Photoshop :: CS4 Channel Apply Image
Mar 4, 2013
I am a beginner of Photoshop and I am really interested in Photoshop. Here is a big challenge I have met in the "Image>Apply Image..."
As it's shown in the picture, I use the Channel Alpha1 to alter the RGB Compound Channel and the Blending mode is ADD. And I can understand the fundamental of the above operation. Then question occur:
I don't get a full understanding of the Chek Box "Mask..." and I don't konw what it is used for. And what about some parameters "Image", "Channel", "Layser" about the "Mask..."
View 10 Replies
ADVERTISEMENT
Mar 18, 2008
I am presently taking the The LAB Frontier course by Dan Margulis at Kelby Training and I am having difficulty with the Apply Image command working the way Dan said it would.
I am using CS3 on an PC.
Dan makes extensive use of this command in sharpening and other functions as follows:
Be in LAB color mode.
Start with a Background layer and duplicate.
Oversharpen Layer 1.
Have Layer 1 selected and go to Apply Image.
Apply the lower layer Lightness channel to the top layer reducing opacity to 50%.
CHANGE THE MODE TO DARKEN. This is my problem as Darken is not an available choice.
I have tried this on two different PCs with the same unfavorable result. why Darken mode is not available to me?
View 5 Replies
View Related
Jun 25, 2004
Recently, I've stumbled upon the "Apply Image" command via Images>Apply Images. (images must be same dimensions)
I found 2 arcane blending modes, "Add" & "Subtract". As usual, their explained in the help but still leaves me curious.
Add : adds the pixel values in two channels. Good way to combine nonoverlapping images in two channels.
Subtract: subtracts the pixel values in the source channel from the corresponding pixels in the target channel.
I can use the scale an offset to lighten and darken.
This "Apply Image" permanently modifies a image to your work. I don't like permanent because I'm always going back to tweak. Does anyone use this feature on a regular basis?
View 2 Replies
View Related
Apr 18, 2013
I'm using CS4 photoshop on my iMac 2008. When I try to apply image adjustments like 'posterize' or 'Brightness/Contrast' or 'Levels' to my image, I can adjust the settings in each dialog box, and I see the changes on my image because the 'Preview' box is checked. But when I click 'OK', the image reverts to its original and no changes are applied to the image.
I started out by importing a .jpg into photoshop. I've tried working on this .jpg, and I've also converted to Photoshop file format .psd, and still the same problem occurs. The original image had colour, but I converted it to grayscale. I also tried not converting to grayscale, and still the same problem. I am trying to make the image high contrast, with only black and white (no grey).
The same problem also occurs when I apply my adjustments on adjustment layers. Here I am able to modify each adjustment layer. The image changes and looks the way I want. But when I go to save the image, no matter what format I save as (.jpg, .psd, or .tif) the resulting image has none of the adjustments. It's still the original.
View 7 Replies
View Related
Mar 25, 2012
I have a specific requirement which is to apply an image, pattern or text to a 3d dome. The dome is will be in two half's and layed flat in 2d then printed off with the design so that when the two halves are joined together the image or pattern matches across the seam. Is this even possible?
View 2 Replies
View Related
Apr 24, 2004
been unable to apply text to a new image?
View 5 Replies
View Related
Jun 21, 2003
I have approximatly 100 images, well, avatars for my forums, they're all the same size, ( 80 x 80 I think ? ), and I want to apply a border to them... can I do this as a batch job or something in photopshop ? I dont want to / wont apply borders too 100 images !!
View 6 Replies
View Related
Aug 31, 2012
I applied text to one image on elements 10 but now it apperas on all the images I open. How do I trun it off?
View 9 Replies
View Related
Nov 14, 2013
I have a 3ds model of a golf ball I purchased. It imports properly into my Photoshop CC. I haven't been able to figure out how to apply an image (my logo) to the surface of the golf ball. Also, the golf ball has a dimpled surface so I will want the image to follow the contours of the ball, as if it would look if the logo were painted onto a real golf ball.
EDIT: Also, I want to keep the golf ball as a 3d object so I can animate it in a scene.
