I am trying to plot a drawing on a tabloid sheet. I don't remember how to do so.Heres is what I have tried:
I went to "Page Setup Manager" in the options from right clicking on the Layout tab and then went to modify. From there I chose my Paper Size as "ANSI B (17x11 Inches). Then from the "What to plot" tab I chose extents and when I preview the print it doesn't incorporate the whole drawing, but only a portion of it. It does the same thing if I choose the other options (window, layout, etc...).
I am just installed AutoCAD 2010 on Windows 7 (both 64-bit). There is a problem with the Page Setup Manager. When I select any of the page setup tabs, then select "modify" or even "new", the program crashes. Same things happens when I gain access to the Page Set Up Manager through the menu. . Page Manager hasn't ever worked. Update 2 is installed. I have repaired and reinstalled, and tried all again just now. There is no error message beyond "not responding" in parentheses next to name of dialogue box. The screen grays out and stays that way. Then the screen becomes shaded with the whirling aqua ring and it's all over. Control + P and plot causes the system to crash as well.
at work we use custom paper sizes. We use HP Designjet 500 ploter and paper rolls of sizes 420, 610 and 910 mm. So I have made layout for all sizes: 410x 420, 600x610 and 900x910 mm. To share files between computers we use TortoiseSVN. But leaving for long time all sizes gets bad (page_ setup_ manager. png). Size from 410x420 becomes 409,96x419,95 mm. The same becomes in plot window too (plot.png). And to plot in right paper sizes we need to edit plot paper size again if not drawing is ploted in bad paper size (custom_paper_size.png). Is here a way to permanently bind good paper size to drawing?
I am working on an AutoCad drawing (Vers. 2013) that I got from someone else. I am setting up my drawing and right clicked my sheet tab as usual to go to the page set up manager. I set up my printer, ctb, paper size etc. But when I try to set my plot size to 1:1 it won't retain it and reverts to 1"=1'. It will however let me switch to anything other than to 1;1 (ie 1:10). I checked some existing drawings and the problem doesn't show up. So it's just this particular drawing that's messed up. I checked my drawing units and drawing setup commands and they are the same as I always use.
So the question is why won't let me use a plot size of 1:1?
I am guessing this will be a no but is there a way to change page setup for more than 1 page at a time? I have multiple pages in a drawing that I want to change to all the same page setup.
I just gave one of my drafters a new PC with AutoCAD 2013 and 2012 on it. We migrated the settings from her old pc with with 2012 to the new PC. All settings are correct except for the plotter. She had custom page setup that was used on all her drawings and that did not transfer. We setup a new one with the same settings but that requires us to reapply to every drawing.
Isn't there an easy way to do transfer these settings? If we choose the page setup most of the time it just goes back to none and a lot of the time it isn't even an option.
My drawings typically have 5-10 pages(layouts). The page setup on the layouts have the printer name set to my printer in my office. So I can pulish all layouts and print them all at once. I would like to be able to send these drawings to others with different printers and have them be able to print all layouts at once without going and and changing page setups or anything like that, its mostly non autocad people. How can I set this up?
I have just downloaded the 3 year trial of AutoCAD for students. I have managed to create a floor plan but struggling to amend the layout. First of all, I would like the page setup to be A3 but that is not an option on my Page Setup Manager as it will only connect to my printer size.
I am also trying to add a Title Block but again do not know what I am doing, or where to download template ones for free?
getting consistent crash when clicking on "new" in page setup manager dialog box.
Happens regardless of which drawing is open. Even for new blank drawings.This prevents me from creating new pagesetup overrides for Publishing. MAJOR PROBLEM.
At this point I have to get other people in the office to create new page setup for me. Editing existing page setups works find, only the "new" setups are a problem.
AutoCAD 2013 (G.114.0.0 SP 1.1), Windows 7.
Also, AutoCAD internal crash reporter is not called. Goes direct to Win 7, "Application has stop working" dialog.
