to lengthen, drag that grip in the general X direction, type the value 3 at the command promt, and hit enter. Voila, done.
Now what AutoCAD is doing, is bringing the grip (yup, ortho is stll on) to exactly where my curser is, totally disregarding the ortho setting AND the value in typing at the comand prompt.
Is there a plugin that can make more segments/grips in the line tool? Like in PS or Sketchbook Pro? Idk if Gimp has it also.. But I'm sure it does.
View 1 Replies View RelatedI have a drawing where i am not able to select multiple grips using shift/pick to make the grips "hot". I'm not able to make even one of the grips of a poly line "hot". However, while trying to solve the problem, i've opened another drawing where i AM able to make grips "hot". It doesn't appear to be a system setting issue.
View 6 Replies View RelatedI have created a dynamic block with a stretch, flip and rotate. Everything works great in its file. When I insert it in another file, the grips move but the block does not change.
AutoCAD 2014
We are creating a new company title block for the use in Inventor 2010 and AutoCAd 2010. It has initially been generated in Inventor and exported to AutoCAD. My problem is that all attributes that came over are now setup as multiline attributes and I can't seem to change them to single line. Therefore you have to open the multiline editor separately for every single item to make changes in lieu of just 'tabbing' through the values in the Enhanced Attribute Editor. This adds time and frustration and seems to be intolerable for some of my colleagues.
Is there a way to change the attributes to a single line in AutoCAD I'm just not aware of? I tried to find different settings for the export from Inventor but the options seem to be very limited.
I could probably go over this and create separate AutoCad only titleblock and border but that would kind of defeat the purpose.
I created some new custom line types using express tool featute in autocad and I saved it with a .lin extension. It is only available in that drawing itself. How I canget those line type in all my new drawings.
I tired to edit the default linetype file even it doesnot appear in the linetype manger windo.
*IRRIGATION,IRRIGATION LINE
A,1,-.066042,["IRR",Standard,y=-.104589,s=.25],-.493243,1
*SEWARAGE,SEWARAGE LINE
A,1,-.031293,["SEW",Standard,y=-.104589,s=.25],-.651197,1
I need to do it quickly with many text regions. How to make line boundary around multi-line text region corresponding to text mask?
View 9 Replies View RelatedI'm trying to make a (for lack of a better term) squarish ellipse.
I've tried a few things but they don't work too well, i.e. plines and lofting a rectangle with an ellipse then cutting it two but they just get me arcs that meet at sharp points.
The jpg below is meant to show what I'm trying to do.
I want to take that one quarter of an ellipse at the intersection and stretch/pull it to the midpoint of the line between the corner of the rectangle and the arc. The ellipse is made out of 4 ellipse arcs. I want to stretch just the arc without moving the ends of it at the quadrants.
I am writing a code to select an object (crossing) and to stretch it a certain distance on the y axis. This is the code that I have to select the object, but I cannot find what to use to stretch it. I actually found something to scale it, but it is not what I need. With ThisDrawing.Utility
Dim SP1sel1(0 To 2) As Double
Dim SP1sel2(0 To 2) As Double
Dim objSS As AcadSelectionSe
Set objSS = ThisDrawing.SelectionSets.Add("zzadsaaafatt")
' Select the object
[code]....
I have a 4' light fixture that is a rectangle. Right now I have it set up to where I can stretch it and it copies it’s self whatever length that I stretch it in increments of 4'.
Is there a way for me to modify this so that when I stretch it along an arc, that it copies its self and rotates its self along the edge of the arc?
I am trying to make a block that I can stretch. The end pieces (gusset block) never change size. The only piece that needs to stretch is bar that connects them. The gussets are always on a 45 degrees. If I stretch it over 5 inches on the X axis, it should move -5 on the Y axis.
View 4 Replies View RelatedSuppose I have a rectangle 10 x 8 and then I join the middle points of the widths with a line ... so I will end up with 2 boxes of 5 x 8. Now what I need to do is to stretch the side by 2 units to become 12 by 8 but I want the middle line to move automatically during the stretching process so I end up with two boxes of 6 x 8.
View 9 Replies View RelatedI'm experience challenge in editing The line in my dwg. The line weight on my drawing once printed, is not The same as I have set up on my pen setting style. I have tried The pedit function by increasing The line width to 0.6mm but nothing change on my preview window. It looks like there is an issue with reference editing.
View 7 Replies View RelatedWhenever I try to adjust my LTS for a line it changes the LTS of every line in my drawing instead of the individual line. How do I get it so it changes one line at a time?
View 2 Replies View Related
