I've got a large job and Object Isolate has been good for our drawing prodeuction but now we're running into some glitches on a regular basis the last few weeks.
1st Undo is being disabled. Thia really only started since we've begun plotting drawings and Isolating objects.
2nd We can't isolate everything. Is there a limit to the number of objects that can be isolated? or anything that controls that?
i am using Acad 2005 for two years. since now i started to use acad 2010. i did find the difference in layer isolation in 2005 if you do layer isolation, only the particular layer visible. then can be select all of them in one window. without disturbing other layers. but in 2010 while i isolate a layer, other layers also visible in the backround. when i select the isolated layer in one window, also the backround layers also getting selected.
i am facing problem in selecting the isolated layer all objects in one window.how to do selection or how to work on that?
I have a SheetSet of a wastewater treatment plant that contains 70 sheets fully developed. The SheetSet incorporates Sheet Views, ViewLabels, and View Callouts as part of the SheetSet as well as Fields in the standard titleblock for Sheet Title and Sheet Number. A Sheet List Table created from the Sheet Set is used as the Project Sheet Index.
There are Structural and Mechanical (HVAC) drawings that require design subcontractor review and editing. These design subcontractors will make their own edits to our existing drawings. They are outside our office and have no direct digital connectivity with us. It is most likely not possible to provide them connectivity to our project file storage space for non-technical reasons. (i.e. it may be technically possible but not possible for other reasons not under my control.) Their knowledge and proficiency with Sheet Sets is unknown.
What is the, or is there a, best method for accomplishing coordination of our Sheet Set with the subcontractor edits under these conditions?
If digital connectivity between our offices is possible, what is the best practice / scenario for Sheet Sets with that setup?I'll need to send the files to these subcontractors or establish connectivity in the next few days!
I have created a design for a t-shirt competition. I have not read till now that you are only allowed to use a maximum of 8 colours in you design!! Trouble is that I do not know how many colours I have actually used :/I have read blogs on how to convert the colours by saving the file as a giff as well as posterising which all seem to make my work look like a waste of time..
View 6 Replies View RelatedI installed my photoshop brushes in the gimp brush folder, almost 2.0 GB of Brushes. Now GIMP crashes.
GLib-ERROR gmem.c:165 failed to allocate
And shuts down with a run time error.How do I get around this and is there a limit on the number of brushes that GIMP can handle?
Does Photoshop Elements 10 limit the number of styles that can be installed at one time? I can't seem to load in any more than I already have. If so, how to I have access to others? There doesn't seem to be a place where I can load new styles like you can with brushes.
View 2 Replies View RelatedI swear I remember being able to limit the number of files that came up on startup to speed up E-9, but can't find it anywhere!
View 2 Replies View RelatedI wish to limit the user input of and edittext to only allow a positive number, float or int. I do not yet know my Regex good enough to do this. I realize that I must get better at regex but in the meantime how to do this ?
I have used this so far on the edittext:
function checkTextInput()
{
if (this.text.match(/[^0-9.]/g))
{
this.text = this.text.replace(/[^0-9.]/g, "");
}
}
Which matches
000.0001
0.45.000.1
...1
which is not desired.
Desired is
0.n
.n
n.n
Is there any limit to the number of images that can be put into a PSE10 catalog? If so, what is the limit?
View 3 Replies View RelatedHow to “synchronize” the ‘layout number” with “sheet number”?
As in most cases, the arrangements of “lay outs” reflects the way they are regularly printed, then how could we renumbering the sheets such that the first lay out takes number 1, the second lay out takes number 2,…and so forth.
For example, in the screenshot below, the
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
Is there a way to limit the folder directory to only the last few directories?
Example:
If I have the file here,
C:folder1folder2folder3...folder10file.dwg
And I only need to know this,
folder9folder10file.dwg
Some of my files exist in folder directories that extend off the sheet within the plotstamp printing single line and I would like to shorten them to only show the last few directories as all the ones before are exactly the same. I do not want to change the plotstamp to multiline and I can not move the files to other directories as this is just how our system is set up.
I am currently selecting 10 objects from a picture and then I delete the background. This leaves just the 10 objects of interest in the image.
I have hundreds of these images and would like to compare the number of pixels or diameter of the objects across the images for each of the 10 objects. Is there a way I can automate Photoshop to go through a directory of images and measure the pixels of each of the 10 objects, and then export those measurements to a file?
Why is it that when you create the first constraint between any two components, the secondary component moves not only to satisfy the constraint, but also in ways that have nothing to do with the constraint. This is not occasional behavior, it happens every time.
I always have to stop and move the secondary component back out of the way to get to the other features I need to reference to continue.
I have some code in a VBA program I'm trying to convert to .net that loops through all the entities in model space as in the code snip below. What I can't figure out is how to get the total number of objects in model space at the start so I can use this info to advance a progress bar. ie the equivilent of VBA's "ThisDrawing.ModelSpace.Count"
Dim bt As BlockTable = tr.GetObject(DB.BlockTableId(), OpenMode.ForRead)
Dim btr As BlockTableRecord = tr.GetObject(bt(BlockTableRecord.ModelSpace),
OpenMode.ForRead)
' Loop for each entity in the modelspace
For Each entId As ObjectId In btr
'<code sniped>
'advance progress bar
Next
I'd like to know how to align an object in model space with the edge of my viewport in paperspace.
