Paint.NET :: More Segments / Grips In Line Tool?
Apr 24, 2011Is there a plugin that can make more segments/grips in the line tool? Like in PS or Sketchbook Pro? Idk if Gimp has it also.. But I'm sure it does.
View 1 Replies
ADVERTISEMENT
Paint.NET :: Way To Add More Than Just Four Segments Into Line Tool
Oct 22, 2011I use pdn to cg my sketches and such and I love it. I tried paint tool sai and disliked it because I don't have a tablet..I was wondering tho.. If there's a way to added more then just four segments into the line tool. The little box things if you don't know what I mean.
View 6 Replies View RelatedAutoCad :: Calculate Length Of Line Segments And Arc Segments Separately
Jan 19, 2012I have one LW polyline consisting lines and one or two arcs. I want to calculate length of all line segments and arc segments separately and the resulted values to be shown as attributes (seperate attributes for line segments and arc segments).
View 3 Replies View RelatedPaint Shop Pro :: Get Grips With Pen Tool
Jun 18, 2013I am trying to get to grips with the pen tool and I have a problem I cant get past. I create on object using the pen tool and then use the pick tool as I want to do a specific rotation buy a certain number of degrees. But I need to move the rotation point. I click on Ctrl and then the rotation point and move it to another location. Now if I want to rotate by hand or 15 degree increment then no problem.
But if I wish to rotate by say 20 degrees then I can only use the Image Free rotate but for some reason it rotates object by the center of the object and just ignores its new rotation point. I just cant see why?
AutoCad :: How To Not Make Curved Line Break Into Straight Line Segments
Jun 27, 2012I draw a curved line and would like it to remain as a curved line even after saving the file. However everytime after saving, and opening the file again, the curve breaks into many line segments, which is not what I want! I want the curved line that I draw to remain as a curved line even after saving and opening. How do I do that? I am using autocad2010.
I use the ARC command to draw a couple of lines, they look okay here. But after I saved it, and re-open it again, what previously appeared as curved lines changed in their appearance to polyline segments.
Illustrator :: Gap Between Line Segments
Aug 31, 2012How do I set two line segments apart (at suppose 12%) of it's length no matter how large or small i resize the two line segments, sort of like the settings in ChemBioDraw 13.0? In ChemBioDraw 13.0 you can look into the draw settings and it will say how far apart the two lines in the double bond is, line width etc.
View 19 Replies View RelatedIllustrator :: Connect Two Line Segments In CS6?
Mar 5, 2014I have been using adobe cs5 for a few years. If I wanted to connect the corners of two line segments, you would select the first line segment with the select tool, then switch to the direct selection tool, and drag the anchor point to the other line segment anchor point till the cursor arrow went white (signifying the other anchor point being recognized). Then you would choose "join" and it would give a nice right angle connecting the two line segments.
With adobe cs6, the direct selection tool doesn't change to white when you go over the other line segment anchor point.(Unfortunately my screen capture doesn't show the black arrowhead that you see when you are dragging with the direct selection tool to the other line segment.)
I have also attached a YouTube video link that shows what how this recognition of anchor points looks in adobe illustrator cs5, and this was exactly what I used to do when I was performing the task shown in my screen capture but with adobe.
CorelDRAW X6 :: Closing Multiple Line Segments
Dec 23, 2012I needed to join lines into a curve, and not being used to all the extra features of Corel over my old application.
I read of what seems to be a feature of closing different line segments, and it seems that Corel can join two different lines at their start and end point, and take on the characteristics of the first line selected and the help file displayed a pictures of what can be done. BUT I CAN'T DO THAT!
I am trying to do what is shown in the help file's "closing multiple line segments" right most image. Where two lines are closed with another and the new middle line is sort of shaped "in between" the two lines.
I included a file with a bitmap of the examples, and lines I traced for it, and what is happening when I try to join the curves with a bezier, both selecting both lines, and selecting start and end nodes.
How is this done?
AutoCad :: Command To Split A Line Into Segments
Jul 24, 2009If there is a command to split a line into segments? I know there is the divide command but that does not physically split the line, it just gives it points. i need the line to be seperate segments without the gap like the break command gives.
View 9 Replies View RelatedCorelDRAW X3 :: How Do Divide Line Or Circle Into Equal Segments
Jun 11, 2009I'm sure I've done this before, but I can remember how to divide a circle and a line into equal segments using CorelDraw X3.
View 6 Replies View RelatedAutoCAD Inventor :: Constructing Line Segments Across Circle?
Nov 25, 2011Trying to get evenly spaced line segments that lie on the circumference of a circle - every time I do the pattern repetition it gives me line segments the same length instead of constraining them to the circumference of the circle ?
