I am trying to import a page setup into the active drawing; the code works fine but I get an error when trying to save the file: Error writing/closing file. I've attached the code. I need to run the code in batch mode. I've tried different ways of saving but I get the same error.
View 3 RepliesUsing Acad 2010
Is there a way to remove the *Model* page setup entry from the list of Page Setups in the Page Setup Manager? This is the first time I am seeing *Model* in the list, and I suspect that it the reason I am not able to generate a PDF for this particular drawing. When I try, I get the following error:
=========================
Job: - Error(s) Did Not Plot
Job ID: 5
Sheet set name:
Date and time started: 2/1/2012 10:34:53 AM
Date and time completed: 2/1/2012 10:34:54 AM
UserID: AchrisK
Profile ID:
Total sheets: 1
Sheets plotted: 0
Number of errors: 1
Number of warnings: 0
Sheet: 123456-Model - Error(s) Did Not Plot
File: C:Drawings123456.dwg
Category name:
Page setup:
Device name:
Plot file path:
Paper size:
ERROR: Internal Error: Failed to get Plot Settings Dictionary.
==================================================
I have this idea that removing *Model* from the list will do it. In addition to causing PDF creation failure, I believe it is also responsible for forcing the Model to always be in the Publish list, even though I have unchecked the "Include model when adding sheets" option. I can remove it from that list manually, but it comes back every time.
I've tried in a few different files now to import some sheet file (paper space) layouts from other files and it is just giving me a blank screen once I choose the file to import from. The paper space layouts aren't showing up to choose from, if that makes any sense. It has been awhile since I've had to do this, so admittedly could be doing something wrong, but I don't think so as I've searched but found none.
I'm right clicking on the paper space tab and choosing "Page setup manager" then "import", finding the file I want to import from and then the next box pops up with what is supposed to be the layouts to choose from but it's blank.
I have quite a few thousand of drawings that each has a different page setup saved in them. What I would like to do is to remove all of these pageset ups from these drawings, import a newly one, set it to current and then save the file for later printing. Maybe some lisp file that can accomplish this.
View 8 Replies View RelatedIs it possible to purge page setups from the plot dialog?
ACA2011
Win7-64
I have a copy machine that staples automatically but i dont want it to staple all the time. I made two page setups 1 called toshiba 11x17 and one called 11x17 stapled. However every time i go into the properties for them whatever i do to one effects the other. I just want one to be stapled one to not be stapled and everything else to be identical.
View 1 Replies View RelatedAny Lisp routine available out there that will import a page setup in multiple drawings in one shot and save it to the group of drawings? Kind of the way you can import a page setup in a group of drawings in Publish, but that's only temporary for that particular print job. I'm looking for something that will permanently save it to the list of drawings.
View 1 Replies View Relatedhow to create page setups for multiple printers in a network environment?
Here is the problem:
We have 2 offices with 3-7 printers per office and each printer with different capabilities (black and white, color, 11x17, wide format, etc.). I have CAD users who know little about setting up layouts so I want to create preconfigured layouts that they can import from a template via Design Center or other means.
I know I could set up a layout for each printer, page size, plot scale, and plot style table, but that gets to be so many layout permutations that it becomes overwhelming to manage and use. Up until now I had set up PC3 files for a few commonly used printers (wide format plotter, laser, pdf) and gave them generic names with the intent that I could simply direct the output to any printer by assigning it to one of the generic PC3 files. The problem I've encountered is that over time we've acquired new printers and old printers sometimes go offline or out of service and many of the printers have incompatible printable areas and page sizes to each other, so for example a page setup that calls for an 11x17 sheet for one printer does not have an equivalent size when a different printer is assigned to the layout.
Are we stuck with having to configure setups for each and every printer and permutation?
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
I found a function on JTBWorld named listPageSetups, which appears to be meant for listing the pagesetups that exist in an "open" dwg file (as I can get it work for the current dwg). So,
(1) Can this function be used to list page setups in another, un-opened dwg, and, if so, how?
(2) If the answer to (1) is No, is there a LISP way to get a list of page setups from another, un-opened dwg?
I have recently been using Sheet Set Managers (SSM) more recently and have found them quite handy but I am also finding some peculiarities with it too. I have no issues setting up a SSM and getting it to plot all my sheets either to our plotter or to PDF at full size (24x36), however when it comes to setting up a half size (11x17) page setup and overriding to it, is where problems occur.
What I want is a page setup that I can select that will plot 11x17 from 24x36. So, I first created a page setup that does this in our template (.dwt) and then set the page setup overrides file to our template file (under sheet set properties). Next I right-cliked on my sheet set and went to "Publish" and then "Publishing Using Page Setup Override", but the list it populated for me did not reflect all of the page setups we have in our template??? It listed two page steups _24x36 and _30x42 (see attachment). These page setups can be found in our template under page setup manager along with several others which don't show in the overrides (see attachment).
Is there a reason the other page setups aren't coming up in the SSM overrides menu?
Once upon a time in a job far, far away I had a lisp routine that deleted the current page setups and replaced them with new ones imported from a template drawing. It's probably been a good 6-7 years since I found it the first time.
