AutoCad :: Remove Model Page Setup Entry From List Of Page Setups
Feb 1, 2012
Using Acad 2010
Is there a way to remove the *Model* page setup entry from the list of Page Setups in the Page Setup Manager? This is the first time I am seeing *Model* in the list, and I suspect that it the reason I am not able to generate a PDF for this particular drawing. When I try, I get the following error:
=========================
Job: - Error(s) Did Not Plot
Job ID: 5
Sheet set name:
Date and time started: 2/1/2012 10:34:53 AM
Date and time completed: 2/1/2012 10:34:54 AM
UserID: AchrisK
Profile ID:
Total sheets: 1
Sheets plotted: 0
Number of errors: 1
Number of warnings: 0
ERROR: Internal Error: Failed to get Plot Settings Dictionary.
==================================================
I have this idea that removing *Model* from the list will do it. In addition to causing PDF creation failure, I believe it is also responsible for forcing the Model to always be in the Publish list, even though I have unchecked the "Include model when adding sheets" option. I can remove it from that list manually, but it comes back every time.
I have a copy machine that staples automatically but i dont want it to staple all the time. I made two page setups 1 called toshiba 11x17 and one called 11x17 stapled. However every time i go into the properties for them whatever i do to one effects the other. I just want one to be stapled one to not be stapled and everything else to be identical.
I found a function on JTBWorld named listPageSetups, which appears to be meant for listing the pagesetups that exist in an "open" dwg file (as I can get it work for the current dwg). So,
(1) Can this function be used to list page setups in another, un-opened dwg, and, if so, how?
(2) If the answer to (1) is No, is there a LISP way to get a list of page setups from another, un-opened dwg?
I am guessing this will be a no but is there a way to change page setup for more than 1 page at a time? I have multiple pages in a drawing that I want to change to all the same page setup.
Trying to set up a datamerge file to create multi page spread documents with fields on different pages. Attempting to set it up so it's as automated as possible as there are up to 20 different merge documents needing to merge with up to 100 different csv records from the same file each week . The merge documents have different and repeated merge fields on most pages.
I've set it up so that the document has facing pages, and most pages have images spread across the whole of the spread. the pages preview fine, they are created ok when using 'Create Merged Document' although the page numbers continue from one document to another (another problem). but when I come to export to pdf, then the merge only shows the image on the left spread but on both left and right spread single pages, and the page numbers don't show the correct page numbers eg it will go p1 p2 p1 p2 etc all the way through the document instead of p1 p2 p3 - p20 etc. I don't want to have to merge first then pdf but can't understand why the images and page numbers are not showing correctly.
I am trying to import a page setup into the active drawing; the code works fine but I get an error when trying to save the file: Error writing/closing file. I've attached the code. I need to run the code in batch mode. I've tried different ways of saving but I get the same error.
I've tried in a few different files now to import some sheet file (paper space) layouts from other files and it is just giving me a blank screen once I choose the file to import from. The paper space layouts aren't showing up to choose from, if that makes any sense. It has been awhile since I've had to do this, so admittedly could be doing something wrong, but I don't think so as I've searched but found none.
I'm right clicking on the paper space tab and choosing "Page setup manager" then "import", finding the file I want to import from and then the next box pops up with what is supposed to be the layouts to choose from but it's blank.
I have quite a few thousand of drawings that each has a different page setup saved in them. What I would like to do is to remove all of these pageset ups from these drawings, import a newly one, set it to current and then save the file for later printing. Maybe some lisp file that can accomplish this.
Any Lisp routine available out there that will import a page setup in multiple drawings in one shot and save it to the group of drawings? Kind of the way you can import a page setup in a group of drawings in Publish, but that's only temporary for that particular print job. I'm looking for something that will permanently save it to the list of drawings.
how to create page setups for multiple printers in a network environment?
Here is the problem:
We have 2 offices with 3-7 printers per office and each printer with different capabilities (black and white, color, 11x17, wide format, etc.). I have CAD users who know little about setting up layouts so I want to create preconfigured layouts that they can import from a template via Design Center or other means.
I know I could set up a layout for each printer, page size, plot scale, and plot style table, but that gets to be so many layout permutations that it becomes overwhelming to manage and use. Up until now I had set up PC3 files for a few commonly used printers (wide format plotter, laser, pdf) and gave them generic names with the intent that I could simply direct the output to any printer by assigning it to one of the generic PC3 files. The problem I've encountered is that over time we've acquired new printers and old printers sometimes go offline or out of service and many of the printers have incompatible printable areas and page sizes to each other, so for example a page setup that calls for an 11x17 sheet for one printer does not have an equivalent size when a different printer is assigned to the layout.
