AutoCAD 2010 :: How To Apply Page Set Up To Batch Of Drawings
Nov 11, 2013I have to applicate to 3000 drawings the same page setup. How can I do that rapidly? I have one master drawing with the good page setup.
View 9 Replies
ADVERTISEMENT
AutoCAD 2010 :: Change Default Page Setup Across Multiple Drawings
Nov 1, 2013I need to modify the page setup of multple drawings and have it save that way so everytime I open the drawing the chosen page setup is selected.
I'm aware of being able to set multiple page setups in the publish screen, but that isnt a permenant change to the drawings themselves, and not what I'm looking for.
AutoCAD .NET :: Batch Embed TIF Image Into Drawings?
Aug 20, 2013Due to customer constraints I have to embed .tif images into AutoCAD drawings. This is a manual operation doing a copy ->pastespecial. I was wondering if there was any way to automate this? The pastespecial command doesn't seem to take arguments to bypass the dialoge box and therefore does not allow me to batch embed .tifs programatically.
View 5 Replies View RelatedAutoCAD Print / Plot :: Apply New Page Setup To Multiple Layouts?
Nov 3, 2011Okay, so I have about 25 layouts on this particular drawing that already have a default page setup assigned to them. I just created a new page setup and want to apply it to these layouts...but I cannot. I can select the right setup in the publish window but it does not stay current after publishing.
The problem also comes up if I do a "-purge" or wblock the entire drawing as to remove weird elements. The pagesetups then show as missing.
If I create a new drawing and setup the page setup for the first time AutoCAD will ask if I would like to apply to all layouts. Where is this option for existing drawings?
AutoCAD Inventor :: Batch Export To DWG Solids And Drawings
Nov 8, 2011I have a client who is requesting that I send them ".dwg" files of a particular project. They are asking for both 3D solids AND 2D drawing files.
1.) I can export the assembly files to a 3D DWG easy enough but how do I do it for 83 files using task scheduler or something; I cannot figure it out?
2.) We have used ".dwg" as our native drawing format because we have people here who have a need to open our IV drawings using AutoCAD. Can I just send my client these files, without the supporting part files, and have them open them?
3.) If I just send them a copy of our native ".dwg" files are they going to be able to re-use that geometry somehow? There isn't a real IP concern as these are just pipe supports and platforms made from available steel shapes but I certainly wouldn't want them to be able to take our work and re-use it on a different project without us. If they have to do some crazy stuff like explode and scale and re-dimension these things in order for them to be re-usable on a different project, I would at least prefer that to them just being able to reuse them easily. I guess what I'm saying is that if they are going to re-use this content, I am not going to make it easy for them that's for sure!
Inventor Professional 2013 (SP-2.3), Product Design Suite Ultimate
Desktop: Intel Core i7 3.4GHz, 16.0 GB RAM, Windows 7 Ultimate SP-1, 64-bit OS, (2) GeForce GTX 580 (331.81), Space Pilot Pro (3.16.1)
Laptop: Intel Core i7 3.9GHz, 16.0 GB RAM, Windows 7 Pro SP-1, 64-bit OS, GeForce GTX 780 (331.81), SpaceNavigator (3.17.7)
AutoCAD LT :: Converting Batch Of Drawings Into TIFF Files
Jun 20, 2001Is there any way of running a batch process to convert a number of AutoCad drawings into Tiff format, at once? Also, if a batch process is not available, can we save our plot settings for conversion to Tiff so that they can be recalled at a later stage? We would like to be able to transfer the same plot settings to other PCs so that we are all producing the same formatted files. Are the plot settings transferable?
View 5 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Apply A Page Setup To All Layouts In The Drawing
Jun 13, 2013I would like a routine that will determine if 'Page Setup A' is in the drawing and if so, apply 'Page Setup B' to all all layouts within the drawing. I would like to have it run upon drawing open in the ACAD.lsp
Basically we've changed our master page setup names, and now when a user switches to modelspace then back to paperspace the layout loses its configuration.
AutoCAD Visual LISP / AutoLISP :: Apply Page Setup To Multiple Layouts?
