AutoCAD 2010 :: Lisp To Extend All Layouts
Jun 15, 2013Is there an LISP file that can zoom extends all layouts?
View 1 Replies
ADVERTISEMENT
AutoCAD 2010 :: LISP To Create Layouts Using CSV File?
Aug 8, 2013Lisp that can create layouts (using a dwt--I would code in the file path to my dwt) reading data from a csv file??? I would create the drawings ahead of time, all I would need is to run the lisp and it would create all the layouts in those dwgs and name them according to the csv.
The csv file contains the drawing names in column A and the layout names in column B. So, what I want to do is create "n" number of layouts in specific dwgs, using the cell data it reads from column A--which are the drawing names, and then rename all those layouts with the cell data from B--note it would not create duplicate (existing) tabs. This way I can re-run it later to add new layouts to the drawings as needed.
The reason is that I work on projects with several hundred layouts--thus the need to create layouts more easily across as many drawings as necessary. Instead of renaming/deleting a ton of layouts; it would be easier to start with a minimal template(s) and have the lisp create the exact number of layouts we need instead of going back and making a ton of edits. Since the csv is created at the beginning of the project, any changes later (adding layouts), can easily be done by running the lisp again.
AutoCAD Visual LISP / AutoLISP :: Turning Off Layouts Tab
Jun 6, 2013I dont like to have Layouts Tab (Model, Layout1, Layout2,...) on bottom left side of AutoCad and I prefer to hide it.
Is there any system variable for that purpose? I just hide it via lisp only:
(vlax-put-property (vlax-get-property (vlax-get-property (vlax-get-acad-object) 'Preferences) 'Display) 'DisplayLayoutTabs 0)
AutoCAD Visual LISP / AutoLISP :: Can't Delete All Layouts?
Mar 4, 2013Why can't I get this to work?... okay, it is being used via AcCoreConsole.exe
I get the following...
; error: bad argument type: VLA-OBJECT nil
(defun delAllLayouts ()
(vl-load-com)
(vlax-for item
(vla-get-Layouts
(vla-get-ActiveDocument
[Code]....
AutoCAD 2010 :: Extend Leader To Text
Feb 8, 2012I have turned off or unchecked "Extend leader to text" (Multileader Style > Modify > Content > Extend leader to text) in all my templates.
Yet, when I start a new drawing using those templates, that feature is turned on (checked) again.
I've tested this several times. Yes, I'm using the same templates I've been saving. I've even created a new template from scratch with none of our standards in it. The check for Extend leader to text keeps returning.
I've tried this in both AutoCAD and Civil 3d.
Any way to duplicate this?
[URL].....
AutoCAD 2010 :: 3D Offset Or Scale Or Extend?
Feb 20, 2012I have a rectangle shape (a 3D polyline) as in the attached DWG. I want to Offset, Scale, Extend (call it whaever you wish) so that the new 3D polyline (after the scale, offset or extend) is at the same plane as the original one.
Obviously the Z values of the new 3D polyline will be different from the original.
AutoCAD 2010 :: Trim And Extend Will Not Work
Feb 14, 2013I am using Autocad 2010. I have been using 2008, but recently upgraded. I have a project that one particular file is driving me nuts! I can not use trim or extend on any existing line work. However, if I draw two non intersecting/crossing lines and ust the 'TR' command it works fine. I have checked to see if all lines are in the same plane and the appear to be. The only way I can trim or extend is if I use the 'Flatten' command.
View 6 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Number Of Layouts In Another Drawing
Oct 4, 2013As you smart individuals can figure out, we do up drawing packages for construction that consist of several drawings, hundreds of drawings, for several modules of construction. Our process usually consists of one layout per drawing, so that the lisp guy can do a drawing count and put in sheet numbers based on how I manipulate the list of drawings in the one directory folder.
Now I have a client, despite the way we currently do things, requires that about 70% of the drawings will have multiple layouts. Now we're back in the stone ages, manually putting in sheet numbers, eating up our budget for this contract.
AutoCAD Visual LISP / AutoLISP :: Rename All The Layouts Automatically
Jan 10, 2013I am looking for a lisp that will rename all the layouts automatically. I tried the Layoutlist function but the output is not in order. Is there anyway that i can get all the layouts in a drawing from left to right order. for eg. i have layouts from layout1, layout 2........layout10). The layoutlist returns as layout1,layout10 etc...instead of layout 1 layout 2.
View 4 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Routine To Rename All Layouts?
Sep 23, 2013I am looking for a LISP to automatically rename all my layouts. I would like the first layout to say "HWY 400 (01)", second layout "HWY 400 (02)", third layout "HWY 400 (03)" ect..
