AutoCAD 2010 :: Page Setup Not Selectable?
Oct 5, 2012
Not sure what causes a page setup already created and previously used to not be able to be selected at a later time. When selecting it, it reverts back to <none>. Does this mean the plotter changed/is not available? The network name for the plotter did not change, but the model of the plotter changed slightly. I have the same setup saved in 100's of drawings and assumed that as long as the network name for the plotter remained the same, the setup would continue to work.
View 2 Replies
ADVERTISEMENT
Mar 18, 2012
How to fix the “page setup” for all "new" dwg files?
I couldn’t know how we could customize the default plot dialogue settings that the AutoCAD provides as we click the “Plot” command.
For example, each time I start with a new dwg file and click “plot” then I got some default settings.
Then how the settings of the “plot” command can be customized such that as we start with a new dwg file then the customized settings appear?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 2 Replies
View Related
May 2, 2012
We have just upgraded from 2009 to 2012. Also have merged with a New company that did use xrefernces for there title blocks and we did, and now i am trying to solve how to use there borders to create new page layouts.
Our page setups that we had in 2009 were created by a former employee that is longer with the company.
How we typically started a border/ sheet. We have a separate drawing file that has in model space a 24x36 border with our info that we want repeated on all our sheets.
Now that we are in 2012; The layout tap is a weird size and the 'layout black area' does not match when I import that 24x36 boarder file. The black area does not line up with "0,0,0" and that is what I and trying to figure out how to i make the black area of the layout start at 0,0,0 and be 24x36.
the picture i attached shows 0,0,0 and the 2 borders over layed.
the green box is 24x36.
the blue box is the new border which is ment to be sent within the 24x36 and the brownish red box is the old border and layout and what we used to use.
View 1 Replies
View Related
Mar 21, 2013
I am just installed AutoCAD 2010 on Windows 7 (both 64-bit). There is a problem with the Page Setup Manager. When I select any of the page setup tabs, then select "modify" or even "new", the program crashes. Same things happens when I gain access to the Page Set Up Manager through the menu. . Page Manager hasn't ever worked. Update 2 is installed. I have repaired and reinstalled, and tried all again just now. There is no error message beyond "not responding" in parentheses next to name of dialogue box. The screen grays out and stays that way. Then the screen becomes shaded with the whirling aqua ring and it's all over. Control + P and plot causes the system to crash as well.
View 9 Replies
View Related
Jan 25, 2013
I have a copy machine that staples automatically but i dont want it to staple all the time. I made two page setups 1 called toshiba 11x17 and one called 11x17 stapled. However every time i go into the properties for them whatever i do to one effects the other. I just want one to be stapled one to not be stapled and everything else to be identical.
View 1 Replies
View Related
Sep 7, 2012
I am working on an AutoCad drawing (Vers. 2013) that I got from someone else. I am setting up my drawing and right clicked my sheet tab as usual to go to the page set up manager. I set up my printer, ctb, paper size etc. But when I try to set my plot size to 1:1 it won't retain it and reverts to 1"=1'. It will however let me switch to anything other than to 1;1 (ie 1:10). I checked some existing drawings and the problem doesn't show up. So it's just this particular drawing that's messed up. I checked my drawing units and drawing setup commands and they are the same as I always use.
So the question is why won't let me use a plot size of 1:1?
View 9 Replies
View Related
Nov 1, 2013
I need to modify the page setup of multple drawings and have it save that way so everytime I open the drawing the chosen page setup is selected.
I'm aware of being able to set multiple page setups in the publish screen, but that isnt a permenant change to the drawings themselves, and not what I'm looking for.
View 5 Replies
View Related
Nov 14, 2012
Without our office, we set up Sheet Sets for every set of drawings we produce, and we setup Page Setup Overrides specific to those drawings from which we can print. We may setup one for printing fullsize PDFs, another for in-house half-size plots, and another for 11x17 printing. The Overrides are saved on our office network.