View 1 Replies View RelatedAutoCAD Civil 3D :: Line Labels To Span Segments?
Mar 26, 2013In trying to learn more about label styles, the C3D Help instructs one to:
2. On the Layout tab of the Label Style Composer, select or create the label component that you want to span multiple segments.
3. In the Properties list, under General, change the Span Outside Segments property to True.Specify this setting for each component that you want to span multiple segments.
There is no "Span Outside Segments" to set to True in my Label Style Composer. The only T/F option under General is for visibility.
Civil 3D 2013 SP 1, 64 bit
Dell Precision T5600, 16 GB
Win 7 Professional 64 bit
Intel Xeon @ 2.0 GHz
NVIDIA Quadro 4000
AutoCAD Civil 3D :: Line Labels To Span Segments?
Apr 3, 2013Mastering C3D - the bit about spanning segments on an exterior line crossing several parcels. It works like the book shows except the crow's feet only appear at the start and end of the parcel's segment that I click on to insert the label, instead of the start and end of the whole segment. The distance the label reports is correct.
The crows feet are blocks inserted at the start and end of the direction arrow component (visibility false) in the author's style? I have turned the arrow's visibility on and can see that the arrow does not span the parcels.
I have another drawing in a later chapter on alignments that has the same spanning label style that works and I can't for the life of me discover the difference between the two.
Civil 3D 2013 SP 1, 64 bit
Dell Precision T5600, 16 GB
Win 7 Professional 64 bit
Intel Xeon @ 2.0 GHz
NVIDIA Quadro 4000
AutoCad 2D :: Creating Smooth Transition Between Line Segments
Dec 19, 2013I am a first time Autocad user and have spent most of yesterday trying to work through this issue but am still not able to perform this. I have attached an image which on the lower part of the lines shows arcs with large radii which transition to parallel lines in the upper part of the image. Where the two meet there is an abrupt change in angle which I wish to have as a smooth transition from the gradual change in angle of the arcing lines to the parallel straight lines.
pic1.jpg
This is how the transition between the line segments should look.
Illustrator :: Diamond Shape - Joining Line Segments In CS6
Nov 1, 2012I am drawing a simple diamond shape made with one rectanlge shape and multiple line segments. As I drew the design, I made sure to connect all the segments at the anchors. When I select all of the segments and try to join the paths, the end points or corners are not smooth. In other words, some of the line segment ends hang over the edges...
The image below shows the left side of the diamond, where the top portion meets the bottom...
Illustrator :: How To Prevent Brush From Being Reapplied To Line Segments
Aug 23, 2012What I'm doing is applying a brush to a line-segment and then dividing the line segment up into pieces of varying lengths using anchor points.
What happens that the long line segments show the brush perfectly, but the shorter line segments are "squashing" the entire brush into one short segment
So for example I'm trying to create a logo with hand-drawn lines - the longer pieces of the logo look perfect with my brush, but the shorter pieces are squiggly because the whole brush is being squashed down into the length of the small line segment.
I've already tried the brush options and I've tried options of selected object. Setting proportion doesn't work, because then the smaller line segments end up thinner than the rest and if I set the thickness back up then I get the same effect back.
Is there some way that I can set the full length of the line with the brush, so that Illustrator doesn't re-apply the same brush effect every time I segment the line? i.e. cut the line up without reapplying the brush to each segment.
AutoCAD Civil 3D :: Labeling A Line With Multiple Segments As One Segment?
Jul 3, 2012I have a bunch of lines that are created with multiple segments. I'd like to annotate the total length. I can't figure out to do this without labelling each segment along the line using Line and Curve commands. How do I get one annotation that only shows the total of all the sements?
View 9 Replies View RelatedAutoCAD Inventor :: Turning On Visibility Of Line Segments In Drawings?
Oct 1, 2012In drawings there are a lot of times where I turn off the visibility of certain line segments to make the view look cleaner.
What if I was to reverse the visibility of these lines segments down the road?
AutoCAD 2013 :: How To Break A Line Or Polyline Down To Equal Segments
Feb 5, 2013how to break a line or polyline down to equal segments.
View 4 Replies View RelatedAutoCAD Civil 3D :: No Curves turn Into Regular line Segments
Aug 9, 2012Our survey crew would like to upload a dxf file into their data collector in order to stake out linework such as curb & gutter with elevation. They have given up on using stakeout points as a standard procedure long before I arrived (being the cad guy I just figured everyone used points for stakeout) and up to now they would just use the 2-d linework and manually calc elev on their own. From what I understand our RLS didn't "trust" the data collector to use elevation for staking. Now that we finally talked our RLS into "trusting" the data collector as far as using elevation for staking we are running into problems with our feature lines when exporting to a dxf file. As you may or may not know when exporting to a dxf file it explodes our feature lines into lines, p-line, and arcs. Feature lines that have different elev & no curves turn into regular line segments and they still have the correct elev on each end vertex. Great. Feature lines that had the same elev for all vertex turn into a polyline with no elev or a whacked out elev. Featurelines that had a radius turn into polylines and/or arcs (I don't know what it's using to determine this) but either way the elev is zero or whacked out once again. No good!