View 21 Replies
View Related
May 28, 2013
I want to apply Burn to a flattened image, but without flattening. My image consists of several layers, and if I apply Burn to the image layer it doesn't work as well as when applied to the flattened image. But I don't want to flatten the image.
I have uploaded a test image here. It is a crop from a scanned Kodachrome using a Nikon Coolscan V ED which causes flare whenever highlights abut shadows. I can remove the flare fairly effectively on a flattened image with several Burn passes by using a brush size:75, Range: midtones, Exposure: 20%. But if I try it on the unflattened image layer, the results are not as good.
View 8 Replies
View Related
Jul 9, 2013
Am I missing something with the apply image command? Couldn't I perform the exact same task just by blending individual layers or images?
View 4 Replies
View Related
Sep 16, 2013
When I try to use the Apply Image Command to blend two images, the command only allows me to blend the target image with itself; that is, with two images open, the only image available to me as the source image is the target image.
View 2 Replies
View Related
Oct 24, 2012
I am trying to understand the difference between apply image and blending modes as I realize my grasp of it is weak.
Why blending the duplicate of an image with the original, with a given blending mode, does not give the same result as, Applying the duplicate of an image to the original with the same given blending mode in Apply Image?
What I have done in Photoshop, to be clearer :
1. one image ("background image"), duplicated it ("copy1") and set the blending mode ot linear light (for example). I get the result 1.
2. I selected "background image" and applied it in linear light (for this example), with Apply Image, to the "copy1" image. Result is different.
View 6 Replies
View Related
May 14, 2013
I have a lot of pictures taken under restricted library conditions where lighting is wysiwyg. A lot of the pics end up with an annoying gradation of tone caused by the poor lighting (and my poor photography skills), such as the attached image.
I use PSE 9 on a Mac.
How can I apply a uniform tone to images like this in PSE? For example, in the attached sample, the left-hand portion has a nice strong tone, while the right side is washed out. How can I create a nice unformity across the entire image?
View 2 Replies
View Related
Jul 20, 2013
Steps to reproduce
open new image
add noise
now try to add unsharpen mask or curves (there are other that dont apply as well but.....)
you can see the effects in preview
click OK and the changes do not apply
View 2 Replies
View Related
Oct 15, 2013
Any way to, have a source color chart, a target color chart, calculate what are the variations between them, and then use that to apply it to another image? I'm not talking about "match color", I know how that works, but is not what I'm looking for. It can be compared to switching to a custom color profile (calculated by the variation of source and target). Or something like "color lookup" (but with a custom icc/icm/lut). Creating a custom icc has been really complicated for me, and I still can't get it to work. (I have the icc profile, but can't open it nor from "convert profile" nor from "color lookup").
View 9 Replies
View Related
Sep 21, 2011
Im trying to insert an image into 3Ds max. I selected my object I want it pasted onto, I then opened up my materials editor, under maps and then standard I selected Bitmap and selected my image. The image bitmap is showing up in the materials editor viewport but I cant apply it any objects (Assign material to selection icon is unavailable).
View 1 Replies
View Related
Dec 3, 2011
I have an image I am trying to create that I want to fade from right to left. In other words, I want the right side of the image to be full clarity, color, etc., and have it generally fade to almost gone by the time it gets to the left edge. Think of it as a gradient for an image.
Any way to do that with Gimp?
I found a blur tool. If I cannot do this with some kind of gradient tool, is there a "fade" tool?
View 3 Replies
View Related
May 23, 2012
How do I simply apply a watermark to an image and have it save within Lightroom 4 without having to export each individual image? I also have Perfect Layers and am having the same problem, it asks me to save each image as a seperate file and it's incredibly time consuming. Am I missing something, or should I return Lightroom and stick with Elements, which has layers?
View 1 Replies
View Related
Dec 21, 2012
Likely a pretty simple procedure, but I just can't figure it out. The Word Negative dealing with the effect, did not show up in the index or search of the app's help.
View 3 Replies
View Related
Nov 5, 2012
I would like to be able to apply developement settings to an image and commit to them, so that the sliders would go back to zero and I can use them again.
