i have been sent a border from my client which has been drawnt in model space and they are asking the border they sent me for my drawings to be inserted into Paper space. When i insert the border into paper space the border is way to big for the paper space and i dont know how to make it fit ISOA1 size.
View 2 RepliesUsing acad2011 I would like to place a border (rectangle) in paper space so it measures 2cm form all sides of the paper when i print it.
View 6 Replies View RelatedIn 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
I can log into another user's computer and open the file fine. But when i use my computer or a brand new computer fitting all Auto CAD specs, it locks up. When I plot I have to reset my settings to the PTE standards every time.
I now get CAD errors when CAD is not even open. Also VTPSUHM barely works. I generally have to restart my computer several times to get it to work.
How does one accurately rotate the view so that view in paper space is parallel and perpendicular to the border sheet without guessing the angle?
View 3 Replies View Relateddetermine if Fields can be used in model space inside a block and show up in the paper space view as a correct number, (say for a detail number)? I have all of my detail blocks in model space and would like to place fields in the title blocks of the details so that they would show the paper space sheet number that they are being shown on in paper space. I have done some experimenting and cannot seem to get it to work. Or will this just not work?
1.- Details in model space are blocks, and I want to edit the block and insert a field into the detail callout.
2.- I want to have the model space detail read the paper space drawing number, and have the fields change to the proper sheet number.
3.- The result will be the that the model space block fields have changed to the proper detail sheet number shown on the paper space border.
I have a drawing that has several Paper Space tabs, and each tab has one or more viewports.
When I open the drawing, I can see all the information in Paper Space mode, and I can access the Model Space through the viewports, using the MS command. When I switch to Model Space, nothing is displayed.
So I just recieved drawings from a contractor and they placed all the multileaders and details on the paper space but when I go to change the model space things are no longer pointing at the right spot.
What I am trying to do is copy them into model space but.... when I use crtl-c from paper, crtl-v to model it doesn't scale properly.
I had the need on occasion to dimension in Paper Space. I set up a "Dim Style" to accomplish this in either 1/8" or 1/4" Scale. The problem I am having is the consistency of the actual dimension.
For example: I could draw a simple box 10'x2'. When I dimension in Paper Space, sometimes it correctly displays the dimensions and sometimes it incorrectly displays the dimension.
I attached 2 screen shots of what is happening. Notice the dimension on top of the box shows 10', but when I dimensioned the bottom of the box it shows 480'. This seems to work at random.
The other screen shot shows the Dim Style settings I used.
We detail an extensive amount of 3D solid entities using viewports in layout tabs. Most of detailing entities are in model space, things like dimensions, part callout, and other text entities that provide description as to what's going on in the viewport. Periodically, there is a need to create entities in paper space. Lets say for example, I'm zoomed out to the layout of the page setup, and I have a viewport with a lot of 3D solid entities. Still zoomed out now, I want to add an icon to the corner of the viewport. When I invoke the "endpoint" osnap to insert my icon at the viewport's, without zooming in, and try to pick a corner of the viewport, the icon gets inserted to an endpoint of an entity that's in model space. What a pain in the behind. The only real work-around is to zoom right into the corner of the viewport, which defeats the whole point of osnaps in the first place.
I remember this not being the case. Did AutoCAD introduce a variable and set it's default to something that I don't it to be, or is this a screw-up of AutoCAD?
I reloaded my CAD and now I have a black background in paperspace. This is what I want but I want it to print white while haveing a black backgroud for drawing. How do I do this?
View 3 Replies View RelatedI am attempting -- without much success -- to put my dimensions in paperspace. The problem is that sometimes (almost always) the dimension value is in paperspace. That is, when I do a Linear Dimension of two points of an object while in paperspace the resulting value will be a few inches instead of many feet.
My model is drawn at full size; my viewport is set to 1/4" = 1'-0"; I am using ACA 2012.
I am not sure if it instructive, but I have found:
- The only time it comes out correct is if my first point is at 0,0. But if the second point is 0,0 it will be wrong (paperspace value). Bizarre
- most of the "wrong" dimensions have the "Associative" property set to "No". The box is grayed out so I am not sure how to change it.
- If I MEASUREGEOM, the value is the correct model space length but if I do a linear dimension using the same two points the value is in paperspace.
When dimensioning in paper space and move or make any adjustment to the viewports the dimensions go haywire and move of the parts but not all dimension and not all viewports are doing this. I'm using the same dimension style and templates that I normally use.
View 2 Replies View RelatedHow to change your settings so that when dimensioning an object that is in model space, while floating over it in paper space, it will give you the actual dimensions in model space?
Seems that it should be a variable setting or something you can change in DIMSTYLE.
way to change the background color (color outside the "paper" in paperspace?
The light gray that I can't seem to change, is suboptimal for me.
I'm trying to draw dimensions in paper space but:
It's not possible to work with annotation dimensions on paper space?
Using the traditional way and neither. Because AutoCAD 2010?
My mtext that i have created in model space is not visible in my paper space viewports. What can i do to fix this?