Are we stuck with having to configure setups for each and every printer and permutation?
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1 WIN 7 64 PRO HP Pavillion h8xt, i7 2600, 12 GB RADEON 6450, 1 GB
I have recently been using Sheet Set Managers (SSM) more recently and have found them quite handy but I am also finding some peculiarities with it too. I have no issues setting up a SSM and getting it to plot all my sheets either to our plotter or to PDF at full size (24x36), however when it comes to setting up a half size (11x17) page setup and overriding to it, is where problems occur.
What I want is a page setup that I can select that will plot 11x17 from 24x36. So, I first created a page setup that does this in our template (.dwt) and then set the page setup overrides file to our template file (under sheet set properties). Next I right-cliked on my sheet set and went to "Publish" and then "Publishing Using Page Setup Override", but the list it populated for me did not reflect all of the page setups we have in our template??? It listed two page steups _24x36 and _30x42 (see attachment). These page setups can be found in our template under page setup manager along with several others which don't show in the overrides (see attachment).
Is there a reason the other page setups aren't coming up in the SSM overrides menu?
Once upon a time in a job far, far away I had a lisp routine that deleted the current page setups and replaced them with new ones imported from a template drawing. It's probably been a good 6-7 years since I found it the first time.
We have, since moving to 2012 had an issue with our standard Named Page Setups in our DWT file staying assigned to the layout tabs. When you click up to plot a dwg... the Page Setup Name indicating that the Named Page Setup assigned to the plot configuration dialog box says <None>. Even if you click in the drop down and select a setup... the name selected shows as selected after the box colapses... but then a split second later, the box defaults back to <None>.
How do I add a new Pagesetup in VB.NET?I know I need the Plot.Settings class and I add it to the Drawing database. How to get started with the code and/or correct object?
I have existing .NET code that adds page setups to drawings. I now wanted to set the newly added page setup as "current" within the drawing.
The "manual" way to do what I am asking is by clicking the "Set Current" button from within the Page Setup Manager dialog. How would I do this programmatically?
I'm trying to find a setting which allows me to produce pdf copies of AC LT 2014 layouts that do not require rotation to view them in Adobe.
I've searched all through the pdf settings and still I have to rotate the pdf counterclockwise to view it in its correct orientation.
There's a setting which works for MS Office documents in the pdf options section but when this is applied in ACAD it doesn't work and I still have to rotate the view.
I am trying, in vane, to batch plot multiple dwg files to pdf's.
I have a pdf reader/writer (Bluebeam Extreme), but the plugin will not work (I have sent an email to Bluebeam to see if hey can sort it out).
So, I tried using the batchplot, but kept getting stuck when I had added multiple dwg's, using Publish, and then tried to change the page setup by right-clicking the files. The new page setup I had just created wass not available, apart from the dwg I created it in.
I hadn't notcied until now, as I usually use the Previous Plot dropdown when plotting, but whenever I create a new Page Setup, it is no longer in the dropdown combo box whenever I open up a new file, or even in the file I created it in if I close it down and reopen.
I am using AutoCAD LT 2010 with Windows 7 Professional, 32 Bit.
Not sure what causes a page setup already created and previously used to not be able to be selected at a later time. When selecting it, it reverts back to <none>. Does this mean the plotter changed/is not available? The network name for the plotter did not change, but the model of the plotter changed slightly. I have the same setup saved in 100's of drawings and assumed that as long as the network name for the plotter remained the same, the setup would continue to work.
I just gave one of my drafters a new PC with AutoCAD 2013 and 2012 on it. We migrated the settings from her old pc with with 2012 to the new PC. All settings are correct except for the plotter. She had custom page setup that was used on all her drawings and that did not transfer. We setup a new one with the same settings but that requires us to reapply to every drawing.
Isn't there an easy way to do transfer these settings? If we choose the page setup most of the time it just goes back to none and a lot of the time it isn't even an option.
My drawings typically have 5-10 pages(layouts). The page setup on the layouts have the printer name set to my printer in my office. So I can pulish all layouts and print them all at once. I would like to be able to send these drawings to others with different printers and have them be able to print all layouts at once without going and and changing page setups or anything like that, its mostly non autocad people. How can I set this up?
we recently changed the printer we use for 11x17 drawings. Is there a quick way to mass import the new page setup? Or something else quicker and easier than going into each drawing and importing the new page setup one at a time?
