Revit :: Label (detail / Sheet Number) To Rotate With Section Tag Rather Than Remaining Horizontal
May 5, 2010
Is there a way for a label (detail number/sheet number) to rotate with a section tag rather than remaining horizontal?
Is there a way for the same label to flip along the main horizontal reference plane of a section tag?
We do not use the traditional circle head and when the head needs to rotate or flip the 'pointer' lands on top of the label.
I think I have exhausted all combinations of checked/unchecked boxes for 'Keep readable' and such.
View 7 Replies
ADVERTISEMENT
Jan 18, 2012
I put in building section targets and detail targets. When i opened it the next day some were missing from the drawing but the building section and detail views still exist. Where did the targets go/
View 1 Replies
View Related
Dec 10, 2013
Our company prefers to call out Sections and Elevations with a letter and Details as numbers. How can I make this happen in Revit? Can it happen in Revit.
View 2 Replies
View Related
Jun 19, 2013
Should we be able to right click on a detail callout and choose insert on sheet?
View 1 Replies
View Related
Jul 3, 2013
Can I have use both the horizontal and vertical secton tail in the same project? When I change the tail in one system family it changes the tails on all the types.
View 1 Replies
View Related
Apr 10, 2012
I working on a project in Revit Architecture and I have the Mechanical (MEP) and Structural (Structure) models linked into my model. I need to reference a detail in the structural model/sheet set. Is there a way to do that without creating a false callout tag with linework?
View 1 Replies
View Related
Mar 2, 2010
I want to modify the Room number label so that the rectangle outline displays smaller (less wide).
The rectangular box for the room number doesn't show up even when you open and try to edit the family, nor any parameters show up. How do you modify this box and make it smaller?
View 9 Replies
View Related
Oct 1, 2012
How to label all the windows at a time with serial number?
I’m wondering if there is a way to label all the windows at a time with serial number?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 2 Replies
View Related
Jul 17, 2011
I have a Revit problem that seems straightforward, but not to me at the moment. We have a label in the title block. The label comprises 3 parameters concatenated with “-“ separators:
Project NumberDisciplineSheet Numbereg:
123456789-A-001
Of those 3 parameters
Project Number: is inbuilt Revit Project InformationDiscipline: is Shared ParameterSheet Number: is inbuilt Revit Project Information In our Drawing List, for each sheet listed, we want one field to display the full label value: 123456789-A-001
View 3 Replies
View Related
Aug 12, 2011
I made this custom section head but the text doesn't rotate and follow the head location.
View 1 Replies
View Related
Feb 3, 2013
I am unable to visulize the projection line of fabric sheet in section view. However, the cut lines are visiual. how I can make them visiable?
View 3 Replies
View Related
Mar 28, 2012
How to “synchronize” the ‘layout number” with “sheet number”?
As in most cases, the arrangements of “lay outs” reflects the way they are regularly printed, then how could we renumbering the sheets such that the first lay out takes number 1, the second lay out takes number 2,…and so forth.
For example, in the screenshot below, the
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 2 Replies
View Related
Aug 14, 2012
curious if there's any way to keep guides vertical / horizontal when using the rotate view feature?
View 11 Replies
View Related
Dec 28, 2013
How to recover the Detail section, which includes sharpening, in the Develop module of LR 5.3?
View 2 Replies
View Related
May 19, 2012
In 2013, just placed a view in an idw. Now I need it rotated 90°. In pre2012, there was a rotate Horizontal and Rotate vertical command where we could pick the edge and it would align to it.
Has that been taken out of 2013 or am I just overlooking it? Restarted Inventor and that didnt work. I did not restore the marking menu because I have some customizations that I dont want to lose.
For what its worth, Wiki help shows the "Rotate View" command in the video..... maybe I don't have the full version...IDK. Looks like I am missing several commands here, like Apply Design View.
View 5 Replies
View Related
Jul 1, 2012
Is it possible to copy a section view or detail view from one sheet to another, without having to copy the base view?
If so how?
If not, why?
View 1 Replies
View Related
Oct 1, 2013
How to remove the view label text which is attached to a detail boundary? I know that if you double click ont he etxt you can manually delete it from the format text window but I want edit the default setting so that it doesnt appear on creation.
See attached image.
View 5 Replies
View Related
Feb 15, 2013
I am trying to put a word of text on an image but I need it to be on a line 90% from horizontal. How do I rotate it?
View 2 Replies
View Related
Dec 2, 2011
I am trying to create a wheel that can be rotate about the horizontal axis. It should have a hole for axle to fit through. However, when I try to do this it will not let me select the horizontal axis to rotate about. I also tried to rotate about a center line that I created but it wouldn't do that either..
