I have a specific requirement which is to apply an image, pattern or text to a 3d dome. The dome is will be in two half's and layed flat in 2d then printed off with the design so that when the two halves are joined together the image or pattern matches across the seam. Is this even possible?
View 2 RepliesI was editing my largest project to date (I'm still well a novice) and once I needed to remove a middle portion I realized how in the heck can I slide the remainder entire timeline to fit the gap? I tried the slide tools, hand tool, and the track select tool. I know host to highlight the remainder of the timeline.
View 3 Replies View Related The project involves me cutting out pieces of various images, and pasting them into one main image. It was going fine for the first ten or so image pieces, but the last time I tried to do it, something very strange happened.
When I pasted the piece of an image into my main image, it came out red and transparent.why it's doing this because I didn't change anything or do anything differently. What can I do to fix this?
I have received permission to use the attached logo (1st image) on a business card for a project.
I want to place it on a blue background, so I've copied the type in Illustrator switched the colors so everything can be read against blue and worked well. However, I can't seem to get whatever file type I place of the shield in Illustrator (tiff, jpg, gif) to not have white pixels around it. You'll see what I mean in the attached 2nd image.
I made a selection of the shield and then did a layer mask of the rest of the logo. There are some extra pixels but some are so small that I don't think I can get them all. I've tried placing the logo in InDesign too and there is the same issue.
Suddenly I'm having problems with the Arrange/combine/slice feature.
When I attempt to slice off a piece of an image, another straight cut occurs somewhere else on the image.
On the attached sample, I drew a wavy line like the one shown across the right arm of girl in the image and along with the expected slice was the vertical slice through the image. I backed up and started again, and the exact same vertical slice occurred.
This happens frequently, the unwanted slice is always straight , but sometimes horizontal, and sometimes angled. I'm using Wacom Cintiq tablet.
I'm having the same problem with my trial 7 version. I've been 'slicing' since Xara was a puppy.
when it comes to graphics editing. I want to distort an image by dragging a point around, resulting in the image being stretched or pulled by that point. I'm not seeking the stretch/distortion, as much as the movement of bits of the picture.
For example, imagine a smiley-face. I want to click and hold the mouse button on the end of the smile & then pull down to below the center of the smile. Do that again for the other end of the smile. Result = a 'frownie-face'.
Is there anyway to do such a thing with Paint.NET, or an existing plug-in?
I am trying to cut a piece of the enclosed text/image. It is an h and I want to simply cut the the curly part of the h at the end so I can attach it to the end of another text f, but with me using a rectangle and the Clipview technique to do this I am getting a larger space for the entire image so when I attempt to change the colour the whole rectangle's colour changes.
how I can simply trim the end/curly side of the h without getting rid of the png style effect?
how to make this dome shape in photoshop.
View 4 Replies View Relatedhow to create a dome wireframe effect for use in a background?
View 3 Replies View RelatedI am presently taking the The LAB Frontier course by Dan Margulis at Kelby Training and I am having difficulty with the Apply Image command working the way Dan said it would.
I am using CS3 on an PC.
Dan makes extensive use of this command in sharpening and other functions as follows:
Be in LAB color mode.
Start with a Background layer and duplicate.
Oversharpen Layer 1.
Have Layer 1 selected and go to Apply Image.
Apply the lower layer Lightness channel to the top layer reducing opacity to 50%.
CHANGE THE MODE TO DARKEN. This is my problem as Darken is not an available choice.
I have tried this on two different PCs with the same unfavorable result. why Darken mode is not available to me?
Recently, I've stumbled upon the "Apply Image" command via Images>Apply Images. (images must be same dimensions)
I found 2 arcane blending modes, "Add" & "Subtract". As usual, their explained in the help but still leaves me curious.
Add : adds the pixel values in two channels. Good way to combine nonoverlapping images in two channels.
Subtract: subtracts the pixel values in the source channel from the corresponding pixels in the target channel.
I can use the scale an offset to lighten and darken.
This "Apply Image" permanently modifies a image to your work. I don't like permanent because I'm always going back to tweak. Does anyone use this feature on a regular basis?
I'm using CS4 photoshop on my iMac 2008. When I try to apply image adjustments like 'posterize' or 'Brightness/Contrast' or 'Levels' to my image, I can adjust the settings in each dialog box, and I see the changes on my image because the 'Preview' box is checked. But when I click 'OK', the image reverts to its original and no changes are applied to the image.
I started out by importing a .jpg into photoshop. I've tried working on this .jpg, and I've also converted to Photoshop file format .psd, and still the same problem occurs. The original image had colour, but I converted it to grayscale. I also tried not converting to grayscale, and still the same problem. I am trying to make the image high contrast, with only black and white (no grey).
The same problem also occurs when I apply my adjustments on adjustment layers. Here I am able to modify each adjustment layer. The image changes and looks the way I want. But when I go to save the image, no matter what format I save as (.jpg, .psd, or .tif) the resulting image has none of the adjustments. It's still the original.
I am a beginner of Photoshop and I am really interested in Photoshop. Here is a big challenge I have met in the "Image>Apply Image..."
As it's shown in the picture, I use the Channel Alpha1 to alter the RGB Compound Channel and the Blending mode is ADD. And I can understand the fundamental of the above operation. Then question occur:
I don't get a full understanding of the Chek Box "Mask..." and I don't konw what it is used for. And what about some parameters "Image", "Channel", "Layser" about the "Mask..."
been unable to apply text to a new image?
