I am looking at streamlining page layout configuration. When I say this, I mean that I want there to be a button, a small msg to type into command line, or any general quick shortcut, to create a new Layout based on a specific template layout that is located on my server. There will be multiple template layouts that the user has the option to choose from when creating a new one, with each layout contianing an xref title block, and a particular size . Also, I would like these to avaiable everytime I open autoCAD, regardless of the current drawing being worked on.
I've looked at Macros and Sheet Sets, but I was wondering if there was an optium way to do something like this? I realize its a failry begginger problem but I am still a begginer at autocad.
When I try to switch to a different layout in a drawing AutoCAD will switch to a different drawing. Then I have to go and get back to that drawing to do anything to the layout.
Okay, so I have about 25 layouts on this particular drawing that already have a default page setup assigned to them. I just created a new page setup and want to apply it to these layouts...but I cannot. I can select the right setup in the publish window but it does not stay current after publishing.
The problem also comes up if I do a "-purge" or wblock the entire drawing as to remove weird elements. The pagesetups then show as missing.
If I create a new drawing and setup the page setup for the first time AutoCAD will ask if I would like to apply to all layouts. Where is this option for existing drawings?
I would like a routine that will determine if 'Page Setup A' is in the drawing and if so, apply 'Page Setup B' to all all layouts within the drawing. I would like to have it run upon drawing open in the ACAD.lsp
Basically we've changed our master page setup names, and now when a user switches to modelspace then back to paperspace the layout loses its configuration.
When I add an object field in paperspace to report on the scale of a viewport in the layout, as I return to that layout and zoom in or out the viewport displays as hot in MS (tab reports as PS) and leaves the MS information of my previous visit embeded on the layouts neutral background and the "new" zoomed MS information is added to modelspace. The background objects cannot be selected or deleted but if I go to the block editor screen -choosing any block for my selection, when I close the block edit and return to the layout, the objects are cleared. I have installed service pack #1 for v12 and I lso have installed V13. I didn't notice this problem prior to the service pack or usin v13. I have an Intel i7 processor, 64 bit.
I have been trying to figure out how to copy a Layout from one DWG to another. I know there are several threads about this, and I have tried the methods they reccomend, but I am having an unusual problem.
I have been trying to open a Layout by using the "from Template" option for creating a new Layout, then opening the DWG containing the desired Layout. It works, but everything drawn in model space ends up compressed into the lower left corner and there is nothing in model space. So, the paper space information from the Layout is being imported, but the drawing info is getting mixed up somehow.
I have tried using the Design Center with identical results.
DView commands. We're using layout drawings of sites that are aligned with True North.
We've been using DView to rotate site layouts within model space in order to to align the layout better within the window and set up icons as such. And we have multiple Sheets set up with different information being displayed (ie different layers turned off). But when we go to the sheets, the Paper Space view still shows it's Original Orientation.
What I'd like to know is there a simple way to set the various different layouts to the same as Model Space, Without having to manually DView each Viewport as well?
I am trying to organize my drawing in model into different viewports for printing purposes. However, in Layout # 1, once I delete an item it also deletes the item in model space. In Layout # 2, can't edit, select, highlight or anything ( I am in Layer 0). How can I fix that ? Basically, I want to create several layouts, each layout will contain a certain section of my drawing in model space then. I am not "layout savvy", trying to get hang of it.
How to use Autodesk's DWG to PDF driver to plot multiple through publish? Whenever I try to plot more than one layout at a time I get a driver not found error.
when I publish multiple layouts to a single pdf. When I publish all the files at one time the right side of the drawing where the title block is cut off about an inch and does not show the complete title block. Publishing to a printer as a multiple batch or publishing the layouts one at a time to pdf does not exhibit this problem.
Can i link several text fields to different layouts in the same DWG? I need to change the same information into several layouts, and it`s taking me too much time to do that.
eg: if i have a field "Smith" in Layout 1, 2, 3, 4 (linked between them) and i want to change from Smith to Johnson , if i change it in Layout 1, it will automatically change it in all Layouts.
I know I can use the expresion "$(getvar,ctab)" to reference the current layout tab name but is there a way to reference say the layout in previous or next tab in reference to the current tab. I am doing some plan and profile drawings which contain match lines I would like to have the match line text automated. For example if I'm on layout called PP02 there would be two match lines in the drawing one would read MATCH LINE PP01 and the other would read MATCH LINE PP03 I would like to automate this so the PP01 of PP02 is referencing the previous or next tab.
Lisp that can create layouts (using a dwt--I would code in the file path to my dwt) reading data from a csv file??? I would create the drawings ahead of time, all I would need is to run the lisp and it would create all the layouts in those dwgs and name them according to the csv.
The csv file contains the drawing names in column A and the layout names in column B. So, what I want to do is create "n" number of layouts in specific dwgs, using the cell data it reads from column A--which are the drawing names, and then rename all those layouts with the cell data from B--note it would not create duplicate (existing) tabs. This way I can re-run it later to add new layouts to the drawings as needed.