I know I could export a develped image, then import it and continue developing this image at its intermediate stage.
But is there a way to actually render the selected dev. settings while remaining in the develop module so that I can carry on using the sliders all over again?
View 2 Replies
View Related
May 21, 2013
How to add multiple presets to one image in LR?
View 2 Replies
View Related
Jul 16, 2012
When I load an image either a jpeg or psd file then make a layer copy I am unable to apply a preset action to this. Either a default action or one of my own on a Mac OSX running Lion. This did not present a problem in CS5 and I am wondering if I've missed something basic?
View 10 Replies
View Related
Nov 21, 2012
Is there an easy way to apply multiple effects on a set of images or individual images, similiar to something like a preset in LightRoom.
For example, if I run the following effects I have to apply it to each image one effect at a time and repeat for each image that I want the exact same effects applied but would prefer to do it all in one go
Blur/(GPU) Gaussian Blur
Noise/Reduce Noise
Photo/Sharpen+
I use these to clean up the moire from scans and reduce dust/dirt then apply a mild sharpen effect to bring back the now softenend image back up slightly. Being able to have presets would be a real bonus for quick clean ups, of digital camera images or camera phone images
I found it by spending a bit more time looking through the menus, under the Effect menu and the Advanced tab and creating a custom effects script ......
But now would like to see if I can have a list of presets instead of having to load them through the script engine one at a time, maybe an option under the 'Effects/Presets' menu option listing all the scripts that are currently saved.
View 7 Replies
View Related
Mar 9, 2013
I'm looking to take a certain part of an image (a small shape of it) and then apply darkening, progressively, from that small area. That is, the image gets darker and darker as it radiates out from that shape. Like a vignette, but progressively darkening from the point rather than a strait darkness.
Tried playing around with curves and didn't really do this effect.
View 5 Replies
View Related
Aug 6, 2013
How do I apply an edit to every file in a folder? Every time I need to do this, I end up flailing around for 10 minutes before I can finally get it to work. Or, sometimes I give up and manually paste the copied settings to each file one at a time. It seems a no-brainer that "copy settings" followed by "paste settings" to all files selected would do the trick. Or "copy settings" foillowed by "Sync settings." But it doesn't work.
View 3 Replies
View Related
Sep 19, 2012
Is there a way to apply an entire keyword set to selected image (as opposed to applying keywords one by one from a set)?
View 2 Replies
View Related
Jul 28, 2012
I have a hatch pattern in one of my objects. I want to apply exactly the same hatch pattern to other objects but I don't remember the settings for original hatch.
There is a command in ACAD to apply properties of one object to others (brush icon in toolbar). I tries to use this command but it seams that it doesn't work for hatch.
What is easiest way to apply a hatch pattern from an object to the other one?
View 9 Replies
View Related
Oct 12, 2013
I can only use the gradient tool in one instance. After that, the first instance is removed and replaced with the new instance. How can I apply multiple instances of the gradient tool on the same image?
View 1 Replies
View Related
Sep 11, 2012
1) Take a color image and apply a color-shift local adjustment to a portion of the image.
2) Convert the image to B&W.
Result -- The main image is converted to B&W, but the local adjustment doesn't change, i.e. it's still colored. Here's a trivial (and not-realistic) example of what happens:
My goal is to adjust the colors and the apply the B&W conversion to the entire processed image, not just the original piece. Is there a way to do this? I feel like I'm missing something small and easy.
View 5 Replies
View Related
Aug 6, 2013
I'm about 3 months and many hours of tutorials into Premiere ProCC, Audition CC, and Encore CS6. Apparently the nifty dynamic links from PPro and Audition CS6 no longer work with encore, as encore was not upgraded to CC. So,
I want to sample color from an original Photoshop image, and create an Encore menu color set, so that my menu buttons, etc. are colored to match the main photo image in the menu. Is there an eyedropper kind of tool in Encore that would let me sample the color from the image, and then apply that to color swatches in the Encore button layers?
View 5 Replies
View Related