Nov 25, 2013Is there any way of applying a new page setup to all the layouts at once?
View 5 Replies View RelatedAutoCAD Civil 3D :: Process Error Batch While Converting Drawings
Mar 26, 2012Why I get a process error batch converting these drawings? The command line says could not bind xrefs but I clearly checked the option not to bind.
View 2 Replies View RelatedAutoCad :: Batch Plot 50 Drawings - Publish With Block Stamp?
Jun 20, 2012I'd like to batch plot 50 drawings, all of which have the same title block in the same position. This is easy with the PUBLISH command, but I'd like to be able to add a "stamp" of the customer logo to these drawings, which I have as a block in a separate file. Basically I want to easily be able to plot the same drawings for different customers, the only difference being the customer logo. Is this possible?
View 1 Replies View RelatedAutoCad 2D :: Removing Page Setups From Multiple Drawings
May 4, 2011I have quite a few thousand of drawings that each has a different page setup saved in them. What I would like to do is to remove all of these pageset ups from these drawings, import a newly one, set it to current and then save the file for later printing. Maybe some lisp file that can accomplish this.
View 8 Replies View RelatedPhotoshop :: Apply A Border To An Image Batch ?
Jun 21, 2003I have approximatly 100 images, well, avatars for my forums, they're all the same size, ( 80 x 80 I think ? ), and I want to apply a border to them... can I do this as a batch job or something in photopshop ? I dont want to / wont apply borders too 100 images !!
View 6 Replies View RelatedAutoCAD LT :: Page Setup For Batch Plotting - 2011
Apr 10, 2012I am trying to batch plot 60 .dwg files to PDF. When I do this, it slices off a piece of the title block on the right.
When I plot a single files I can set it to extents, 11x17, and center the plot, and the PDF comes up perfect.
I save this page setup and try to batch plot again, and when there is only one file on the list, my saved page setup is available in the dropdown menu. The second I add another one, my setup disappears from the list, and the import option doesn't appear to work (I choose a .dwg that my setup has been applied to and nothing happens).
Is there a trick to applying a saved page setup to an entire list of drawings in the batch plot utility?
AutoCad :: Plugin To Allow Batch Plotting Of PDFs From Multi-sheet Drawings
Jun 17, 2011We have Adobe Acrobat Pro which has a plugin to allow batch plotting of PDFs from multi-sheet drawings. Works awesome in Autocad 2009 and before. It DOES NOT work with Autocad 2011!
We have drawings with 70 sheets and it's nice to print the entire document to a single PDF in one step. Takes less than one minute in Acad09. Nice!
AutoCAD 2013 :: Batch Erase Same Blocks And Strings In Multi-drawings
Oct 8, 2013I have 200+ page drawings and need to open each dwg to erase same block and text strings. Any way to batch erase same blocks and strings in multi-pages?
View 7 Replies View RelatedAutoCAD 2013 :: Switching Page Layouts Switches Drawings?
Oct 5, 2012When I try to switch to a different layout in a drawing AutoCAD will switch to a different drawing. Then I have to go and get back to that drawing to do anything to the layout.
View 9 Replies View RelatedAutoCAD Print / Plot :: Page Setup In Batch Plotting
May 27, 2011I have a list of drawings which i want to batch plot using dwg to png plotter. I want the page setup file to use sun high res, plot scale fit to paper, plot area extents, plot offset center the plot for the model space
When in batch plot, the page setup shows default, however this is not my pagesetup settings as it shows default none, how do i make it see the page setup i want?
AutoCad :: Batch Importing And Applying Page Setup To DWG In Directory
Feb 22, 2012Is there a way to automatically import a page setup and apply it to all layouts in all drawings in a directory? I have tried true view but it is only importing the page setup and not applying it to all layouts. I will have to dwg-to-pdf all of those drawings just after that preliminary operation.
View 1 Replies View RelatedXara :: Apply Curl To Page Rectangle?
Jul 16, 2013I can switch and go to another graphics program, but I would like to figure it out and use XARA X1 to accomplish it. How do you apply a curl to a page sorta like this:
View 6 Replies View RelatedLightroom :: Batch And Select Photoshop Action To Apply To Group Of Photos
Jun 25, 2013In Bridge, I can go to tools > Photoshop > Batch and select a Photoshop Action to apply to some group of photos. Can I do this in Lightroom?
