Using Autocad 2011. If I pick an object, any object, in an old drawing, or newly created drawing, I cannot change it's color in the Quick Properties dialog box. "Color" is grayed out, and not selectable. I can change it via the pulldown in the Layer Manager on my toolbar, but not in the Quick Properties dialog. This just started happening.
View 9 RepliesWhen I select any object, my quick properties tab is blank and my properties tab doesn't register anything. Also, I get an error message when I go into my CUI to try to modify the quick properties tab. Pretty frustrating. I've attached a couple of images for reference. I've repaired, re-installed and unistalled and re-installed and still have the same probelm.
Dell Precision T3500
Intel(R) Xeon(R) CPU W3530 @2.8GHz
ATI FIrePRo V5800 (FireGL V)
12 GB Ram
64 BIt OS
I use Quick Properties in static mode mostly for counting objects and quickly seeing the length of lines and polylines. These lengths are listed in feet and inches. Would it be possible to add an additional length item to the quick properties menu which shows the inches/decimal length? Would be awesome as I wouldn't then have to do the math to convert to inches.
View 3 Replies View RelatedMy quick properties pick box came on for no reason. i have turned them off everywhere i can think of but it will not go away. i do not want the hovering QP to ever come on, how can i make sure this doesn't happen.
View 9 Replies View RelatedMy Quick Properties does not show my block attributes but they shows in Properties Palette. I have edit Quick Properties in my Custom.CUI that overrides ACAD.CUI settings. I'm using AutoCAD 2012.
View 9 Replies View RelatedMy quick properties palette is only showing about 4 lines...(actually about 4.2 lines - explained below)
I've already changed the minimum number of rows to 20, under 'Palette Behavior', under 'Quick Properties', 'Drafting Settings', and' Tools'.
I've closed and reopened Autocad several times since i've set this, but QP box will still not show more than 4 complete lines.
I've also gone to the CUI and changed the number of attributes i want to show for each different kind of entity, so i know it's not because i dont have enough lines to show....in fact, i can see a bit of the next line....i just can't drag the window any bigger!
I am trying to change an objects (a line) color in either quick properties or full properties and the color field is grayed out so I can't change the color.
View 5 Replies View RelatedFor the last couple weeks I've been unable to view object properties or quick properties. If I right click on an object and select quick properties, a blank window comes up:
Similarly, if I bring up a properties window and select an object, the selection field remains blank and the object property fields are not populated with information relating to the selected object:
I finally got some Lisp scripts working. They generate a block library from a CSV file. The script reads the file, and generates a simple rectangular block based on dimensions on the line. I have another script that can read a csv of block names and values, and add these as attributes to the block.
The attributes added are simple, like "weight" and "max stack qty". I would like to be able to see these values in the properties tab or in quick properties. In my CUI I have "Display Custom Attributes" checked under "block reference".
However, when I select a block, no attributes show up. I can get it to show me things like "name" and all of the scaling values, just no attributes.
How to change the color of the quick access toolbar? Mine is SO hard to see! This is on a Windows 7 64-bit OS.
View 5 Replies View RelatedI have been using Auto Cad 2007. How to get quick properties tools in Autocad 2007.
View 3 Replies View RelatedThe quick develop panel in the library tab is all grayed out and I am unable to make quick changes without being in the develop tab.All images are canon raw. I've never had this happen in lr3 or lr4. Is there a setting I am missing?
View 1 Replies View RelatedNot sure what causes a page setup already created and previously used to not be able to be selected at a later time. When selecting it, it reverts back to <none>. Does this mean the plotter changed/is not available? The network name for the plotter did not change, but the model of the plotter changed slightly. I have the same setup saved in 100's of drawings and assumed that as long as the network name for the plotter remained the same, the setup would continue to work.
View 2 Replies View RelatedWe currently have a drawing with several thousand groups. For some reason (I think it's got to do with copy and pasting) there are a lot of groups which are not selectable anymore. I know I can use the grouping dialogue to turn unselectable groups to selectable. However, as I mentioned, there are several thousand groups to filter through.
Is there a way to gobally change all group properties to selectable?
when i select an object with the quick properties on my cursor turns into the standard windows pointer like as though i have another window active and i need to pick in the drawing area before i can select anymore objects. this doesn't happen in plain autocad. my pickadd is set to 1.
