I have approximatly 100 images, well, avatars for my forums, they're all the same size, ( 80 x 80 I think ? ), and I want to apply a border to them... can I do this as a batch job or something in photopshop ? I dont want to / wont apply borders too 100 images !!
View 6 RepliesI would like to repeat the following procedure on a large number of images but I am unable to find a way of batch processing to do this for me. The idea is to end up with a small plain boarder around the original image. This is to prevent any image being lost when I order prints due to cropping.
1) open image
2) copy the image
3) create a new image 0.5" larger than the original
4) paste the copied image into the larger new image
5) resize the new image to a given size for example 10x8 for printing
6) Save the image under new name or in a different folder to the original.
When useing my old favorite graphic software MS Picture-It i often need to apply overall or border transparencies to many patches. Since im enjoying the pleasures of GIMPs select definitions which absolutely cause no distortions im often thinking - this be the only missing thing. Am i correct or do such functions like previewable halfways restoring of the previous look plus border fading indeed already exist in the new GIMP?
View 10 Replies View RelatedIn Bridge, I can go to tools > Photoshop > Batch and select a Photoshop Action to apply to some group of photos. Can I do this in Lightroom?
View 2 Replies View RelatedI am not able to apply "Border/Shadow/Transparency" upon editing a title. When I try to do it, I get the message: "Encountered an Improper argument".
View 2 Replies View RelatedI have to applicate to 3000 drawings the same page setup. How can I do that rapidly? I have one master drawing with the good page setup.
View 9 Replies View RelatedI am presently taking the The LAB Frontier course by Dan Margulis at Kelby Training and I am having difficulty with the Apply Image command working the way Dan said it would.
I am using CS3 on an PC.
Dan makes extensive use of this command in sharpening and other functions as follows:
Be in LAB color mode.
Start with a Background layer and duplicate.
Oversharpen Layer 1.
Have Layer 1 selected and go to Apply Image.
Apply the lower layer Lightness channel to the top layer reducing opacity to 50%.
CHANGE THE MODE TO DARKEN. This is my problem as Darken is not an available choice.
I have tried this on two different PCs with the same unfavorable result. why Darken mode is not available to me?
Recently, I've stumbled upon the "Apply Image" command via Images>Apply Images. (images must be same dimensions)
I found 2 arcane blending modes, "Add" & "Subtract". As usual, their explained in the help but still leaves me curious.
Add : adds the pixel values in two channels. Good way to combine nonoverlapping images in two channels.
Subtract: subtracts the pixel values in the source channel from the corresponding pixels in the target channel.
I can use the scale an offset to lighten and darken.
This "Apply Image" permanently modifies a image to your work. I don't like permanent because I'm always going back to tweak. Does anyone use this feature on a regular basis?
I'm using CS4 photoshop on my iMac 2008. When I try to apply image adjustments like 'posterize' or 'Brightness/Contrast' or 'Levels' to my image, I can adjust the settings in each dialog box, and I see the changes on my image because the 'Preview' box is checked. But when I click 'OK', the image reverts to its original and no changes are applied to the image.
I started out by importing a .jpg into photoshop. I've tried working on this .jpg, and I've also converted to Photoshop file format .psd, and still the same problem occurs. The original image had colour, but I converted it to grayscale. I also tried not converting to grayscale, and still the same problem. I am trying to make the image high contrast, with only black and white (no grey).
The same problem also occurs when I apply my adjustments on adjustment layers. Here I am able to modify each adjustment layer. The image changes and looks the way I want. But when I go to save the image, no matter what format I save as (.jpg, .psd, or .tif) the resulting image has none of the adjustments. It's still the original.
I am a beginner of Photoshop and I am really interested in Photoshop. Here is a big challenge I have met in the "Image>Apply Image..."
As it's shown in the picture, I use the Channel Alpha1 to alter the RGB Compound Channel and the Blending mode is ADD. And I can understand the fundamental of the above operation. Then question occur:
I don't get a full understanding of the Chek Box "Mask..." and I don't konw what it is used for. And what about some parameters "Image", "Channel", "Layser" about the "Mask..."
I resize and image, Photoshop "brightens" the borders, Why? I would like to just shrink an image, but it adds a one pixel border to the image that is lighter in color than all the pixels next to it making it blatantly obvious that its there. What could that conceivably be useful for, and how do I resize an image without it doing this?
View 3 Replies View Relatedis there a way i can tell photoshop to put a box around the perimeter of my image automatically. Just like a border?
View 5 Replies View RelatedI have just created a background image at 800x600 to use as my webpage background.
I want to create a border around it as its not quite the full screen size.
I will then just use a background colour in DW.
How would I now add a border to this image?
I have a specific requirement which is to apply an image, pattern or text to a 3d dome. The dome is will be in two half's and layed flat in 2d then printed off with the design so that when the two halves are joined together the image or pattern matches across the seam. Is this even possible?
View 2 Replies View Relatedbeen unable to apply text to a new image?
View 5 Replies View RelatedI applied text to one image on elements 10 but now it apperas on all the images I open. How do I trun it off?