When I draw, I like to lay out multiple complete drawings in model space, make an appropriately scaled bounding box around them, and then snap a view port to the bounding box in my layout. I usually have multiple drawings lined up in a row in modelspace, so when I want a new layout I do a Save As and then pan around in my viewport to find the next bounding box, at which point I have to resize the viewport to get it to snap to the edges nicely. I really want to be able to to it the otehr way around- while panning I'd like to be able to grab a corner of my modelspace bouding box and snap it to the the corresponding corner of my viewport window. That way making new layouts would be a snap. Is there a way to do this in AutoCAD 2012 LT?
why a drawing would open without a number of objects (text) showing? I open it up and all notes are gone, yet another user opens it up in "eDrawings" and it opens fine. Oddly, when in ACAD I click OPEN, the preview ACAD gives me when I click this file once shows the missing text etc. But when I open it they're missing.
Below is a screenshot of firstly the drawing open in ACAD and secondly open in eDrawings.
I began to notice a weird glitch with the layer Defpoints.
When you isolate this layer any object on the layer is now unattainable to be selected via normal window crossing and direct object clicking. Go a head and try it and you will see what I am talking about. I also discovered even with a select few extra layers turned/thawed on with defpoints alone you still cannot select any objects on the layer. I noticed maybe +10 layers (dont quote me) turned on with defpoints then it is selectable as normal.
IIRC you can still select it via qslect once the layer is isolated.
I tried creating custom layers to replicate defpoints with non printable attributes etc. and it worked fine with this glitch because it wasn't defpoints but there's nothing like good ol defpoints. I personally tend to draft alot of behind the scenes information on defpoints.
Something changed in my settings & I don't know how to chance it back. I can't click on to select objects inside or behind objects. What do I have to change to be able to select any item I click on regardless of where it is?
View 1 Replies View RelatedI am looking for a way to extract (filter) all polylines, and loop a lisp based on the number that are found within a "W" selection window.I am frustrated getting "malformed list" or errors, even after defining "n" for repeat.The code I have so far looks like this:
(defun cWW (/ p1 p2 sspw myObj ss)
(setq p1 (getpoint "
Pick first corner: "))
(setq p2 (getcorner p1 "
Specify opposite corner: "))
(if
(setq sspw (ssget "W" p1 p2 '((0 . "*POLYLINE")))
[code].....
Without the (repeat () portion, it was working ok with selection window, however it only would run the commands for a single polyline. What needs to be done without overhauling the code? The lisp has worked on a drawing-wide basis, however needs to run on only on user-windowed polylines since there are other polylines within the drawing which are attached to layouts via viewports.
Trouble with embedded OLE DWG objects in word 2010 not opening with AutoCAD 2012
We have a user that can't open some OLE DWG files from within a word document. He had 2010 AutoCAD LT on his machine for a while then was upgraded to 2012 AutoCAD (non LT) once that was there LT 2010 was unistalled. since then he has not been able to open certain embedded OLE files within Word. Other users that have other ever had AutoCAD 2012 have no issue opening this embedded DWG files.
i found this thread (URL....) which sounds exactly what is going on with my enduser. But the fix provided is for AutoCad 2000-2012 not the LT versions.
I am using autocad 2013 primarily and other employees are using 2010. I am saving my drawings as 2010 and for me there are no issues. On the other hand people using 2010 are having objects missing in the drawing. All layers are turned on and all thawed. The primary objects missing are AEC objects. Is there a switch to show or hide these object?
View 2 Replies View Relatedis there any way to schedule objects by id number?, maybe through a formula within the schedule that may call the id or the revit API and if that is the case
View 2 Replies View RelatedI have installed AutoCAD in few of the machines using one of the User id.
Now i would like to know, on how many machines AutoCAD is installed using that user id.
Where I can get information on this.
Is there's any LISP or Program that can increase the number of points in 3DFace?
View 6 Replies View RelatedIs there a way to show the last number of the dimension length as 5 or 0?I want to show the unit in mm with precision (decimal places) equal zero such that the and to force the last number as 5 or zero
For example, I need to display the 7554 mm as 7555 and the 7558mm as 7560.
How can you limit the number of open drawings in a session of AutoCAD. Now I can open up 35 drawings in 1 session which will take up a huge amount of memory.
Is there a variable or something like this that I can limit this to 4 for example?
Why autocad always starts up with 2 layout tabs available on the drawing. In the template that I have created only one layout tab is available and if I create a new drawing according to that template after startup, only one layout tab is available. The template that I have created is set as the basic template for autocad, so it starts up using this template.
Now I want autocad to startup with only one layout tab available.
Is there a quick and easy way to number items in a drawing? I have attached a pdf and would like to number the seats 1-100.
View 1 Replies View RelatedI have text with number string. ( eg: weight 50 kg, xyz weight 362 kg)i want to extract the number values of "50" & "362" from the text string.
View 9 Replies View RelatedThe multileader arrow is not showing even if the number is increased (ie from "4" to "10") in the multileader dialog box or under the properties when modified.
View 2 Replies View RelatedI am using the sheet list table to generate a table of contents. I add the "Drawing Revision Number" column to the table, but when it generates the list it does not include the field.
Is there any way to add the "Sheet Revision Number" instead since this is what property is actually adjusted in the sheet's properties? (i never change the "Drawing Revision Number")
OR is the solution to change the "Drawing Revision Number"? Where do I change this property at? Is this property applied to all sheets within a drawing?