View 4 Replies View RelatedI use windows 8 x64 and I've installed AutoCAD 2014, but error appeared Quick properties only don't show anything, only White color
View 9 Replies View RelatedIs there a way to have the AutoCAD "Quick Properties" pop up functionality be transferred over after the dwg is converted into pdf or dwf?
I want to avoid clutter in the dwg file but would like to have an ability for my field crew to either hover over or click the blocks or AutoCAD objects in the pdf file to know the block attributes or properties of objects.
The desire is to have a functionality very similar to creating yellow sticky notes in Adobe Acrobat Professional where the sticky balloons or call outs can collapse or even disappear if you do not want to see them.
I am having trouble with getting the quick properties box to display. I have turned the feature on at the bottom taskbar, and tried Ctrl+Shift+P, and changed settings so that it displays to the top-right of the cursor, but I get nothing when I select any object. It used to work on 2012 but not now.
View 8 Replies View RelatedI have made gridlines and put them on a locked layer. I want to be able to see them and snap to them, but I don't want to select them. Their selectability is hindering my ability to select objects on other layers. Is there any way to make lines on locked layers not selectable? (I don't like the Autocad standard grid.)
View 9 Replies View RelatedWhen working in paperspace existing or new layout viewports are non-selectable. The viewport boundary is not visible and all layers are turned on and thawed. Is there some sort of toggle to make viewport boundarys visible and selectable?
View 6 Replies View RelatedHave recently upgraded to 2014 and can no longer get the AREA of a closed polyline in quick properties. It is no longer an option when customising the quick properties information. I know you can measure area in a number of ways but it was very handy to click on a closed polyline and have the area of that object come up in the Quick Properties window.
how to get the Area of a closed polyline in Quick Properties for 2014?
I can not view/used the quick calculator of my Cad in Properties Dialog box. It is always hanging.
View 9 Replies View RelatedI am trying to get back some of my work that was "lost" when a crash accured. I had 16 blocks (all the same) inserted into my map at the correct locations. I recovered the drawing but noticed that the blocks weren't displaying. I conducted a quick select for the layer which they're on; it stated 16 items were selected (but they are not displaying). While they are still "selected" I checked the properties & it stated all the correct information (quantity, block name, color, layer, scale, etc...). I made sure all layers associated with the block were not frozen. So it's acting as though they're still in the drawing, but aren't displaying...
View 1 Replies View RelatedI have a further query, when I select an object (Line, Circle, Hatch etc...) how can I set the 'Quick Properties' to automatically show for the selected item(s)?
View 4 Replies View RelatedHaving issues with quick properties? When I click on my surfaces or features line my quick properties dialog box is blank..
View 2 Replies View RelatedMy Quick Properties does not show my block attributes but they shows in Properties Palette. I have edit Quick Properties in my Custom.CUI that overrides ACAD.CUI settings. I'm using AutoCAD Civil 3D as AutoCAD 2012.
Below you can see that Attributes are not any option.
I'm trying to make my changes in the local CUI file.
I'm having a minor issue with Autocad 2013 at the moment. I use the Quick Properties box to change a lot of my object properties, but since changing from 2012 to 2013, I have noticed QP doesn't recognise the selection of any objects.
View 9 Replies View RelatedWith QP activated, if I select an object (say an alignment or profile view) on the screen and want to pick its GRIP, I have to click the screen FIRST to get focus back to the drawing window (so two clicks). The same applies to the contextual Ribbon, it takes two clicks to 'press' a ribbon button if QP is activated.
View 9 Replies View RelatedMy Quick Properties does not show my block attributes but they shows in Properties Palette. I have edit Quick Properties in my Custom.CUI that overrides ACAD.CUI settings. I'm using AutoCAD Civil 3D as AutoCAD 2012.
Below you can see that Attributes are not any option.
I'm trying to make my changes in the local CUI file.
How to expand the Quick Properties Tool? show that it will show lineweight and more stuff (See Pic), some drawing that i work with Quick properties show more features, but this drawing doesn't.
QOJ.JPG
When I purge a drawing, the text styles are not a selectable option (as if there are no purgeable text styles). if i use (-purge), it will purge the unused text styles. I can also go into the Styles dialog box and delete the styles. It happens in all drawings and nobody else in the dept has the problem. I can't find any settings that would exclude any items from the purge dialog box as well. Autocad 2012? windows 7 64 bit.
View 1 Replies View Related