AutoCAD 2010 :: Cannot Hit Shift To Switch To Extend Command Instead
Mar 14, 2012Inside the trim command I cannot hit "shift" to switch to the extend command instead.
View 6 Replies
ADVERTISEMENT
AutoCAD 2010 :: Extend Command Doesn't Work
Mar 10, 2012I have a 3d drawing file which I manually flattened except the section. The ground plan is at 0 Z axis.
Now I am trying to draw lines on top of it, and I cannot extend my lines. Any solution to this?
Additional question:
I also had some difficulties when I was trying to flatten the 3d model. "Flatten" command did not work. I understand Flatshot did not work because these are not solids. But why Flatten did not work? That was why I had to manually change start and end of z position.
AutoCAD 2010 :: Command To Switch From Model Space To Paperspace?
Feb 22, 2012I'm looking for a lisp that will allow me to switch from Model Space to Paper Space and vice versa.Looking for another option other then the "Quick View Layout/Drawings".
View 6 Replies View RelatedPhotoshop :: Using Shift Key To Extend Line Or Paint Stroke
Aug 2, 2012I've been using a very old version of Photoshop for the last 10 years and I'm used to using the shift key to extend a line or paint stroke. By that I mean, I use the paint tool to make a dot and then hold down the shift key and make another dot elsewhere and that creates a straight line. I just purchased CS6 and that function doesn't seem to be happening. Is this something I need to activate in a preference?
View 10 Replies View RelatedAutoCAD LT :: Extend / Trim Command Very Slow While Zoomed Out?
Aug 14, 2012A problem i have encountered with LT 2011 is the extend or trim command freezing/taking a long time to extend or trim.
If i zoom up close, extend/trim works as normal instantly, but if i zoom out further & try the same extend/Trim it can take 30 seconds or more.
I dont remember having this issue on previous LT versions, I've found this with many if not all drawings
AutoCAD 2013 :: Comprehending Edge Option In Extend Command
Apr 27, 2012I've been practicing my autocad and I'm having a problem comprehending the Edge option in the Extend command. I have tried using both options i.e. "extend" and "no extend" and I don't see any difference. What is the purpose of the edge command and it's two options?
View 8 Replies View RelatedAutoCad :: Command To Use To Switch Between These Two Options?
Apr 26, 2012sometimes the 'last' entity is whatever the last one in the current view is (the entities you can see on the screen), but sometimes the 'last' item is the very last item created, whether you can see it in the view or not. what is the command to use to switch between these two options?
View 5 Replies View RelatedAutoCad :: Switch On All Layouts By One Command (shortcut)?
Dec 18, 2011is it possible to switch on all layouts by one command (shortcut)?
View 5 Replies View RelatedAutoCad :: Command To Switch View Ports Without Mouse For Making A Script
Mar 26, 2011i am looking for a command to switch view ports with out the mouse for making a script.
View 1 Replies View RelatedAutoCAD 2010 :: Extend Leader To Text
Feb 8, 2012I have turned off or unchecked "Extend leader to text" (Multileader Style > Modify > Content > Extend leader to text) in all my templates.
Yet, when I start a new drawing using those templates, that feature is turned on (checked) again.
I've tested this several times. Yes, I'm using the same templates I've been saving. I've even created a new template from scratch with none of our standards in it. The check for Extend leader to text keeps returning.
I've tried this in both AutoCAD and Civil 3d.
Any way to duplicate this?
[URL].....
AutoCAD 2010 :: 3D Offset Or Scale Or Extend?
Feb 20, 2012I have a rectangle shape (a 3D polyline) as in the attached DWG. I want to Offset, Scale, Extend (call it whaever you wish) so that the new 3D polyline (after the scale, offset or extend) is at the same plane as the original one.
Obviously the Z values of the new 3D polyline will be different from the original.
AutoCAD 2010 :: Lisp To Extend All Layouts
Jun 15, 2013Is there an LISP file that can zoom extends all layouts?
