When I try to switch to a different layout in a drawing AutoCAD will switch to a different drawing. Then I have to go and get back to that drawing to do anything to the layout.
View 9 RepliesI have a drawing with 72 layouts in it. I also have two drawings with one layout each, that I want to appear in the first drawing. How do I import the layouts from one drawing to the next? I found, "to import layouts as sheets", but it does not seem to be what I need.
View 6 Replies View RelatedIs there a way to turn off all section tags for drawings refering to all Sketch Layouts in all the Construction Document Layouts?
View 4 Replies View RelatedWe installed Autocad LT 2014 on our new computer and I noticed that it is unusually slow to switch between layouts.
The bottom bar (where the paper/model space button is) kept flashing/switching as if its thinking whenever i click from one layout to another. Even when I'm zooming in and out, the bottom bar kept flashing slowly.
I was hoping that a new computer+new cad will make our work more efficient and faster, but i noticed theres a lot of lagging and general slowness in loading files.
Problem 1 Most of the time when I am switching in between drawings that are open I have to "regen" the drawing that I switch to as nothing shows up when I switch.
Problem 2 Problem is copying layouts over. When I go to designcenter and then open drawings I try and drag a layout into a different drawing. Somtimes it works but usually I drag it onto the drawing and the new layout doesn't appear. I had this problem ever since I switched from 2010 to 2011 and now 2012.
We have a huge vault of old CAD drawings and the issue that we keep running into is that once some of these drawings are plotted and the drawings is re-saved the paper space layouts are flipping from landscape to portrait ignoring the default plot settings.
So we end up having to go to each paper space tab and individually switch each page back to landscape and then save, after that the drawings is usually good and won't repeat the problem but it's a real hassle as some of these drawings have a few dozen pages.
Is there any way to remedy this from happening or at the very least is there a way to select all the paperspace tabs and switch the page orientaion of all of them in one shot? I'm at my wits end trying to figure out something that to me seems as though it should be much easier, i.e. highlighting all the tabs and changing the settings for the bunch but alas CAD does not allow this.
When I work in large files (10,000 kb +) I experience significant delays when copying large amounts of information (copy a floor plan) or when switching between layouts or saving the dwg. I wish I could tell you it started right after I But I just recently started working with the larger files. So this could have been an issue from the time I bough the machine - 18 months ago.
it's either an issue with my graphics card or processor. I would like others to comment on their opinions on adjust my set-up to be more efficient
I believe I have the most current driver for the video card. Did I hear right somewhere that there is no good driver for the Quadro 4000 to work with 2012?
i have a test drawing attached with layout 1 and layout 2.
from model to layout 1 takes 2-3 seconds on my crappy computer, from model to layout 2 takes 8-10 seconds on the same crappy computer.
this sample i attached has a xref binded. which result is the same 3 and 8 seconds respectively.
you may think this is not a big deal. but layout 1 will take 10 seconds to to switch to if you have 5 xref while layout 2 will take a minute.
i did my research and haven't find the difference in variables between the two paperspace layouts.
tried all the variables made no difference:
psltscale, msltscale, celtscale, savefidelity, etc.
also set both viewoprts to undefined same thing.
the only difference is "1" is created from a blank autocad template by selecting "metric - no template", and "2" is imported from a civil 3d dwg after done a plan/profile production and that thing created that layout.
is there a tool to compare all variables between 2 layouts and find the differences? i am certain the problem lie within system variables.
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
Several users here in my office have been having a strange issue with ACA 2011. When doing various things such as, saving, regen'ing, or manually switching between open drawings, ACA will "blink" to a completely different drawing.
For example, right now I have 4 drawings open. I'm trying to go from drawing A to drawing B. It goes to drawing B and starts to regen model space, then it blinks back to drawing A. Does the same for any of the 4 drawings. Only way to make it stop was to close drawing A.
As I said, it not only does this when switching drawings. It'll also do it after it's done saving and when I try to regen.
I have 95 layouts in one drawing and need to export / write out each layout to become individual drawings? Is there a command for this or perhaps a lisp or script.
View 8 Replies View RelatedI have been trying to figure out how to copy a Layout from one DWG to another. I know there are several threads about this, and I have tried the methods they reccomend, but I am having an unusual problem.
I have been trying to open a Layout by using the "from Template" option for creating a new Layout, then opening the DWG containing the desired Layout. It works, but everything drawn in model space ends up compressed into the lower left corner and there is nothing in model space. So, the paper space information from the Layout is being imported, but the drawing info is getting mixed up somehow.
I have tried using the Design Center with identical results.
When using the undo command, plotting or switching between drawings in Autocad 2010 and now also 2011 I am experiencing long delays of up to 15-20 seconds at a time which is rather frustrating. I am running a fast spec computer and can't seem to overcome it, I haven't had the problem with 2009 and when need to do something quickly have found myself using the outdated software. Other users in the same office have equal or lesser spec computers and are not having the same issues, I have tried a re-install and this hasn't worked either. I was hoping the new 2011 version would solve this issue but no luck.
View 9 Replies View RelatedI am looking at streamlining page layout configuration. When I say this, I mean that I want there to be a button, a small msg to type into command line, or any general quick shortcut, to create a new Layout based on a specific template layout that is located on my server. There will be multiple template layouts that the user has the option to choose from when creating a new one, with each layout contianing an xref title block, and a particular size . Also, I would like these to avaiable everytime I open autoCAD, regardless of the current drawing being worked on.
I've looked at Macros and Sheet Sets, but I was wondering if there was an optium way to do something like this? I realize its a failry begginger problem but I am still a begginer at autocad.
Say I have 10 .dwg files. Each .dwg file has a printable layout, a load of geometry, and in particular, a layer called "Animals" with some geometry on it. During .dwg creating some of the CAD engineers turned off the "Animals" layer in MSPACE and saved the drawing.