Is there a way to remove the *Model* page setup entry from the list of Page Setups in the Page Setup Manager? This is the first time I am seeing *Model* in the list, and I suspect that it the reason I am not able to generate a PDF for this particular drawing. When I try, I get the following error:
========================= Job: - Error(s) Did Not Plot
Job ID: 5 Sheet set name: Date and time started: 2/1/2012 10:34:53 AM Date and time completed: 2/1/2012 10:34:54 AM UserID: AchrisK Profile ID: Total sheets: 1 Sheets plotted: 0 Number of errors: 1 Number of warnings: 0
ERROR: Internal Error: Failed to get Plot Settings Dictionary. ==================================================
I have this idea that removing *Model* from the list will do it. In addition to causing PDF creation failure, I believe it is also responsible for forcing the Model to always be in the Publish list, even though I have unchecked the "Include model when adding sheets" option. I can remove it from that list manually, but it comes back every time.
Trying to set up a datamerge file to create multi page spread documents with fields on different pages. Attempting to set it up so it's as automated as possible as there are up to 20 different merge documents needing to merge with up to 100 different csv records from the same file each week . The merge documents have different and repeated merge fields on most pages.
I've set it up so that the document has facing pages, and most pages have images spread across the whole of the spread. the pages preview fine, they are created ok when using 'Create Merged Document' although the page numbers continue from one document to another (another problem). but when I come to export to pdf, then the merge only shows the image on the left spread but on both left and right spread single pages, and the page numbers don't show the correct page numbers eg it will go p1 p2 p1 p2 etc all the way through the document instead of p1 p2 p3 - p20 etc. I don't want to have to merge first then pdf but can't understand why the images and page numbers are not showing correctly.
I have a Windows 7 machine running AutoCAD 2013. When trying to open any drawings from our AutoDesk Vault 2013 server, AutoCAD will hard lock/freeze and can only be closed by using Windows Task Manager. When accessing the same files through the Vault first, without opening AutoCAD, they open with no issues.
How do I add a new Pagesetup in VB.NET?I know I need the Plot.Settings class and I add it to the Drawing database. How to get started with the code and/or correct object?
I have existing .NET code that adds page setups to drawings. I now wanted to set the newly added page setup as "current" within the drawing.
The "manual" way to do what I am asking is by clicking the "Set Current" button from within the Page Setup Manager dialog. How would I do this programmatically?
I'm trying to find a setting which allows me to produce pdf copies of AC LT 2014 layouts that do not require rotation to view them in Adobe.
I've searched all through the pdf settings and still I have to rotate the pdf counterclockwise to view it in its correct orientation.
There's a setting which works for MS Office documents in the pdf options section but when this is applied in ACAD it doesn't work and I still have to rotate the view.
I am trying, in vane, to batch plot multiple dwg files to pdf's.
I have a pdf reader/writer (Bluebeam Extreme), but the plugin will not work (I have sent an email to Bluebeam to see if hey can sort it out).
So, I tried using the batchplot, but kept getting stuck when I had added multiple dwg's, using Publish, and then tried to change the page setup by right-clicking the files. The new page setup I had just created wass not available, apart from the dwg I created it in.
I hadn't notcied until now, as I usually use the Previous Plot dropdown when plotting, but whenever I create a new Page Setup, it is no longer in the dropdown combo box whenever I open up a new file, or even in the file I created it in if I close it down and reopen.
I am using AutoCAD LT 2010 with Windows 7 Professional, 32 Bit.
Not sure what causes a page setup already created and previously used to not be able to be selected at a later time. When selecting it, it reverts back to <none>. Does this mean the plotter changed/is not available? The network name for the plotter did not change, but the model of the plotter changed slightly. I have the same setup saved in 100's of drawings and assumed that as long as the network name for the plotter remained the same, the setup would continue to work.
we recently changed the printer we use for 11x17 drawings. Is there a quick way to mass import the new page setup? Or something else quicker and easier than going into each drawing and importing the new page setup one at a time?
I'm trying to plot a set of drawings that need to be set at 1:1. Every time I pick Custom or 1:1 and set it to 1mm = 1unit, AutoCAD immediately switches it to whatever 1:1_6 is, leaving me with a bunch of empty space around all my viewports.
I'm fairly new at using paper space, and I've never used a plot scale that have underscores in them, so I don't even know what they're representing.
I want to setup two different page setup for one file. For example, when I type publish command, I want to have option of either selecting pdf or selecting actual printer.