View 1 Replies View RelatedAutoCAD 2010 :: Trim And Extend Will Not Work
Feb 14, 2013I am using Autocad 2010. I have been using 2008, but recently upgraded. I have a project that one particular file is driving me nuts! I can not use trim or extend on any existing line work. However, if I draw two non intersecting/crossing lines and ust the 'TR' command it works fine. I have checked to see if all lines are in the same plane and the appear to be. The only way I can trim or extend is if I use the 'Flatten' command.
View 6 Replies View RelatedAutoCAD 2010 :: Multileaders And Extend To Text Option
Dec 15, 2011I am in no way an expert in ACAD.We are experiencing "random" problems where we have a multileader with left justified text and the leader extension option turned on. There is probable a common trait with all the offending leaders but we are yet to see it.
Basically, with some leaders, the landing length is being set to a negative value. We have only noticed this since we turned on the extend leader to text option. The result of this is that the leader lines can sometimes cross through the text. Sometimes we fix them, then they revert to a negative value again when we close the drawing.
We can, of course, uncheck the extension option in the drawing and the problem appears to go away. However, we have unchecked this option in our templates now, but when we open a new drawing based on the updated templates, the option is checked again.
3ds Max :: Command Line Driver Switch?
Jul 22, 2011Is it possible to choose a viewport driver before launching 3ds max? I assume there could be a switch I would set in a desktop shortcut.
View 3 Replies View RelatedAutoCad :: Switch X And Y Coordinates In LT 2010?
Aug 25, 2011A while back, I sent some dxf files (all made in AC Lt 2010) to a company that uses a system called DP/Com. Apparently, this program reads coordinates (Y,X) instead of (X,Y), which means that they think all of my files are really wierd . Each and every number in the coordinates of my points are correct, so it's just the order I want to change.
Is there any way to "switch" the coordinates of several points at once in AC? (Without having to extract a coordinate list, switch columns in Excel and then importing them back...?)
AutoCAD 2010 :: Caps Lock Seems To Switch Itself On And Off
Feb 2, 2012I dont know if this an Autocad Lt 2012 or windows 7 function, but a lot of times when I'm typing in Autocad (using Dtext), the caps lock seems to switch itself on and off, which of course is extremely annoying.
How do I set Autocad or Windows 7 not to do this.
AutoCAD 2010 :: Windows 7 Taskbar Switch
May 13, 2010We are having the issue with all of our Windows 7 machines that you cant switch back to Autocad using the Windows 7 taskbar. When this happened with 2010 we chalked it up to 2010 not being compliant with the new taskbar in windows. But when it started happening with our Acad 2011 installs it gets frustrating. Alt Tab doesn't work. Hover and select a preview window doesn't work. The only thing that works is starting task manager and clicking 'Switch to'.
View 9 Replies View RelatedAutoCAD 2010 :: Shift Key And Ortho Lock
Jul 22, 2010I just got a new dell inspiron laptop and installed ACAD 2011. Normally I draft with the ortho lock on and hold down shift when I want to disable it temporarily. With my new laptop this doesn't work. Holding shift down doesn't seem to make any difference at all.
View 9 Replies View RelatedAutoCAD 2010 :: Command Not Showing Up In Command Line
Nov 27, 2012without reiterating a lot of what is said in this thread: [URL] ......
This happen outside the potential malware infection?
if you care to not click-through, the problem is that certain commands (not all of them) simply do not disply in the command line. so the MOVE command for example looks like this:
NORMAL:
Command: _move
Select objects:
NOW:
Command:
Select objects:
same with QSAVE and who knows how many others.
AutoCAD 2010 :: Make Osnap Menu Appear With Shift+right Click?
Aug 26, 2010New hardware and fresh upgrade to v2011.
All computers will show the osnap menu when we shift+right click but one computer shows the regular short-cut menu.
