AutoCAD 2010 :: Synchronize The Layout Number With Sheet Number?
Mar 28, 2012
How to “synchronize” the ‘layout number” with “sheet number”?
As in most cases, the arrangements of “lay outs” reflects the way they are regularly printed, then how could we renumbering the sheets such that the first lay out takes number 1, the second lay out takes number 2,…and so forth.
Why autocad always starts up with 2 layout tabs available on the drawing. In the template that I have created only one layout tab is available and if I create a new drawing according to that template after startup, only one layout tab is available. The template that I have created is set as the basic template for autocad, so it starts up using this template.
Now I want autocad to startup with only one layout tab available.
I am using the sheet list table to generate a table of contents. I add the "Drawing Revision Number" column to the table, but when it generates the list it does not include the field.
Is there any way to add the "Sheet Revision Number" instead since this is what property is actually adjusted in the sheet's properties? (i never change the "Drawing Revision Number")
OR is the solution to change the "Drawing Revision Number"? Where do I change this property at? Is this property applied to all sheets within a drawing?
When I select the Synchronize option, it says there are over 295,000 images, which is impossible. 15 to 20,000 at most. So I never start it, cause I'm afraid of what it's trying to catalog. Why would it be giving me such a number?
When using multiple sheets within an IDW. Can the first sheet start out with a number other than 1, in otherwords start with sheet number 31, then every sheet after that be indexed by 1, ie 32, 33, 34 etc.
I want to use the part number propertie to change the sheet name in the .idw
So when i insert a new sheet and place a part the part number wil be placed in the title block and i want to change the sheet name to that part number.
On a multi page drawing, I want a sketched symbol to placed on a upper right hand side, “For BOM, see Sheet: X” to be placed on every sheet except the sheet where the parts list available on the drawings. Also the Sketched symbol prompted entry automatically filled up with the sheet number (Parts list page).
What is the code to select a drawing sheet by either its number or description but NOT both together?
Sometimes want need to select the first sheet by number 1 but the sheet description can change. and Sometimes we will need to select the sheet by its description but the sheet number may vary.
I am using Sheet Set Manager. I can use a field that will enter the sheet number on each layout. I am looking for a way to have a field use this number and minus 1 or add 1 to get the sheet before and sheet after the current sheet.
I am starting to use the Sheet Set Manager and I am just wondering if there is a way to "save as" instead of "rename & number".
We have drawing sets that we need to do Work as Executed drawings for which means we need to copy the sheet set and all the drawings with a "-WAE" suffix. Currently the only options I can find are
1) Copy the original drawings and sheet set, rename the set sheet, then use rename and number to rename files and paste originals back.
2) Copy and rename sheet set and files in explorer and then open new sheet set and remove old files and add new ones...
Would love to be able to just select sheet set, save as and create a copy of the sheet set and all dwgs in it with -WAE suffix.
I'm trying to come up with a way to automate the filling of the stock number field in the iproperties for different sheet metal rules. Currenlty I have linked the name of the rule to the description field using the =<Sheet Metal Rule>. So using that varible is out.
A quick solution was to make custom materials for all of the stock numbers and then link that to the sheet metal rule using the material box. This will work except I need to show material name on the parts list.
If only each sheet metal rule had its on iproperties, this would be so easy.
How to reference the drawign sheet number using iLogic? I see on the snippets on the side a way to reference the sheet name, but I only want the number. To get the name it is ActiveSheet.Name, but ActiveSheet.Number does not work. Getting the name give something like ASSM:1, so if there was a way to take that and subtract the colon and everything before it that would work also. I am not a programmer, I've just taked some programs I found online and modified them a little to do what I want to do, but this is holding me back a bit.
Overall, I'm trying to modify the drawing view label to have a project number, referenced from the drawign iProperties, a view label, and sheet number, and then save that info in an iproperty of the part, and then reference that in the BOM so it automatically labels all of the views and fills out a column of the BOM to reference which page and view to find the parts of the assembly. I have everything working except for the sheet number.
The Field dialog box has an item for CurrentSheetNumber with field expression: %<AcSm Sheet.Number>%
Is it possible to create a Field to display the Next Sheet Number (CurrentSheetNumber + 1) and a Field to display the Previous Sheet Number (CurrentSheetNumber - 1)?
I have been trying to create a macro that would add a custom property to my sheet metal parts that would tell me the total number of piercings in the part (holes and punches). So far I have the punches to count correctly but I am having issues with the holes, as I am getting an error.
Sub Piercings() 'Get the part doc and sheet metal component defn. No error handling: Dim oPartDocument As Inventor.PartDocument Set oPartDocument = ThisApplication.ActiveDocument Dim oSheetMetalComp As
Is there any VBA code that can count the number of bends used in a sheet metal part?I would like to make a custom property of this, so it can be exported to Excel for input in our ERP system
Is there a way to incude the sheet number that a drawing view has been moved to? I have an elevation tag that shows the view identifier, I am looking to have the sheet number referenced where I show "Field Text-Manual" in the attachments below. I am using inventor 2014.
Is there a way to show the last number of the dimension length as 5 or 0?I want to show the unit in mm with precision (decimal places) equal zero such that the and to force the last number as 5 or zero
For example, I need to display the 7554 mm as 7555 and the 7558mm as 7560.
How can you limit the number of open drawings in a session of AutoCAD. Now I can open up 35 drawings in 1 session which will take up a huge amount of memory.
Is there a variable or something like this that I can limit this to 4 for example?
I've got a large job and Object Isolate has been good for our drawing prodeuction but now we're running into some glitches on a regular basis the last few weeks.
1st Undo is being disabled. Thia really only started since we've begun plotting drawings and Isolating objects.
2nd We can't isolate everything. Is there a limit to the number of objects that can be isolated? or anything that controls that?