View 4 Replies View RelatedAutoCAD 2010 :: Multileaders And Extend To Text Option
Dec 15, 2011I am in no way an expert in ACAD.We are experiencing "random" problems where we have a multileader with left justified text and the leader extension option turned on. There is probable a common trait with all the offending leaders but we are yet to see it.
Basically, with some leaders, the landing length is being set to a negative value. We have only noticed this since we turned on the extend leader to text option. The result of this is that the leader lines can sometimes cross through the text. Sometimes we fix them, then they revert to a negative value again when we close the drawing.
We can, of course, uncheck the extension option in the drawing and the problem appears to go away. However, we have unchecked this option in our templates now, but when we open a new drawing based on the updated templates, the option is checked again.
AutoCAD 2010 :: Extend Command Doesn't Work
Mar 10, 2012I have a 3d drawing file which I manually flattened except the section. The ground plan is at 0 Z axis.
Now I am trying to draw lines on top of it, and I cannot extend my lines. Any solution to this?
Additional question:
I also had some difficulties when I was trying to flatten the 3d model. "Flatten" command did not work. I understand Flatshot did not work because these are not solids. But why Flatten did not work? That was why I had to manually change start and end of z position.
AutoCAD 2010 :: Cannot Hit Shift To Switch To Extend Command Instead
Mar 14, 2012Inside the trim command I cannot hit "shift" to switch to the extend command instead.
View 6 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Delete All Empty Layouts From Drawings?
Mar 10, 2004I am trying to create a lisp to delete all the empty layouts from mydrawings. I do not see any code to control this.
View 8 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Resize Viewports Across Multiple Layouts
Jun 25, 2012Any routine to re-size viewports in multiple layouts? We have to re-size viewports as they were created a little too small and are now spread across almost 1000 drawings in 18 dwg.
View 6 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Delete Block From Multiple Layouts
Apr 26, 2012I got a model-file with several layout tabs and I want to delete a block in all layout tabs.
View 9 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Create Layouts In Multiple Drawings
Aug 10, 2013I have a csv file that has the drawing names and their layout names listed in columns A and B. Before I begin a project, I have to create the Sheet List (in Excel) and the csv file. The csv file is needed because I have a lisp routine that reads the csv and updates all my Title Block attributes in all my drawings. (VERY sweet program) What I'm wanting to do, is create new layouts (using my dwt) based on the information in the csv file. So, when I start a new project all I need to do is create the base drawing files first. Then, in my csv file I've got those drawing names listed in Column A and their corresponding sheet titles (Layout names) in Column B. I run the lisp and it reads the csv and creates layouts in all those base drawings and naming the layouts with the sheet titles from column B.
Column A Column B
DRAWINGS SHEET TITLES
drawing1.dwg A100
drawing1.dwg A101
drawing"n".dwg "n"500
Etc, etc.
I'm needing a way to automate creating hundreds of layouts at once. (very time consuming).So the lisp has to be able to read a csv (or Excel--doesn't really matter) and create new layouts (using my dwt) in as many drawing files represented in column A. [and filtered so it doesn't create duplicates so I can run the routine at a later date when new sheets are added to the drawings] Captcha?
AutoCAD Visual LISP / AutoLISP :: Renaming Layouts According To Title Block
Mar 20, 2013I have a specific problem with renaming layouts. I found some similar lisps, but I just could not make them work.
In every layout I have following attributes.
PROJECT: 306
PHASE: RD
OBJECT: A0101
PART: EL
DRAWING: 611
ZOOM: X
REVISION: 01
I need to rename every each of layout using those attributes. Layout's name should look like that: "306_rd_A0101_el_611_x_01" . "rd", "el" and "x" must be written using lowercase.
AutoCAD Visual LISP / AutoLISP :: Apply A Page Setup To All Layouts In The Drawing
Jun 13, 2013I would like a routine that will determine if 'Page Setup A' is in the drawing and if so, apply 'Page Setup B' to all all layouts within the drawing. I would like to have it run upon drawing open in the ACAD.lsp
Basically we've changed our master page setup names, and now when a user switches to modelspace then back to paperspace the layout loses its configuration.
AutoCAD Visual LISP / AutoLISP :: Apply Page Setup To Multiple Layouts?
Nov 25, 2013Is there any way of applying a new page setup to all the layouts at once?
View 5 Replies View RelatedAutoCAD 2010 :: Using Fields In Layouts?