View 2 Replies View RelatedXara :: Missing APPLY Button On Print Options Menu Page?
Aug 1, 2013The "Apply" button is missing on my print options menu (XDPX9). I cannot apply any of the functions such as Imagingsetting - crop marks, output settings, layout settings, separations settings.
View 3 Replies View RelatedIllustrator Scripting :: Apply Every Swatch Library Color To Path Items On Page?
Oct 1, 2012I'm trying to write a script that applies a single swatch to a single path item and repeat for every swatch that is currently contained in the swatch library. This script that I have written is only applying the last swatch in the swatch library to every path item on the page. Currently I'm more concered with getting each swatch that is currently in the swatch library to be applied at least once before worrying about applying the same patch to any extra number of patch items compared to the swatches.length.
// Apply every swatch library color to path items on a page
if ( app.documents.length > 0 && app.activeDocument.pathItems.length > 0 ) {
doc = app.activeDocument;
[Code]....
AutoCAD 2010 :: Apply Unwrapped JPG To Box
Dec 19, 2013I have attached what I am doing - I was able to do it back in 10 but can't figure it out after 3 years.
I created a solid box, I have a flattend (unwrapped) jpg of a shipping container. I can't get it to wrapp around aligned. It looks like it put the material on all sides and it wrapps all 4 sides over each out so its all wacked up.
AutoCAD LT :: 2010 - Can't Apply Update 2
Apr 4, 2012I am trying to install the update #2 for Autocad LT 2010.
I ran the update from the autocad ballon and I got an error.
I got a message to restart the computer. I did and i had a message i had to manually install.
I downloaded the correct update file (autocadlt2010update2x64.exe) and when I run I have error 1328.
Says "error applying patch to file C:Config.MsiPTE1B3.tmp. It has probably been updated by other means, and can no longer be modified by this patch."
AutoCAD 2010 :: Apply Layer State To Multiple DWG
Jul 30, 2012Is there a way to apply a Layer State to multiple DWGS, without going into each DWG?
View 3 Replies View RelatedAutoCAD 2010 :: How To Apply Textures On Solid Surfaces
Jul 12, 2012Is it possible applying textures on solid surfaces in AutoCAD 2012?
If yes, how do I apply textures on them?
AutoCAD 2010 :: How To Apply Temporary Override Key Tweaks
Nov 27, 2012I'm trying to override the F9 key with an AutoLISP subroutine invocation. However, though I have redefined the Temporary Override Key (associated with the F9 key) in the CUI editor, the F9 key nevertheless still triggers the default Toggle Snap Mode behavior. So it's not accepting the redefinition even though the new definition persists between AutoCAD sessions.
how to get the redefinition to take?
AutoCAD 2010 :: Apply Match Properties To Newly Created Multileader?
Aug 8, 2013I have a drawing with exsisting multileaders in it.
I am trying to apply the match properties to a newly created multileader but it isn't working.
AutoCAD 2010 :: Generating 2D Drawings From 3D?
Oct 23, 2012I'm using Cad 2011,how do u generate 2D drawings from a 3D object,i know that the command only works on layout n on 2013 the command is "Base".So wat is it on 2011?
View 4 Replies View RelatedAutoCAD 2010 :: Printing A Set Of Drawings
Oct 19, 2012I am using 2D-AutoCAD, and trying to plot a drawing on a printer, the drawing is different colors and I want to print it black on white paper, I am unable to select the proper .ctb file from the Plot Style Table pulldown, it does not show up? I have plotted other drawing sets using this method but for some reason cant do it on this particular set.
View 3 Replies View RelatedAutoCAD 2010 :: Combine Two Drawings Into One
Jan 14, 2013I need to have two people working in the same dwg, basically at the same time. We call it an Assembly Plan. Everything is done in model space. I want to be able to have each of them basically work in the same dwg and at the end of the day, BOTH of their work is saved in one dwg, but no double lines, etc.
View 2 Replies View Related