View 9 Replies View RelatedI'm trying to script a simple action. I would like to make a frame matte around an image, fill it with black, then make a white stroke around the image but have it a few pixels away from the image itself... like this:
Attachment 18286
What I normally do is just create a shape on a layer underneath the image that is the exact size of the image... then transform that shape adding a specified amount of pixels (percent doesn't work, it comes out uneven) to each value. Now, this would be fine if all my images were the same size... but I need to be able to add a set number of pixels... say 10... to an arbitrary set of dimensions (changes each time I crop).
I want to put a old TV as the border for my gif animation. I deleted the tv screen and made it transparent, but I have no clue how add it as a border. My animation has over a 100 frames so it would be impossible to line them all up evenly.
View 1 Replies View RelatedI have a border on an image and was wondering how to remove it?
the image background is white and the border is black.
I use Photoshop CS2.
I have a photo that's placed on a larger background. I want to create a 2 pixel white border around the photo. I've tried using the rectangular tool but this doesn't work, I need it to be more precise, how do I do this exactly?
View 1 Replies View RelatedI have a 3ds model of a golf ball I purchased. It imports properly into my Photoshop CC. I haven't been able to figure out how to apply an image (my logo) to the surface of the golf ball. Also, the golf ball has a dimpled surface so I will want the image to follow the contours of the ball, as if it would look if the logo were painted onto a real golf ball.
EDIT: Also, I want to keep the golf ball as a 3d object so I can animate it in a scene.
I want to apply Burn to a flattened image, but without flattening. My image consists of several layers, and if I apply Burn to the image layer it doesn't work as well as when applied to the flattened image. But I don't want to flatten the image.
I have uploaded a test image here. It is a crop from a scanned Kodachrome using a Nikon Coolscan V ED which causes flare whenever highlights abut shadows. I can remove the flare fairly effectively on a flattened image with several Burn passes by using a brush size:75, Range: midtones, Exposure: 20%. But if I try it on the unflattened image layer, the results are not as good.
Am I missing something with the apply image command? Couldn't I perform the exact same task just by blending individual layers or images?
View 4 Replies View RelatedWhen I try to use the Apply Image Command to blend two images, the command only allows me to blend the target image with itself; that is, with two images open, the only image available to me as the source image is the target image.
View 2 Replies View RelatedI am trying to understand the difference between apply image and blending modes as I realize my grasp of it is weak.
Why blending the duplicate of an image with the original, with a given blending mode, does not give the same result as, Applying the duplicate of an image to the original with the same given blending mode in Apply Image?
What I have done in Photoshop, to be clearer :
1. one image ("background image"), duplicated it ("copy1") and set the blending mode ot linear light (for example). I get the result 1.
2. I selected "background image" and applied it in linear light (for this example), with Apply Image, to the "copy1" image. Result is different.
I have a lot of pictures taken under restricted library conditions where lighting is wysiwyg. A lot of the pics end up with an annoying gradation of tone caused by the poor lighting (and my poor photography skills), such as the attached image.
I use PSE 9 on a Mac.
How can I apply a uniform tone to images like this in PSE? For example, in the attached sample, the left-hand portion has a nice strong tone, while the right side is washed out. How can I create a nice unformity across the entire image?
Here's the thing happens :
1- BEFORE (a clean cutted image) :[URL]....
2- Using a plugin : (also with others): [URL]....
3- AFTER (white border) : [URL]....
This is so interesting.I use ''knockout2, remask3'' for cutting and ''Imagenomic Portraite'' for retouching.That never happened in CS4 32-bit.
Now i use CS6 64-bit and whenever i APPLY an effect/filter (include PS's Refine Edge) or plugin, there happens a strong white border/line on the image.
I can delete it by using so many ways like ''contract'' but it kills the details.
why is that happening?This must be an option or something cuz it never happened in any other photoshops that i used.I used the same plugins.
After I made a selection and then go to modify-Border, the border comes out feathered. Is there a way to create a hard edge border around an image or layer? Also what's the easiest way to create a border around a type layer?
View 4 Replies View RelatedI need to cut a car image out of a picture and insert it with a wildlife background but i must be able to place the car pic in a certern position in the background.
1.I was able to cut the image out using the pen tool then seleting new layer and then pasting in there. Now I want to make the pic a bit smaller (like click on the image and move the mouse in to make it smaller) But just not winning.
2.How can I open a new background image in the same project. when ever i click new it opens a new project and when i select new layer and copy and paste the image i want to use as a background it views as a thumbnail.
3. is it possible to blend the car image with the background like t is a origanal.
4. Oh and sorry is there a easy way of cutting a image then the pen tool my hand is not steady and i always seem to cut into the image or way out .
When saving a file with a solid, dark blue background as a JPG in PS CS4, it's producing a very faint border around it. On a web page, it needs to blend into a background that has the same color as that of the JPG; but it shows the faint borders. It also shows it when saving the file as PNG-24. How do you get rid of the border? What's causing this?
View 7 Replies View RelatedI create a new image in Photoshop, I always get a black border. I thought this was just while working in Photoshop, but when I save the file and try to view it the darn border is still there.
View 1 Replies View Related