How do i make the osnap menu appear with a shift+right click?
AutoCAD Civil 3D :: 2010 - SID Files Shift If View Rotated
Feb 1, 2013When I rotate my view in drawings containing .sid orthos, the orthos shift. This also happens when I rotate the view in a viewport. I've attached a couple screen caps showing the problem.
View 6 Replies View RelatedAutoCAD 2010 :: Shift -> Right Click Not Pop Up OSNAP Menu In 2011
May 23, 2012My Application Migrate from AutoCad 2008 to 2011.Shift right click osnap menu is not pop up.
View 3 Replies View RelatedAutoCAD 2010 :: Can't Use CTRL Or SHIFT To Select Multiple Things (not Really DWG Related)
Sep 4, 2013So this really doesn't have much to do with objects in a drawing. Say for instance, I go into the PURGE dialogue box, and I want to select multiple layers to purge, but not all of them. If I click a layer, and the hold CTRL and click other layers, the only one that stays highlighted is the one I just clicked...so using CTRL doesn't allow me to highlight multiple entities at the same time.
It's gets a little more weird using SHIFT. The conventional SHIFT method (works in Windows Explorer and other applications) is clicking an object, holding SHIFT, and then clicking another object further down the list...this will highlight both of those entities clicked, plus every single entitiy in between them. In AutoCAD (use the PURGE dialogue box again for reference), if I click an object, hold SHIFT and click an object down the list, it will highlight the last object clicked and everything in between the two, but it will deselect the original object. Also, if I use SHIFT to select multiple objects, and then go back to the original that was deselected and hold CTRL to select it, the last object that was selected using SHIFT gets deselected.
AutoCAD 2010 :: System Variable For Holding Down Shift And Picking Multiples
Oct 10, 2012Is there a system variable for holding down shift and picking multiples?
When picking multiples files, to bring in xrefs, I can pick them, but some of the other in the office can not, it want let them pick more then one file at a time.
AutoCAD 2010 :: Unable To Select Multiple Grips Using Shift / Pick In Drawing
Mar 29, 2012I have a drawing where i am not able to select multiple grips using shift/pick to make the grips "hot". I'm not able to make even one of the grips of a poly line "hot". However, while trying to solve the problem, i've opened another drawing where i AM able to make grips "hot". It doesn't appear to be a system setting issue.
View 6 Replies View RelatedAutoCAD 2010 :: Shortcut Menus Mouse Buttons (CRTL+Right Click And SHIFT+Right Click)
Feb 15, 2013I have two menus that I use often and I would like to add them to my mouse buttons. Attached is a picture of the two menus I like and the two buttons. The Shift + Click has the correct menu already (Osnap menu2) my problem is adding my custom menu to the CTRL + Click doesn't work. I labeled Osnap Menu 1 and 2, 1 being the custom menu I have use in the past and 2 being the default osnap menu that comes with the cui file. How to get the second button to read my menu rather than both read the same osnap 2 menu?
View 1 Replies View RelatedGIMP :: Switch Between Eyedropper / Brush Switch
Jan 9, 2013If there is a way to switch between the eye dropper/brush tool fast.
On Photoshop there the "alt" key but on my mac it really wastes a lot of time for blending colors .
AutoCAD 2010 :: How To Know In Which Bar A Certain Command Is
Dec 7, 2011How to know in which bar a certain command is?
For example, if in need to know the bar in which the command “Align” is, what to do that?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
AutoCAD 2010 :: Exception In ARX Command
Oct 3, 2010AutoCAD was working fine on my machine for several months, and now I'm getting this error.
Exception in acmgd.dll ARX Command
Tried repair, resinstall, then uninstalled and installed again, and this keeps coming up.
AutoCAD 2010 :: Turn On Command Bar
Feb 10, 2012I seem to have lost my command bar on my AutoCAD 2012 drawings. I looked into Options and can not seem to find the command to turn it back on.
View 1 Replies View Related