We've been having an issue where the plotter(s) in the various Overrides won't work initially when someone other than the creator is printing. That person will have to open up the 'Manage Page Setup Overrides' tab, select 'Modify' for the Override they wish to change, and select the plotter to use in that Override (the plotter always defaults to 'None'). They can publish from that particular drawing set just fine until someone else in the office needs to print using an Override, in which case they go through the same procedure listed above.
We're using network printers only, and we've verified that the printer names, ports, etc. are all the same between the various computers, so different naming or port selection doesn't seem to be an issue.
View 6 Replies
View Related
Feb 1, 2012
Using Acad 2010
Is there a way to remove the *Model* page setup entry from the list of Page Setups in the Page Setup Manager? This is the first time I am seeing *Model* in the list, and I suspect that it the reason I am not able to generate a PDF for this particular drawing. When I try, I get the following error:
=========================
Job: - Error(s) Did Not Plot
Job ID: 5
Sheet set name:
Date and time started: 2/1/2012 10:34:53 AM
Date and time completed: 2/1/2012 10:34:54 AM
UserID: AchrisK
Profile ID:
Total sheets: 1
Sheets plotted: 0
Number of errors: 1
Number of warnings: 0
Sheet: 123456-Model - Error(s) Did Not Plot
File: C:Drawings123456.dwg
Category name:
Page setup:
Device name:
Plot file path:
Paper size:
ERROR: Internal Error: Failed to get Plot Settings Dictionary.
==================================================
I have this idea that removing *Model* from the list will do it. In addition to causing PDF creation failure, I believe it is also responsible for forcing the Model to always be in the Publish list, even though I have unchecked the "Include model when adding sheets" option. I can remove it from that list manually, but it comes back every time.
View 8 Replies
View Related
May 6, 2013
I am guessing this will be a no but is there a way to change page setup for more than 1 page at a time? I have multiple pages in a drawing that I want to change to all the same page setup.
View 3 Replies
View Related
Apr 1, 2014
Trying to set up a datamerge file to create multi page spread documents with fields on different pages. Attempting to set it up so it's as automated as possible as there are up to 20 different merge documents needing to merge with up to 100 different csv records from the same file each week . The merge documents have different and repeated merge fields on most pages.
I've set it up so that the document has facing pages, and most pages have images spread across the whole of the spread. the pages preview fine, they are created ok when using 'Create Merged Document' although the page numbers continue from one document to another (another problem). but when I come to export to pdf, then the merge only shows the image on the left spread but on both left and right spread single pages, and the page numbers don't show the correct page numbers eg it will go p1 p2 p1 p2 etc all the way through the document instead of p1 p2 p3 - p20 etc. I don't want to have to merge first then pdf but can't understand why the images and page numbers are not showing correctly.
View 2 Replies
View Related
May 12, 2013
We currently have a drawing with several thousand groups. For some reason (I think it's got to do with copy and pasting) there are a lot of groups which are not selectable anymore. I know I can use the grouping dialogue to turn unselectable groups to selectable. However, as I mentioned, there are several thousand groups to filter through.
Is there a way to gobally change all group properties to selectable?
View 8 Replies
View Related
Jun 9, 2011
How do I add a new Pagesetup in VB.NET?I know I need the Plot.Settings class and I add it to the Drawing database. How to get started with the code and/or correct object?
View 3 Replies
View Related
Aug 6, 2009
I have made gridlines and put them on a locked layer. I want to be able to see them and snap to them, but I don't want to select them. Their selectability is hindering my ability to select objects on other layers. Is there any way to make lines on locked layers not selectable? (I don't like the Autocad standard grid.)
View 9 Replies
View Related
May 17, 2013
When working in paperspace existing or new layout viewports are non-selectable. The viewport boundary is not visible and all layers are turned on and thawed. Is there some sort of toggle to make viewport boundarys visible and selectable?
View 6 Replies
View Related
Feb 25, 2013
I have existing .NET code that adds page setups to drawings. I now wanted to set the newly added page setup as "current" within the drawing.