View 5 Replies View RelatedI have approximatly 100 images, well, avatars for my forums, they're all the same size, ( 80 x 80 I think ? ), and I want to apply a border to them... can I do this as a batch job or something in photopshop ? I dont want to / wont apply borders too 100 images !!
View 6 Replies View RelatedI applied text to one image on elements 10 but now it apperas on all the images I open. How do I trun it off?
View 9 Replies View RelatedI have a 3ds model of a golf ball I purchased. It imports properly into my Photoshop CC. I haven't been able to figure out how to apply an image (my logo) to the surface of the golf ball. Also, the golf ball has a dimpled surface so I will want the image to follow the contours of the ball, as if it would look if the logo were painted onto a real golf ball.
EDIT: Also, I want to keep the golf ball as a 3d object so I can animate it in a scene.
I want to apply Burn to a flattened image, but without flattening. My image consists of several layers, and if I apply Burn to the image layer it doesn't work as well as when applied to the flattened image. But I don't want to flatten the image.
I have uploaded a test image here. It is a crop from a scanned Kodachrome using a Nikon Coolscan V ED which causes flare whenever highlights abut shadows. I can remove the flare fairly effectively on a flattened image with several Burn passes by using a brush size:75, Range: midtones, Exposure: 20%. But if I try it on the unflattened image layer, the results are not as good.
Am I missing something with the apply image command? Couldn't I perform the exact same task just by blending individual layers or images?
View 4 Replies View RelatedWhen I try to use the Apply Image Command to blend two images, the command only allows me to blend the target image with itself; that is, with two images open, the only image available to me as the source image is the target image.
View 2 Replies View RelatedI am trying to understand the difference between apply image and blending modes as I realize my grasp of it is weak.
Why blending the duplicate of an image with the original, with a given blending mode, does not give the same result as, Applying the duplicate of an image to the original with the same given blending mode in Apply Image?
What I have done in Photoshop, to be clearer :
1. one image ("background image"), duplicated it ("copy1") and set the blending mode ot linear light (for example). I get the result 1.
2. I selected "background image" and applied it in linear light (for this example), with Apply Image, to the "copy1" image. Result is different.
I have a lot of pictures taken under restricted library conditions where lighting is wysiwyg. A lot of the pics end up with an annoying gradation of tone caused by the poor lighting (and my poor photography skills), such as the attached image.
I use PSE 9 on a Mac.
How can I apply a uniform tone to images like this in PSE? For example, in the attached sample, the left-hand portion has a nice strong tone, while the right side is washed out. How can I create a nice unformity across the entire image?
I have to design a 3d model of 4v geodesic dome and I've never ever used 3d feature before . I am using Autocad 2012.
View 9 Replies View RelatedJust doing my normal practise in Illustrator. Ive came across designing a dome sphere shape. And Im using the 3d revolve techniqe, So I have my symbol to map onto the 3d elipse. but towards the top of the sphere the symbol tends to get distorted, and it looks aweful. So I also tried another technique to envolope distort with top object but its hard to achieve making it look 3d, because the sphere faces dont go around.
View 13 Replies View RelatedSteps to reproduce
open new image
add noise
now try to add unsharpen mask or curves (there are other that dont apply as well but.....)
you can see the effects in preview
click OK and the changes do not apply
How better to represent this shape - its a dome, which the height is a parameter (elispe), and the fins coming off the top of the dome are supposed to be angled (thicker at the bottom then the top), and the height of the fins needs to increase as they move towards the center.
I created a dome with a repeating pattern of fins but having trouble getting the varying thickness of each fin along with the varying height - the whole part I'm wanting it to be a thin wall shell that can be cast in aluminum and then cleaned up with cnc -
i would like to build one of these domes in my backyard and id like to be able to make simple plans to use. how would i go about drawing one of these up or is there a simple command like sphere or torus that would start me out? URL....
View 6 Replies View RelatedAny way to, have a source color chart, a target color chart, calculate what are the variations between them, and then use that to apply it to another image? I'm not talking about "match color", I know how that works, but is not what I'm looking for. It can be compared to switching to a custom color profile (calculated by the variation of source and target). Or something like "color lookup" (but with a custom icc/icm/lut). Creating a custom icc has been really complicated for me, and I still can't get it to work. (I have the icc profile, but can't open it nor from "convert profile" nor from "color lookup").
View 9 Replies View RelatedI need to create several domed solids (as different parts) based on 2D sketches of various shapes. I am trying to emulate domes that you might creating by pouring thick resin.
Using this forum I have found that you can do this easily using Loft to-point, then use the Conditions tab to get the dome height/shape set nicely.
The only problem is when the 2D shapes have a corner that is too sharp - then it leaves ridges on the domes - like the arrows show on this example - which is based on a simple rectangle with 0.5m radius corners:
I found one thread on this forum that said to use Delete-Face, then Patch - but the I couldn't get the patch to leave nice smoothed edges - and without bulging.
Trying to get ribs / fins constructed along the surface of this dome - like them to be evenly spaced and follow the angled plane above. Any thoughts on best way to build this ? Repeating patern doen't work because width of fin changes for each iteration across the dome.
View 2 Replies View RelatedHow to create a dome using just the surface area?
View 1 Replies View Related