The reason is that I work on projects with several hundred layouts--thus the need to create layouts more easily across as many drawings as necessary. Instead of renaming/deleting a ton of layouts; it would be easier to start with a minimal template(s) and have the lisp create the exact number of layouts we need instead of going back and making a ton of edits. Since the csv is created at the beginning of the project, any changes later (adding layouts), can easily be done by running the lisp again.
I'm trying to print out a Layout in Autocad 2012 but the edges of cylinders either go faint or disappear completely.
This happens when using both PDF and normal printers. If I look at the layout in Print Preview all the lines are there in full. Attached is the result of a PDF print.
When I work in large files (10,000 kb +) I experience significant delays when copying large amounts of information (copy a floor plan) or when switching between layouts or saving the dwg. I wish I could tell you it started right after I But I just recently started working with the larger files. So this could have been an issue from the time I bough the machine - 18 months ago.
it's either an issue with my graphics card or processor. I would like others to comment on their opinions on adjust my set-up to be more efficient
I believe I have the most current driver for the video card. Did I hear right somewhere that there is no good driver for the Quadro 4000 to work with 2012?
i have a test drawing attached with layout 1 and layout 2.
from model to layout 1 takes 2-3 seconds on my crappy computer, from model to layout 2 takes 8-10 seconds on the same crappy computer.
this sample i attached has a xref binded. which result is the same 3 and 8 seconds respectively.
you may think this is not a big deal. but layout 1 will take 10 seconds to to switch to if you have 5 xref while layout 2 will take a minute.
i did my research and haven't find the difference in variables between the two paperspace layouts.
tried all the variables made no difference:
psltscale, msltscale, celtscale, savefidelity, etc.
also set both viewoprts to undefined same thing.
the only difference is "1" is created from a blank autocad template by selecting "metric - no template", and "2" is imported from a civil 3d dwg after done a plan/profile production and that thing created that layout.
is there a tool to compare all variables between 2 layouts and find the differences? i am certain the problem lie within system variables.
Civil 3D 2012 Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2 Home: 3930k, 12GB, GTX 590, U3011, QX2710
I am attempting to draw a cable tray layout in Autocad 2010. I am very much new to Autocad.
Basically, i want to draw a cable tray on pedestals which are arranged in a rectangular area. Now, I can draw bends so that the tray stay on pedestals but my question is how to draw the tray that is equidistant from both the corners of the pedestal? There are 6 pedestals arranged in a rectangular manner. All the pedestals are of equal length and width.
I have (unfortunately) the necessity to modify into some files (which are used as models) the print style preset.
These files, which are necessary for the realization of electrical diagrams, have inside hundreds of layout.
Each layout set default printing parameters, so as "Laser b/n.pc3," as the paper size "A4" scale "Scale to Fit", and plot style "Schemi.ctb", etc. ..
Is there a way to create a macro (a field unknown to me) or something similar, to automatically change in all the default layout, for example, the printer "Colori.pc3" and the print style in "Schemi_colori.ctb "?
I have been looking at posts on automating pdf creation but have seen a lot with programming / VB involved but would like to avoid that if possible. I have also seen one's on batch processing but would like to do them as needed / completed.
I am trying to somewhat automate the pdf creation process. Having them save to a specific spot / folder and having them 'plot' the same view to the pdf would be very beneficial that way we don't have to select print, print to pdf, print this view with these details, save to this folder location. etc.
A way to print DWF files using a batch file or with a command line. We use Vault and publish all our DWF's to an external shared network folder. This is a standard feature in Vault but we now would like to reference and print those files from Baan ERP using a script. Is it possible to do this using Design Review?
I work for a company who's trying to automate the production of their mechanical and electrical cad drawings. We eventually want to integrate this into our website, so that a customer can select a few options, and a detailed drawing is generated based on what they pick.
To begin with, I'm trying to integrate AutoCAD with MS Excel. I've managed to automate in excel the options a customer can choose from. Now, the tricky part is, how can I transmit information to AutoCAD to perhaps pick blocks and strategically place them in specific locations of the drawing.
For example, if I have the option of Cats, Dogs, Elephants and Monkeys, and I have the option of quantities... 1, 2, 3, 4, 5, and I pick 3 Monkeys and 2 Cats, I want CAD to be able to place 3 monkeys and 2 cats side by side in a row.
Not sure what causes a page setup already created and previously used to not be able to be selected at a later time. When selecting it, it reverts back to <none>. Does this mean the plotter changed/is not available? The network name for the plotter did not change, but the model of the plotter changed slightly. I have the same setup saved in 100's of drawings and assumed that as long as the network name for the plotter remained the same, the setup would continue to work.
I am trying to create a border around my drawings but I'm not sure how to start. I create A3 progress drawings on a muck shift site, they are very basic but serve the purpose they have to. I would like to insert a page border to appear 10mm inside the perimeter of the page to improve the appearance.