View 2 Replies View RelatedWe have, since moving to 2012 had an issue with our standard Named Page Setups in our DWT file staying assigned to the layout tabs. When you click up to plot a dwg... the Page Setup Name indicating that the Named Page Setup assigned to the plot configuration dialog box says <None>. Even if you click in the drop down and select a setup... the name selected shows as selected after the box colapses... but then a split second later, the box defaults back to <None>.
View 2 Replies View RelatedIs there a way to save and/or open Action setups separate from CFX setups?
Is there a simple way to export objects, axis, or lights to FBX files? Obviously, the FBX camera node can export a camera but it would be useful to export an axis as a locator, at the least.
we recently changed the printer we use for 11x17 drawings. Is there a quick way to mass import the new page setup? Or something else quicker and easier than going into each drawing and importing the new page setup one at a time?
View 1 Replies View RelatedI know that if I use IMPORTOBJ I can import an excel file....but the file is multiple pages (within the same workbook page). Is there a way to bring that in withought breaking up the Excel file into mulitple files?
View 1 Replies View RelatedHave several pages that I'd like to copy to a new drawing file. I care about paper space info. Not concerned with model space or view ports.
View 6 Replies View RelatedI have been using until saturday Windows Vista and Autocad 2008, with out any problem, at least that windows vista was slowly.
So I decide to upgrade my notebook and I add windows 7 - 64 bit and change my autocad to a 2010 version for this windows 7 as well.
The acrobat is the 8 version.
The problem is the following:
I was able to work normally with this soft, but when I need to plot in PDF a drawing bigger than A0 page, it does not plot. If I add an A0 it works fine. Then I went to properties, change the page to a PostScript, and change paper size to 2100 mm in height and width, but anyway It still dont work.
Is there anything I must set before ploting a bigger size page, with the new Autocad 2010 or with windows 7??
I'm going to take the computer home tonight so that I can set up as many drawing templates that I will conceivable need at work.
Are there any special ways to go about this or CAD standards that I should observe?
I mostly use A3 and A4 paper for architectural metric drawings.
Is it worth making me own templates so that I can just jump into future drawings or is it better to download templates from the internet?
Is there some way in an Inventor idw drawing to 'hide' a page. I have created an extra page with information for future changes but do not want it to printed or be counted in the total number of sheets.
View 1 Replies View RelatedI want to setup two different page setup for one file. For example, when I type publish command, I want to have option of either selecting pdf or selecting actual printer.
View 3 Replies View RelatedI have change the orientation of my layout,the whole drawing is out of page ,How to set it?
View 9 Replies View RelatedI've got a very long narrow site where more of it would be better shown and printed on a vertical page. However all the default and custom viewports are designed specifically for horizontal pages. How can a page be rotated to be plotted vertically?
View 4 Replies View RelatedStarted producing a new catalogue some time ago very happy working away on the first 3 – 4 pages
Before long I was up to 100 pages, looking fantastic. But then the thought come to me, I have set may page colour to BLACK and all my drawing and text are WHITE as I said looks fantastic until you go to print a page. How much black Ink would you use printing 100 pages black.
SO MY QUESTION IS CAN COREL REVERSE THE LINE ART TO BLACK AND THE PAGE TO WHITE SO I CAN HAVE A PRINTABLE VERSION ?
I have tried publishing to PDF then in acrobat replacing document colours and on screen that works fine but when you print it still prints
With the black background and white text for some reason.
I have lost my toolbars for drawing and modify at the top of the page. How do i get them back.
View 3 Replies View RelatedI use inventor to draw cars for competitions. They are made from 2x2x12 balsa wood blocks.
Is there a way to center the drawing directly in the middle of the page?
What type of file would i need to model the car in in order to have it cut out using a cnc router/five axis mill? Would it be the same for wheels (made out of 2mm plastic)?
When I try to plot my drawing, my drawing only takes up 2/3 of the page on print preview. The top half of the page is blank. How can I make my drawing take up the whole available page?
View 9 Replies View RelatedHow I set Linetype scale for 3 paper space with different page setup with in single drawing.
Explanation:I have a drawing with XRef attached, I want to make 3 paper space for this drawing with different page setup A0, A1 and A3. I am confused how I set line type scale for each paper space.
Is there a way to bring in a pdf, and have more than one page show up.
View 3 Replies View RelatedIs it possible to import my existing webpages I have saved on my PC. I want to re-design them and make a few changes etc. I only seem to be able to import the images from a page. Am I being dim or is this simply done? I am using Designer Pro 6
View 4 Replies View RelatedI would like a routine that will determine if 'Page Setup A' is in the drawing and if so, apply 'Page Setup B' to all all layouts within the drawing. I would like to have it run upon drawing open in the ACAD.lsp
Basically we've changed our master page setup names, and now when a user switches to modelspace then back to paperspace the layout loses its configuration.
if it's possible to move brushes and other setups I've done in CS3 to CS4 once I upgrade. I've tried several ways of searching to see if this has been asked before but I didn't find anything.
View 8 Replies View Related