I have created a bunch of Page Setups (for both Paper and PDF) that work great when plotting from the plot menu. Lately, I've convinced my people to start using the sheet set manager and the publish command. However, on some computers, (not mine) plotting (to PDF) from the Publish dialog box outputs a file that seems to ignore the page setup. Using the very same Page Setup, the file comes out perfectly when plotting from the regular Plot menu. I don't understand how:
1- I get the same result with both methods on my computer (the one used to create all those page setups); 2- I get page setup to apply perfectly on my computer; 3- I get the expected result on the problematic computers when using Plot; 4- But I get different results on the problematic computer when using Publish.
*Note: In the publish dialog box, I use "Publish to: Plotter named in page setup" and then I select the wanted page setup for all my selected layouts in the list. My page setups are using "DWG to PDF.pc3", so the "plotter named in page setup" in all cases should be "DWG to PDF".
I've been doing tests with PDF files set on A1 format (841mmX594mm) and the output is perfect on my computer. Then on another computer, strangely, I get a PDF with these dimensions: 863.6mmX558.8mm (34"x22"). On the second computer, doing the very same steps, I get 431.8mmX279.4mm (17"x11"). Three computers, three different outputs with three different values. One works, two miss. I'm stoked.
Keep in mind that all three computers output perfect files when using the standard plotting menu (using the same page setups) so I doubt the page setups are incorrect. Does the Publish command deal differently with page setups than the plot command ? I would have assumed that both commands would react the same. I 'd like my team to be able to batch plot like I can on my computer.
We have just upgraded from 2009 to 2012. Also have merged with a New company that did use xrefernces for there title blocks and we did, and now i am trying to solve how to use there borders to create new page layouts.
Our page setups that we had in 2009 were created by a former employee that is longer with the company.
How we typically started a border/ sheet. We have a separate drawing file that has in model space a 24x36 border with our info that we want repeated on all our sheets.
Now that we are in 2012; The layout tap is a weird size and the 'layout black area' does not match when I import that 24x36 boarder file. The black area does not line up with "0,0,0" and that is what I and trying to figure out how to i make the black area of the layout start at 0,0,0 and be 24x36.
the picture i attached shows 0,0,0 and the 2 borders over layed.
the green box is 24x36.
the blue box is the new border which is ment to be sent within the 24x36 and the brownish red box is the old border and layout and what we used to use.
With ACDLT2010 is there a way to create 1 page setup and force it with one command to all SHEETS (Paper Space) or Multiple Files Model's prior to Batch Plotting a Project?
Reason i ask, is i regularly get files from other contractors, and they use different aspect ratio's / paper sizes / blah bleh blah. Manually going through and changing all the settings is time consuming and would be much easier if i can just pull up a list of drawing's and force a page setup to all pages.
I am trying to batch plot 60 .dwg files to PDF. When I do this, it slices off a piece of the title block on the right.
When I plot a single files I can set it to extents, 11x17, and center the plot, and the PDF comes up perfect.
I save this page setup and try to batch plot again, and when there is only one file on the list, my saved page setup is available in the dropdown menu. The second I add another one, my setup disappears from the list, and the import option doesn't appear to work (I choose a .dwg that my setup has been applied to and nothing happens).
Is there a trick to applying a saved page setup to an entire list of drawings in the batch plot utility?
I am running Inventor 2013 with vault 2013 on a brand new system. Everything was working great for a week or so, then inventor started to lock up during checkin. It would lock up with even a small simple part. I had the IT department try to remote in and change settings, with not luck. Then they "rebuilt" the system over again, this got things working for about another week and after that the problem started up again.
I have a list of drawings which i want to batch plot using dwg to png plotter. I want the page setup file to use sun high res, plot scale fit to paper, plot area extents, plot offset center the plot for the model space
When in batch plot, the page setup shows default, however this is not my pagesetup settings as it shows default none, how do i make it see the page setup i want?
I found a lisp routine on the internet to change page setups on multiple layouts. The lisp worked but on some of the layouts it moved the viewport off the paper background (see attached). The layouts print fine but the only way to get the viewport back on to the background is to open the page setup and click modify, then ok and close. I tested this on a .dwg that I had saved to my computer rather than on one in the main folder but I would like to do this to to all are maps since our IT decided to rename our printer and now all pages setups are no good.All I know about lisp is how to run one.
