AutoCAD 2010 :: How To Change Number Of Lines In Quick Properties Box
May 2, 2012
My quick properties palette is only showing about 4 lines...(actually about 4.2 lines - explained below)
I've already changed the minimum number of rows to 20, under 'Palette Behavior', under 'Quick Properties', 'Drafting Settings', and' Tools'.
I've closed and reopened Autocad several times since i've set this, but QP box will still not show more than 4 complete lines.
I've also gone to the CUI and changed the number of attributes i want to show for each different kind of entity, so i know it's not because i dont have enough lines to show....in fact, i can see a bit of the next line....i just can't drag the window any bigger!
When I select any object, my quick properties tab is blank and my properties tab doesn't register anything. Also, I get an error message when I go into my CUI to try to modify the quick properties tab. Pretty frustrating. I've attached a couple of images for reference. I've repaired, re-installed and unistalled and re-installed and still have the same probelm.
Dell Precision T3500 Intel(R) Xeon(R) CPU W3530 @2.8GHz ATI FIrePRo V5800 (FireGL V) 12 GB Ram 64 BIt OS
I use Quick Properties in static mode mostly for counting objects and quickly seeing the length of lines and polylines. These lengths are listed in feet and inches. Would it be possible to add an additional length item to the quick properties menu which shows the inches/decimal length? Would be awesome as I wouldn't then have to do the math to convert to inches.
My quick properties pick box came on for no reason. i have turned them off everywhere i can think of but it will not go away. i do not want the hovering QP to ever come on, how can i make sure this doesn't happen.
My Quick Properties does not show my block attributes but they shows in Properties Palette. I have edit Quick Properties in my Custom.CUI that overrides ACAD.CUI settings. I'm using AutoCAD 2012.
Using Autocad 2011. If I pick an object, any object, in an old drawing, or newly created drawing, I cannot change it's color in the Quick Properties dialog box. "Color" is grayed out, and not selectable. I can change it via the pulldown in the Layer Manager on my toolbar, but not in the Quick Properties dialog. This just started happening.
Quick dimensioning a number of blocks doesn't work. Is there a way to do this without exploding the blocks.
For example I have 10 blocks at various intervals and I want to pick up the centre line position of each block to show the dims between each block centre.
For the last couple weeks I've been unable to view object properties or quick properties. If I right click on an object and select quick properties, a blank window comes up:
Similarly, if I bring up a properties window and select an object, the selection field remains blank and the object property fields are not populated with information relating to the selected object:
I finally got some Lisp scripts working. They generate a block library from a CSV file. The script reads the file, and generates a simple rectangular block based on dimensions on the line. I have another script that can read a csv of block names and values, and add these as attributes to the block.
The attributes added are simple, like "weight" and "max stack qty". I would like to be able to see these values in the properties tab or in quick properties. In my CUI I have "Display Custom Attributes" checked under "block reference".
However, when I select a block, no attributes show up. I can get it to show me things like "name" and all of the scaling values, just no attributes.
Why autocad always starts up with 2 layout tabs available on the drawing. In the template that I have created only one layout tab is available and if I create a new drawing according to that template after startup, only one layout tab is available. The template that I have created is set as the basic template for autocad, so it starts up using this template.
Now I want autocad to startup with only one layout tab available.
Is there are way to make the size of this dynamic, So you can drag it wider and taller, There are other boxes that seem to be frozen in size. I use this with many custom fields and it's difficult to enter data when you see what your doing.
' material thickness from multi-value parameter called ShThk
If ShThk = 0.3125 Then SheetMetal.SetActiveStyle("5/16"& Chr(34)) Else if ShThk = 0.25 Then SheetMetal.SetActiveStyle("1/4"& Chr(34)) Else if ShThk = 0.1345 Then SheetMetal.SetActiveStyle("10ga") else if ShThk = 0.105 Then SheetMetal.SetActiveStyle("12ga") else if ShThk = 0.1793 Then SheetMetal.SetActiveStyle("7ga") End If
Is there a way to change attribute properties (ex. text width factor) when the block is inside a multi leader? Double click on it only show the attribute value, not the enhanced attribute editor.