The "manual" way to do what I am asking is by clicking the "Set Current" button from within the Page Setup Manager dialog. How would I do this programmatically?
View 3 Replies
View Related
Aug 22, 2013
I found an old 2008 post about "removing page setup from several hundred drawings all at the same time?" and the answer was "No".
But is there a way to do it in a single dwg ?
I'd like to make a button with a script behind to delete all existing page setup... in 2013LT
View 9 Replies
View Related
Dec 18, 2013
I'm trying to find a setting which allows me to produce pdf copies of AC LT 2014 layouts that do not require rotation to view them in Adobe.
I've searched all through the pdf settings and still I have to rotate the pdf counterclockwise to view it in its correct orientation.
There's a setting which works for MS Office documents in the pdf options section but when this is applied in ACAD it doesn't work and I still have to rotate the view.
View 7 Replies
View Related
Dec 17, 2013
I am trying, in vane, to batch plot multiple dwg files to pdf's.
I have a pdf reader/writer (Bluebeam Extreme), but the plugin will not work (I have sent an email to Bluebeam to see if hey can sort it out).
So, I tried using the batchplot, but kept getting stuck when I had added multiple dwg's, using Publish, and then tried to change the page setup by right-clicking the files. The new page setup I had just created wass not available, apart from the dwg I created it in.
I hadn't notcied until now, as I usually use the Previous Plot dropdown when plotting, but whenever I create a new Page Setup, it is no longer in the dropdown combo box whenever I open up a new file, or even in the file I created it in if I close it down and reopen.
I am using AutoCAD LT 2010 with Windows 7 Professional, 32 Bit.
View 2 Replies
View Related
May 16, 2013
Using Autocad 2011. If I pick an object, any object, in an old drawing, or newly created drawing, I cannot change it's color in the Quick Properties dialog box. "Color" is grayed out, and not selectable. I can change it via the pulldown in the Layer Manager on my toolbar, but not in the Quick Properties dialog. This just started happening.
View 9 Replies
View Related
Jul 18, 2012
I just gave one of my drafters a new PC with AutoCAD 2013 and 2012 on it. We migrated the settings from her old pc with with 2012 to the new PC. All settings are correct except for the plotter. She had custom page setup that was used on all her drawings and that did not transfer. We setup a new one with the same settings but that requires us to reapply to every drawing.
Isn't there an easy way to do transfer these settings? If we choose the page setup most of the time it just goes back to none and a lot of the time it isn't even an option.
View 9 Replies
View Related
May 1, 2013
My drawings typically have 5-10 pages(layouts). The page setup on the layouts have the printer name set to my printer in my office. So I can pulish all layouts and print them all at once. I would like to be able to send these drawings to others with different printers and have them be able to print all layouts at once without going and and changing page setups or anything like that, its mostly non autocad people. How can I set this up?
View 8 Replies
View Related
Nov 4, 2011
we recently changed the printer we use for 11x17 drawings. Is there a quick way to mass import the new page setup? Or something else quicker and easier than going into each drawing and importing the new page setup one at a time?
View 1 Replies
View Related
Mar 3, 2013
I have just downloaded the 3 year trial of AutoCAD for students. I have managed to create a floor plan but struggling to amend the layout. First of all, I would like the page setup to be A3 but that is not an option on my Page Setup Manager as it will only connect to my printer size.
I am also trying to add a Title Block but again do not know what I am doing, or where to download template ones for free?
View 1 Replies
View Related
Jun 27, 2011
I'm trying to plot a set of drawings that need to be set at 1:1. Every time I pick Custom or 1:1 and set it to 1mm = 1unit, AutoCAD immediately switches it to whatever 1:1_6 is, leaving me with a bunch of empty space around all my viewports.
I'm fairly new at using paper space, and I've never used a plot scale that have underscores in them, so I don't even know what they're representing.
View 9 Replies
View Related
Nov 9, 2012
I want to setup two different page setup for one file. For example, when I type publish command, I want to have option of either selecting pdf or selecting actual printer.