I now want to come along as the reviewer and plot these 10 .dwg files all with the "Animals" layer turned on. Currently I'd have to go into every .dwg file and turn back on the "Animals" layer, and then plot.
On some 3D models, when I save the drawing, it automatically switches to perspective view and turns the sky background on. This is irritating.
I found this old thread in the AutoCAD Architecture area from 2010
[URL]....
Even setting the sky background to 1, then 0 doesn't work. When I save, it reverts to a perspective view and turns the sun/sky back on.
AutoCAD MEP 2010 64 bit
Revit Architecture 2010
Windows 7
I am trying to create a lisp to delete all the empty layouts from mydrawings. I do not see any code to control this.
View 8 Replies View RelatedI have a csv file that has the drawing names and their layout names listed in columns A and B. Before I begin a project, I have to create the Sheet List (in Excel) and the csv file. The csv file is needed because I have a lisp routine that reads the csv and updates all my Title Block attributes in all my drawings. (VERY sweet program) What I'm wanting to do, is create new layouts (using my dwt) based on the information in the csv file. So, when I start a new project all I need to do is create the base drawing files first. Then, in my csv file I've got those drawing names listed in Column A and their corresponding sheet titles (Layout names) in Column B. I run the lisp and it reads the csv and creates layouts in all those base drawings and naming the layouts with the sheet titles from column B.
Column A Column B
DRAWINGS SHEET TITLES
drawing1.dwg A100
drawing1.dwg A101
drawing"n".dwg "n"500
Etc, etc.
I'm needing a way to automate creating hundreds of layouts at once. (very time consuming).So the lisp has to be able to read a csv (or Excel--doesn't really matter) and create new layouts (using my dwt) in as many drawing files represented in column A. [and filtered so it doesn't create duplicates so I can run the routine at a later date when new sheets are added to the drawings] Captcha?
Okay, so I have about 25 layouts on this particular drawing that already have a default page setup assigned to them. I just created a new page setup and want to apply it to these layouts...but I cannot. I can select the right setup in the publish window but it does not stay current after publishing.
The problem also comes up if I do a "-purge" or wblock the entire drawing as to remove weird elements. The pagesetups then show as missing.
If I create a new drawing and setup the page setup for the first time AutoCAD will ask if I would like to apply to all layouts. Where is this option for existing drawings?
I used to use a really nice VBA routine for assigning a page setup to multiple layouts, but now I need something that will work for 2011 and up.
View 1 Replies View RelatedI would like a routine that will determine if 'Page Setup A' is in the drawing and if so, apply 'Page Setup B' to all all layouts within the drawing. I would like to have it run upon drawing open in the ACAD.lsp
Basically we've changed our master page setup names, and now when a user switches to modelspace then back to paperspace the layout loses its configuration.
Is there any way of applying a new page setup to all the layouts at once?
View 5 Replies View RelatedI am looking to fade-in pictures vs. having them simply appear in WD6. I found some code and got it working to change the pictures on the site but a fade-in option would be ideal.
Here is a previous post with the code I used to have the pictures switch automatically. [URL] ......
I am guessing this will be a no but is there a way to change page setup for more than 1 page at a time? I have multiple pages in a drawing that I want to change to all the same page setup.
View 3 Replies View RelatedI've been crashing (fatal error, unhandled access violation) a LOT lately, and it happens when I'm changing between tabs - both between layout tabs and from layout to model. I have a brand new computer and a recent install of AutoCAD, which I also ran the repair routine on recently to try to fix the crashing issue. This happened with my old computer as well, and our IT people thought maybe it was too old to handle AC 2013 (old one was about 7 years old), so now I'm running an HP Compaq Elite 8300, Win 7 OS, with an Intel i5-3470 CPU at 3.2 GHz, 8 GB of RAM, and an NVIDIA NVS 300 graphics card. And it still crashes.
I'm using files that were created on my old CAD station, which ran AutoCAD 2008 LT, and it started crashing on me - I suppose it's possible that one or more of those files got corrupted and that's what's causing this.It's crashed three times in the last three days, and probably a total of 10 - 15 times since my new computer came in late last month, and I'm getting pretty tired of it.
Why the layouts are not exported?why the layout are not exported when applying the command “Export”? why only one layout is exported?
Is there a way to export all the layouts as any part of the dwg file is exported?
Switching between each layout tab takes about 23 seconds.
What I know about the drawing:
-using AUDIT reveals no errors in drawing.
-Main drawing = 840 KB
-5 Xrefs total
-each Xref less than 1 MB each
-15 Layout tabs total in main drawing
-LAYOUTREGENCTL set to 0, 1 or 2 has no change on situation
when i go to preview plot after selecting D size, scale isn't correct. how do i change to correct scale for plotting after i've scaled each view in paper space. please see attached drawing.
Any good free tutorial online about viewports and plotting from them and to get correct scale?
I created a 3d model, and is now trying to put the views on a layout. There seems to be something that causes the view to overlap itself. I have attached a screenshot of the model & layout respectively. On the layout the color members are the ones not supposed to be there. I have printed the layout, and the result is the same as the screenshot.
View 6 Replies View RelatedI have to applicate to 3000 drawings the same page setup. How can I do that rapidly? I have one master drawing with the good page setup.
View 9 Replies View RelatedI have quite a few thousand of drawings that each has a different page setup saved in them. What I would like to do is to remove all of these pageset ups from these drawings, import a newly one, set it to current and then save the file for later printing. Maybe some lisp file that can accomplish this.
View 8 Replies View RelatedI use 2012 at home and 2013 at office, I would like to PUBLISH more than one layout in grayscale, now I`m having it in color.
how can I define the plot style/ page setup within the PUBLISH command?