Is there a way to select a number if not all objects in a drawing and then change the properties (specifically color) from the command line i.e. without a dialog window?
Custom Build with Win7 Pro 64Bit SP1 Gigabyte Tecohnology Co. X79-UD3 3.60 gigahertz Intel Core i7-3820 16GB GSkill Ripjaw Z PC3 2133 PC17000 PCI-E ATI FirePro V7800 2GB 256bit ATA SanDisk SDSSDX24 SCSI Disk Device (256 GB) Dell 2001FP and (2) 2407WFPHC Triple monitor setup
when i select an object with the quick properties on my cursor turns into the standard windows pointer like as though i have another window active and i need to pick in the drawing area before i can select anymore objects. this doesn't happen in plain autocad. my pickadd is set to 1.
Is there a way to have the AutoCAD "Quick Properties" pop up functionality be transferred over after the dwg is converted into pdf or dwf?
I want to avoid clutter in the dwg file but would like to have an ability for my field crew to either hover over or click the blocks or AutoCAD objects in the pdf file to know the block attributes or properties of objects.
The desire is to have a functionality very similar to creating yellow sticky notes in Adobe Acrobat Professional where the sticky balloons or call outs can collapse or even disappear if you do not want to see them.
I am having trouble with getting the quick properties box to display. I have turned the feature on at the bottom taskbar, and tried Ctrl+Shift+P, and changed settings so that it displays to the top-right of the cursor, but I get nothing when I select any object. It used to work on 2012 but not now.
Have recently upgraded to 2014 and can no longer get the AREA of a closed polyline in quick properties. It is no longer an option when customising the quick properties information. I know you can measure area in a number of ways but it was very handy to click on a closed polyline and have the area of that object come up in the Quick Properties window.
how to get the Area of a closed polyline in Quick Properties for 2014?
I am trying to get back some of my work that was "lost" when a crash accured. I had 16 blocks (all the same) inserted into my map at the correct locations. I recovered the drawing but noticed that the blocks weren't displaying. I conducted a quick select for the layer which they're on; it stated 16 items were selected (but they are not displaying). While they are still "selected" I checked the properties & it stated all the correct information (quantity, block name, color, layer, scale, etc...). I made sure all layers associated with the block were not frozen. So it's acting as though they're still in the drawing, but aren't displaying...
I have a further query, when I select an object (Line, Circle, Hatch etc...) how can I set the 'Quick Properties' to automatically show for the selected item(s)?
My Quick Properties does not show my block attributes but they shows in Properties Palette. I have edit Quick Properties in my Custom.CUI that overrides ACAD.CUI settings. I'm using AutoCAD Civil 3D as AutoCAD 2012.
Below you can see that Attributes are not any option.
I'm trying to make my changes in the local CUI file.
I'm having a minor issue with Autocad 2013 at the moment. I use the Quick Properties box to change a lot of my object properties, but since changing from 2012 to 2013, I have noticed QP doesn't recognise the selection of any objects.
With QP activated, if I select an object (say an alignment or profile view) on the screen and want to pick its GRIP, I have to click the screen FIRST to get focus back to the drawing window (so two clicks). The same applies to the contextual Ribbon, it takes two clicks to 'press' a ribbon button if QP is activated.
My Quick Properties does not show my block attributes but they shows in Properties Palette. I have edit Quick Properties in my Custom.CUI that overrides ACAD.CUI settings. I'm using AutoCAD Civil 3D as AutoCAD 2012.
Below you can see that Attributes are not any option.
I'm trying to make my changes in the local CUI file.
How to expand the Quick Properties Tool? show that it will show lineweight and more stuff (See Pic), some drawing that i work with Quick properties show more features, but this drawing doesn't.
How to “synchronize” the ‘layout number” with “sheet number”?
As in most cases, the arrangements of “lay outs” reflects the way they are regularly printed, then how could we renumbering the sheets such that the first lay out takes number 1, the second lay out takes number 2,…and so forth.