I have just downloaded the 3 year trial of AutoCAD for students. I have managed to create a floor plan but struggling to amend the layout. First of all, I would like the page setup to be A3 but that is not an option on my Page Setup Manager as it will only connect to my printer size.
I am also trying to add a Title Block but again do not know what I am doing, or where to download template ones for free?
I'm trying to plot a set of drawings that need to be set at 1:1. Every time I pick Custom or 1:1 and set it to 1mm = 1unit, AutoCAD immediately switches it to whatever 1:1_6 is, leaving me with a bunch of empty space around all my viewports.
I'm fairly new at using paper space, and I've never used a plot scale that have underscores in them, so I don't even know what they're representing.
I want to setup two different page setup for one file. For example, when I type publish command, I want to have option of either selecting pdf or selecting actual printer.
getting consistent crash when clicking on "new" in page setup manager dialog box.
Happens regardless of which drawing is open. Even for new blank drawings.This prevents me from creating new pagesetup overrides for Publishing. MAJOR PROBLEM.
At this point I have to get other people in the office to create new page setup for me. Editing existing page setups works find, only the "new" setups are a problem.
AutoCAD 2013 (G.114.0.0 SP 1.1), Windows 7.
Also, AutoCAD internal crash reporter is not called. Goes direct to Win 7, "Application has stop working" dialog.
I have created a bunch of Page Setups (for both Paper and PDF) that work great when plotting from the plot menu. Lately, I've convinced my people to start using the sheet set manager and the publish command. However, on some computers, (not mine) plotting (to PDF) from the Publish dialog box outputs a file that seems to ignore the page setup. Using the very same Page Setup, the file comes out perfectly when plotting from the regular Plot menu. I don't understand how:
1- I get the same result with both methods on my computer (the one used to create all those page setups); 2- I get page setup to apply perfectly on my computer; 3- I get the expected result on the problematic computers when using Plot; 4- But I get different results on the problematic computer when using Publish.
*Note: In the publish dialog box, I use "Publish to: Plotter named in page setup" and then I select the wanted page setup for all my selected layouts in the list. My page setups are using "DWG to PDF.pc3", so the "plotter named in page setup" in all cases should be "DWG to PDF".
I've been doing tests with PDF files set on A1 format (841mmX594mm) and the output is perfect on my computer. Then on another computer, strangely, I get a PDF with these dimensions: 863.6mmX558.8mm (34"x22"). On the second computer, doing the very same steps, I get 431.8mmX279.4mm (17"x11"). Three computers, three different outputs with three different values. One works, two miss. I'm stoked.
Keep in mind that all three computers output perfect files when using the standard plotting menu (using the same page setups) so I doubt the page setups are incorrect. Does the Publish command deal differently with page setups than the plot command ? I would have assumed that both commands would react the same. I 'd like my team to be able to batch plot like I can on my computer.
We have just upgraded from 2009 to 2012. Also have merged with a New company that did use xrefernces for there title blocks and we did, and now i am trying to solve how to use there borders to create new page layouts.
Our page setups that we had in 2009 were created by a former employee that is longer with the company.
How we typically started a border/ sheet. We have a separate drawing file that has in model space a 24x36 border with our info that we want repeated on all our sheets.
Now that we are in 2012; The layout tap is a weird size and the 'layout black area' does not match when I import that 24x36 boarder file. The black area does not line up with "0,0,0" and that is what I and trying to figure out how to i make the black area of the layout start at 0,0,0 and be 24x36.
the picture i attached shows 0,0,0 and the 2 borders over layed.
the green box is 24x36.
the blue box is the new border which is ment to be sent within the 24x36 and the brownish red box is the old border and layout and what we used to use.
I am just installed AutoCAD 2010 on Windows 7 (both 64-bit). There is a problem with the Page Setup Manager. When I select any of the page setup tabs, then select "modify" or even "new", the program crashes. Same things happens when I gain access to the Page Set Up Manager through the menu. . Page Manager hasn't ever worked. Update 2 is installed. I have repaired and reinstalled, and tried all again just now. There is no error message beyond "not responding" in parentheses next to name of dialogue box. The screen grays out and stays that way. Then the screen becomes shaded with the whirling aqua ring and it's all over. Control + P and plot causes the system to crash as well.