View 5 Replies View Relatedin general, I add my multileaders in paperspace after I have set my model space scale. However, I am now bound to that scale! That is, ML in paperspace really only have one scale: 1-1, right? For example, I wanted to zoom in to a part of my project (ie, reduced my scale by a 1/3) and all my ML we pointing erroniously into space.
Just so I undestand, if one anticipates changing the scale of a drawing mid-project, the ML should be made annotative, and placed in model space?
I received a drawing form a vendor that is in 3d (27 meg)...this drawing contains the model and 4 paper space sheets.
These sheets contain different pieces of the 3d model. I need to create four 2d drawings (one for each sheet). I have tried "export layout to model" with no luck as most of the drawing does not export. I have tried to copy to clipboard but, drawing is too large for the clipboard. I have looked in the "help" and there seems to be nothing on converting a 3d drawing to a 2d drawing or extracting indivigual sheets to a 2d format model. I have tried exploding the information on the sheets in order to get everything to export but that doesn"t work.
I am on ACAD 2012 overlaying dimensions in paperspace to objects in model space..The dimensions keep changing to an incorrect number..Can't identify when it is happening yet. The dimensions are always larger
If I change dim style and back again the correct dimension appears. I can then matchprop to get the other dimensions to appear correctly. But twenty minutes later they are all changed again
I turned of Annotative scale for dimension features and use overall scale of 1.
I've picked up someon elses drawings and for some reason in paperspace the ltscale is set to 10. i've tried changing the global scale factor to 1 in the linetype manager but it keeps changing back to 10 when i tab through the different sheets.
i normally have both my ltscale and psltscale set to 1 in paper space (and celtscale=1) and have a custom macro asigned to a button for my modelspace views ie 1.100,20,10 etc and a macro/button setting the ltscale back to 1 when returning to paperspace and this worked nicely.
why the global scale factor keeps reverting back to 10?
When working in paperspace existing or new layout viewports are non-selectable. The viewport boundary is not visible and all layers are turned on and thawed. Is there some sort of toggle to make viewport boundarys visible and selectable?
View 6 Replies View RelatedIn paper space, some of my drawings lose color palette showing only black and white, some others not. How can I change the settings make all drawings looking unanimous in colors?
View 4 Replies View RelatedI have wall section sheets that are best viewed in portrait mode, but use the same landscape page setup as the other sheets in the set. So the viewports for the sections are rotated 90 degrees and difficult to read on the screen. Is it possible to rotate the paper space UCS and rotate the paper space "view" to match the UCS, like you can in model space?
I don't want to rotate the viewports and title blocks themselves & set up a portrait page setup. This is because I'm using Acrobat's PDF maker for batch plotting and not using the same page setup for each sheet makes one click, fire-and-forget publishing impossible. And I don't want to use DWG-to-PDF because it doesn't have any configurable image compression settings that I know of.
If it's not possible, then it's not the end of the world. We have AutoCAD Architecture and AutoCAD LT 2012 & 2013.
I just changed jobs to a company that uses MEP2012. It seems as though it is not possible to revert to Acad classic with this version. So, I am trying to mimic classic as much as possible.
One of the challenges I have found is finding the paper space tabs and model tab? it used to be directly above the command line, is there a command to turn it on?
How can I convert drawings on paperspace into PDFs and DWFs with the correct scale? I measured everything on paperspace and it's right; but if I convert them to PDFs and DWFs everything srinks a little and the scale doesn't match at all. What settings or ways to match the scale into what it's suppose to be to convert it to PDFs and DWFs?
View 4 Replies View RelatedMy "center" line shows up fine in model space, but just solid lines in paper space.
View 7 Replies View RelatedI am on ACAD 2012
I am using paper space dimensions and have a problem that they keep changing
I have attached a drawing demonstrating my problem. The square is 12' x 12''. Everytime the file is opened DIM SCALE LINEAR is multiplied increasing all dimensions by the multiplier. It does this each time the file is opened.
You can right click remove overrides on the dimension to get it to appear correctly (I don;t have any overides the software is overiding on open.
I've created a drawing in model space, added text in paper space. When I go to plot the drawing the text is rotated 90 degrees instead of staying oriented the way I added it. There must be some setting that I am missing somewhere!
View 9 Replies View RelatedI want to create finished paperspace-tabs, with a specific layer-configuration.
How can I manage that?Each tab has to be exported to PDF as a finished configuration, without changing layers in the end.
I've attached an image of my problem for reference. I've had this problem in other versions of CAD so it's likely a user error that I'm not clear on how to fix.
I have several dimensions which I'm trying to place on my drawing through VPMAX in my viewport, but the text keeps showing up upside down. When I manually tell it to rotate 90 degrees, the text remains upside-down but the landing becomes vertical. When I rotate 180 degrees, the text becomes vertical which isn't really useful. Rotating 270 degrees almost solves my problem, but the landing is once again vertical.
If it matters, the UCS coordinates have been rotated 90 degrees for ease of viewing in paper space.
Is there any way to copy a viewport that includes model space and paper space at the same time to another drawing?
View 5 Replies View Related