Jul 16, 2012When I add an object field in paperspace to report on the scale of a viewport in the layout, as I return to that layout and zoom in or out the viewport displays as hot in MS (tab reports as PS) and leaves the MS information of my previous visit embeded on the layouts neutral background and the "new" zoomed MS information is added to modelspace. The background objects cannot be selected or deleted but if I go to the block editor screen -choosing any block for my selection, when I close the block edit and return to the layout, the objects are cleared. I have installed service pack #1 for v12 and I lso have installed V13. I didn't notice this problem prior to the service pack or usin v13. I have an Intel i7 processor, 64 bit.
View 4 Replies View RelatedAutoCAD 2010 :: Copying Layouts Between Drawings?
Jun 7, 2012I have been trying to figure out how to copy a Layout from one DWG to another. I know there are several threads about this, and I have tried the methods they reccomend, but I am having an unusual problem.
I have been trying to open a Layout by using the "from Template" option for creating a new Layout, then opening the DWG containing the desired Layout. It works, but everything drawn in model space ends up compressed into the lower left corner and there is nothing in model space. So, the paper space information from the Layout is being imported, but the drawing info is getting mixed up somehow.
I have tried using the Design Center with identical results.
AutoCAD 2010 :: Import Layouts As Sheets
Jun 10, 2011When I try and import layouts as sheets, the "Prefix sheet titles with file name" is subdued. (AutoCAD MEP 2012)
View 3 Replies View RelatedAutoCAD 2010 :: Rotating Views / Layouts
Sep 14, 2012DView commands. We're using layout drawings of sites that are aligned with True North.
We've been using DView to rotate site layouts within model space in order to to align the layout better within the window and set up icons as such. And we have multiple Sheets set up with different information being displayed (ie different layers turned off). But when we go to the sheets, the Paper Space view still shows it's Original Orientation.
What I'd like to know is there a simple way to set the various different layouts to the same as Model Space, Without having to manually DView each Viewport as well?
AutoCAD 2010 :: Layouts - Creating Viewports
Jan 4, 2013I am trying to organize my drawing in model into different viewports for printing purposes. However, in Layout # 1, once I delete an item it also deletes the item in model space. In Layout # 2, can't edit, select, highlight or anything ( I am in Layer 0). How can I fix that ? Basically, I want to create several layouts, each layout will contain a certain section of my drawing in model space then. I am not "layout savvy", trying to get hang of it.
View 2 Replies View RelatedAutoCAD 2010 :: DWF To PDF - Publish Multiple Layouts
Oct 26, 2012How to use Autodesk's DWG to PDF driver to plot multiple through publish? Whenever I try to plot more than one layout at a time I get a driver not found error.
View 2 Replies View RelatedAutoCAD 2010 :: Publishing Multiple Layouts To PDF
Feb 19, 2013when I publish multiple layouts to a single pdf. When I publish all the files at one time the right side of the drawing where the title block is cut off about an inch and does not show the complete title block. Publishing to a printer as a multiple batch or publishing the layouts one at a time to pdf does not exhibit this problem.
View 2 Replies View RelatedAutoCAD 2010 :: Automating Page Layouts
Jun 21, 2013I am looking at streamlining page layout configuration. When I say this, I mean that I want there to be a button, a small msg to type into command line, or any general quick shortcut, to create a new Layout based on a specific template layout that is located on my server. There will be multiple template layouts that the user has the option to choose from when creating a new one, with each layout contianing an xref title block, and a particular size . Also, I would like these to avaiable everytime I open autoCAD, regardless of the current drawing being worked on.
I've looked at Macros and Sheet Sets, but I was wondering if there was an optium way to do something like this? I realize its a failry begginger problem but I am still a begginer at autocad.
AutoCAD 2010 :: Link Text Fields Between Layouts In Same DWG?
Feb 27, 2013Can i link several text fields to different layouts in the same DWG? I need to change the same information into several layouts, and it`s taking me too much time to do that.
eg: if i have a field "Smith" in Layout 1, 2, 3, 4 (linked between them) and i want to change from Smith to Johnson , if i change it in Layout 1, it will automatically change it in all Layouts.
AutoCAD 2010 :: Multiple Layouts In Model Space
Nov 26, 2013Multiple layouts in model space suddenly stopped showing boundaries.
View 1 Replies View RelatedAutoCAD 2010 :: Rtext Expression For Referencing Tab Layouts?
Aug 31, 2012I know I can use the expresion "$(getvar,ctab)" to reference the current layout tab name but is there a way to reference say the layout in previous or next tab in reference to the current tab. I am doing some plan and profile drawings which contain match lines I would like to have the match line text automated. For example if I'm on layout called PP02 there would be two match lines in the drawing one would read MATCH LINE PP01 and the other would read MATCH LINE PP03 I would like to automate this so the PP01 of PP02 is referencing the previous or next tab.
View 3 Replies View Related