Windows 7 64-bit (Service Pack 1)
3.40 GHz Quad Core processor w/ Hyperthreading
8GB Ram
ATI Radeon HD 6450 1GB Ram
View 9 Replies
View Related
Jun 25, 2013
I can only get horizontal or vertical 'orientation' in "Break" view.
How do I rotate it to say 60degrees to use on an iso view?
View 2 Replies
View Related
Feb 19, 2012
I need to rotate a snipped of text approximately 23% forward from horizontal.
I'm using 2.6.11. this is what I'm doing:
Open a new file. Select the text tool and type in text (I've tried this both on a new layer and on the background layer). Click on the rotate tool and click on the text.
Inevitably, the gunsight appears in the center of the whole page, though the textbox is selected, and when I rotate it the text stays stationary and the rest of the page rotates.
View 2 Replies
View Related
Dec 23, 2012
I have a grouped object with a line in it. I want to rotate the grouped object so, that the line in the object is horizontal or vertical. Now I do it by hand, this takes a lot of time.
View 1 Replies
View Related
Feb 28, 2013
I want to rotate three objects along a circular orbit, horizontally. But I want the objects always facing camera. I added the three objects to my comp, added a circle shape layer and rotated it to lay horizontally, then placed each object along the circle shape, rotating it slightly for each new object, then parenting each object to the circle once it was in the right place. From there, I added a camera and a null, parented the circle shape to the null, and set keyframes to rotate the null along the Y rotation.
The result is that the objects indeed rotate along the circular orbit, as I want, but they TURN as they rotate, which is not what I want. I've tried applying "Auto Orient...Orient Toward Camera" and "Orient Along Path", neither of which work. I've applied this to the null, the circle shape, and the objects. They all still turn.
Here's a screen for some context: Using CS5, but have a trial of CS6 if that's useful
View 7 Replies
View Related
Sep 27, 2011
The only topic i've found is old so I would like to ask if there is a possibility nowadays to turn the scale defaulty OFF.
[URL] ......
View 2 Replies
View Related
Mar 26, 2013
im trying to make an template we can use as default template..
now when i make a section view or a detail view of a part, the annotation is placed above the section view..
I would like to have that underneath the view.
I know can drag it down there, but is there a way to have the annotation underneath the view when its created? would save me and the rest who is going to use the template a lot of time..
View 2 Replies
View Related
Jun 6, 2012
Working with Inventor 2012: I have a rather large assembly (over 3000 parts) that was worked on by an outside engineering firm and includes several different Levels of Detail & Views under Representations. When they originally Pack 'n Go-ed the whole assembly and related .idw's over to us, all the .idw's seemed to show every view correctly without errors.
However, I've now went into the assembly and made several modifications to the overall master assembly and a few sub-assemblies within it (adding/deleting a few parts, nothing major). Now when I try to open a few of the master assembly .idw files, all the section & detail views have become full model views, losing their "cutaway" views. See the attached before & after pictures.
I've went back in to each .iam and made sure that the level's of detail & Views match the way the file was originally given to us but I can't seem to get the cutaway views back again.
View 9 Replies
View Related
Sep 11, 2006
Inventor 11 - Sp1
Why is the scale of my Detail Boundary line different than my Section Line scale? I have set the global line scale so that hidden and section lines look OK, but the detail boundary line spaces are so close that it prints as a continuous line. I am using the same line weight and line type for both detail and section lines.
View 5 Replies
View Related
Aug 7, 2013
Is it possible to scale the cross-hatching in a detail that was created from a section view so it looks better with the scale of a detail? If the scale factor of a detail is much larger than its parent, the cross-hatching is very sparse and detracts from clarity rather than adding to it.
View 2 Replies
View Related
Jul 9, 2012
Is there a way to customize the fence labels for detail and section views?
I know we can edit the label directly and add/remove text, but is there way to change the appearance of the label as well, with say a sketched symbol or other graphical representation like a balloon or other customized image?
View 4 Replies
View Related
Jul 25, 2011
We have an interior space built out for a commercial project incorporating curved walls in 3D. We need to generate a 2D drawing to be turned over to the on-site architect. Generating a 2D section yeilds a faceted wall. AECFACETDEV has no effect on the curve quality. Is there a control for Horizontal section? Walls do not show up using flatshot so that is not an option.
View 9 Replies
View Related
Apr 25, 2013
Is there any way to make a vertical or horizontal section plane of 3d solid leaving the rest of it like a solid?
Often I need to do pretty much complex view in which the same solid should be sectioned for half part of it and be solid for the rest. It is a common way to present solid draw but I can't do it with autocad 2013.
View 3 Replies
View Related