So, using a dxf file in their data collector to stakeout linework with elevation? If, so what is your procedure?
Furthermore I find it absolutely ridiculous that... oh never mind, it does no good to complain about the complete lack of transparency between C3D, surveyors, and surveying equipment.I have tested the dxf file with both C3D 2011 & 2012. I have not tried it with 2013, maybe that has changed? Our survey crew is using a Tsc2 data collector.
AutoCAD 2010 :: Stretching A Line With Grips
Feb 25, 2012I use to be able to stretch a line by using the end grip and typing 50 , this would extend the line by 50 units
The problem i now have is that if i do the same thing thing , the line instead of strecting 50 units the line becomes 50 units long in total
is there a system variable that controls this ?
AutoCad 2D :: Midpoint On Line Not Visible (Grips)
Aug 23, 2012on my work pc i'm missing two features i used to have:
- Firstly, when i click a PL i can't see the midpoint of the line, and can't drag the line like i used to. I tried to change GRIPS, but can only choose between 0 and 1 when choosing grips. 0 being nothing visible, 1 being visible endpoints of the polylines. 2 is NOT valid options that i can choose.
- I can't add a new vertex. I think the way i used to do it was to hover over the midpoint and it would suggest if i wanted to add a new vertex. If this is the case, it's obvious that if i get problem 1 fixed, problem 2 will solve itself.
AutoCad :: How To See Existing Grips When Drawing New Line
May 2, 2011How do I to set and to see or show the existing grips point when drawing new line?
View 8 Replies View RelatedAutoCAD Civil 3D :: Range Of Point Numbers Makes 3D Line Segments
Jan 29, 2013The command for Creating Lines by Specifying a Range of Point Numbers makes 3D line segments. Is there an option to make a zero elevation polyline running through cogo points that are 3D (the 3D line segments occur even if the cogo points are set to flatten elevation)?
View 5 Replies View RelatedPaint.NET :: Line Tool Not Visible?
Jan 27, 2014have just downloaded paint.net - no problem on many basic functions but cannot get the line tool to give me a visible line. I have changed primary and secondary colors to make sure regardless of whether I'm left or right clicking the line will stand out against white background. I have increased width to six pixels to make sure it will be nice and thick and visible. I do get the four little box thingies when I release the cursor, and I can then go in and manipulate them. But no matter what I try I cannot SEE a line.
View 5 Replies View RelatedPaint.NET :: Using Line / Curve Tool
Jan 23, 2014When using the Line / Curve tool, I tend to cause a line to "finish" because when I try to click on a handle to bend the line, I miss, (due to poor vision)... and the line can no longer be adjusted. Is there a way to cause the handles to re-appear so I can complete the line the way I need to? "Undo" only makes the line disappear, and I have to start all over.
View 5 Replies View RelatedPaint.NET :: Line / Curve Tool
Jan 13, 2014i'm drawing a logo and have used the line/curve tool a lot. once i have got my basic shape and have rubbed out the lines i no longer need, is it possible to reselect a line and change the curve?
View 3 Replies View RelatedPaint.NET :: Line Tool To Have 5 Or 6 Anchors In It?
Jul 21, 2013Is there any way that can add or make the line tool to have 5 or 6 anchors in it..??
Attached Thumbnails
AutoCAD Civil 3D :: Grips For Labels For Line And Curve Does Not Use Z Changes?
Aug 28, 2013I'm using label for line & curve.
I have discovered that the points from it is created are fixed in Z value.
You can use the grips with object snap , you can move the grips but the Z values are preserved......
it should be to get the Z value of X,Y,Z given by object snap , isn't it ?
AutoCAD 2013 :: How To Stretch Or Move A Line Using Grips
Jul 18, 2013When trying to stretch of move a line in AutoCAD using the grips, it will move additional lines that are touching. It does not do this for every line in the DWG. It seems to be random. They are not grouped. What could be the problem.
View 3 Replies View RelatedAutoCAD Map 3D :: Tool Tips For Grips
Oct 24, 2011where the tool tips for grips on polylines have gone in 2012? The stretch, add, delete and the convert to arc. I have a feeling that a setting has changed and I can't find it.
View 7 Replies View Related