View 3 Replies
View Related
Apr 26, 2012
When I purge a drawing, the text styles are not a selectable option (as if there are no purgeable text styles). if i use (-purge), it will purge the unused text styles. I can also go into the Styles dialog box and delete the styles. It happens in all drawings and nobody else in the dept has the problem. I can't find any settings that would exclude any items from the purge dialog box as well. Autocad 2012? windows 7 64 bit.
View 1 Replies
View Related
Jan 11, 2013
getting consistent crash when clicking on "new" in page setup manager dialog box.
Happens regardless of which drawing is open. Even for new blank drawings.This prevents me from creating new pagesetup overrides for Publishing. MAJOR PROBLEM.
At this point I have to get other people in the office to create new page setup for me. Editing existing page setups works find, only the "new" setups are a problem.
AutoCAD 2013 (G.114.0.0 SP 1.1), Windows 7.
Also, AutoCAD internal crash reporter is not called. Goes direct to Win 7, "Application has stop working" dialog.
View 4 Replies
View Related
Jul 11, 2013
I have created a bunch of Page Setups (for both Paper and PDF) that work great when plotting from the plot menu. Lately, I've convinced my people to start using the sheet set manager and the publish command. However, on some computers, (not mine) plotting (to PDF) from the Publish dialog box outputs a file that seems to ignore the page setup. Using the very same Page Setup, the file comes out perfectly when plotting from the regular Plot menu. I don't understand how:
1- I get the same result with both methods on my computer (the one used to create all those page setups);
2- I get page setup to apply perfectly on my computer;
3- I get the expected result on the problematic computers when using Plot;
4- But I get different results on the problematic computer when using Publish.
*Note: In the publish dialog box, I use "Publish to: Plotter named in page setup" and then I select the wanted page setup for all my selected layouts in the list. My page setups are using "DWG to PDF.pc3", so the "plotter named in page setup" in all cases should be "DWG to PDF".
I've been doing tests with PDF files set on A1 format (841mmX594mm) and the output is perfect on my computer. Then on another computer, strangely, I get a PDF with these dimensions: 863.6mmX558.8mm (34"x22"). On the second computer, doing the very same steps, I get 431.8mmX279.4mm (17"x11"). Three computers, three different outputs with three different values. One works, two miss. I'm stoked.
Keep in mind that all three computers output perfect files when using the standard plotting menu (using the same page setups) so I doubt the page setups are incorrect. Does the Publish command deal differently with page setups than the plot command ? I would have assumed that both commands would react the same. I 'd like my team to be able to batch plot like I can on my computer.
View 3 Replies
View Related
Aug 12, 2013
System Autocad 2013 on PC 32bit
Our company as a .ctb file that has been in use for some time. I have upgraded to 2013 and now...
When I open up old files that contain sheets and page setup.
If I attempt to "Modify" or "Create New" Page setup "Page Setup Manager" goes into lock down and freezes everything.
I am unable to change the setup to re-assign the proper .ctb.
I checked with a new document and I am able to access and use the right .ctb.
This is duplicated on everyone of the machines in our office that has 2013 running on PC.
The one machine with Autocad for Mac 2013 works just fine.
right now we out of four computer, we only have one computer running 2008 that do any printing or PDF'ing.
I tried changing the .CTB to an .STB, with no success. Changing the color space does not appear to work.
Is there a problem with my .ctb file that makes it not compatible with 2013?
View 5 Replies
View Related
Jun 15, 2012
With ACDLT2010 is there a way to create 1 page setup and force it with one command to all SHEETS (Paper Space) or Multiple Files Model's prior to Batch Plotting a Project?
Reason i ask, is i regularly get files from other contractors, and they use different aspect ratio's / paper sizes / blah bleh blah. Manually going through and changing all the settings is time consuming and would be much easier if i can just pull up a list of drawing's and force a page setup to all pages.
View 6 Replies
View Related
