Just doing my normal practise in Illustrator. Ive came across designing a dome sphere shape. And Im using the 3d revolve techniqe, So I have my symbol to map onto the 3d elipse. but towards the top of the sphere the symbol tends to get distorted, and it looks aweful. So I also tried another technique to envolope distort with top object but its hard to achieve making it look 3d, because the sphere faces dont go around.
View 13 Replieshow to make this dome shape in photoshop.
View 4 Replies View Relatedhow to draw a geodesic dome shape? some sort of lisp routine perhaps...
View 7 Replies View RelatedHow to create a dome using just the surface area?
View 1 Replies View RelatedAlright I am trying to create a shape made up of tons of instances of a symbol (best example of what I am trying to achieve is here )
I hoped I could just use draw inside mode and the symbol sprayer however I am not able to ensure the instances don't colide and that they actually completely fit inside the shape without being cut off.
I am obviously going about this the wrong way but have searched for unsuccessfully for any instruction on how this could be achieved.
I'm new to illustrator and I'm trying to achieve something I hoped would be quite simple. I want to take a bitmap, live trace it, then create an outline of 2px wide only around the outside limits of the shape. I want to then get rid of all of the live trace vectors and be left with my very simple outline of the original image. Eg.
I've tried image expand, I've tried outline, but nothing seems to work as I need it to.
How can I take these groups of white dots and have them go around the entire object while also taking it's shape?
View 9 Replies View RelatedI have a shape that I want to add a blend layer to by creating a square, adding a gradient then making it an overlay on top of said shape. The issue I am having is I cant find a way of masking out the unwanted areas of the blend layer. I have tried to follow the steps the official help and other internet help sections but it's not working. It's so easy in photoshop. How come it's so difficult in Illustrator? Is there something I am missing? Additionally, a blend layer (in most modes) wouldn't show any colour if overlaying upon white in photoshop. How come this isn't so in Illustrator?
View 4 Replies View RelatedBefore, when I created lines or shapes in illustrator a small window would show the size of whatever I was creating. Now it does not show up and what the size is of the shape or line.
View 5 Replies View RelatedI want to create a stroke profile with a modified brush stroke. Is that possible? Or do I have to begin with a shape?This is what I am trying to assign, but the option to save as a variable width profile is greyed out.
View 3 Replies View RelatedI have tried the offset path, however it gets too large. I am looking to keep things simple but need a bit more definition that just a simple outline will give. On this particular image I am looking to create an outline or fill shape behind the words and pistol but wanting to keep roughly the same shape.
View 6 Replies View RelatedI'm using CS3 on a Mac.
I outlined my text and subtracted it (and the tree image) from the black background. When I did this both appear thinner - particularly the tree.
If I then take the original version and the new subtracted version, and view them both overlayed one on top of the other in wire frame (outline) mode, there is no difference in the actual lines.
It seems to be a problem with the way illustrator previews the images. This wouldn't concern me, but when I export the file as a jpeg, the lines also appear thinner in the export.
I can create a manual solution by offsetting the path before subtracting, but this isn't ideal.
What does it mean when Illustrator v.15.1.0 ceases to contract a shape using offset paths and will only expand a shape? Seems like only yesterday I could render both ways. Wait a minute, it was only yesterday! Why would it suddenly stop funtioning?
View 3 Replies View RelatedI have two layers on the bottom I have text, and on the top I have a shape.
How do I make the shape transparent so the shape may be filled with the background color?
I'm trying to repurpose some artwork and am running into an issue. In the image below, I simply want to delete the bottom right corner of the blue box so that the orange background is visible along the right edge of the curved shape and the blue box is visible along the left edge of the curved shape. But I cannot figure out how to do this. I've tried all the Pathfinder choices and none work. How can I do this? CS6, Windows 7.
View 12 Replies View RelatedI'm trying to cover a section of letters that have been outlines with a red box over a serif for a homework project. HOWEVER. Everytime I do this, it looks like I have it all lined up and when I make another point, the points move on its own to be off and not cover the object Say I complete the box and try to cover the object by just dragging and dropping, it will avoid that area and move it off to one side or the other but never align with the actual object I'm trying to cover for a smooth and even coverage. Trying to get the red box to cover the black serif and it won't do it.
View 6 Replies View RelatedI have to design a 3d model of 4v geodesic dome and I've never ever used 3d feature before . I am using Autocad 2012.
View 9 Replies View Relatedto create a curved shape is. So say you have a rectangular shape running down the left side of the page, but the right side of the shape is curved.
View 6 Replies View RelatedI open a new project and add a layer, then create a rounded rectangle, is there a way to fill just that rounded rectangle with a gradient. I keep getting a message that the layer is not directly editable or something. I need to just play with the thing, I'm sure - eventually I'd porbably sort it all out. But I got a job creating a web page for a mortgage company and I wanted some custom buttons with a gradient fill -
View 2 Replies View RelatedI created this video to achieve this using Xara P&GD. The video is here and the .xar file you need is attached.
This video shows how to create an angle based object for visual presentation, any object created with this method should not be used in manufacturers drawings where precision is paramount.
I have a specific requirement which is to apply an image, pattern or text to a 3d dome. The dome is will be in two half's and layed flat in 2d then printed off with the design so that when the two halves are joined together the image or pattern matches across the seam. Is this even possible?
View 2 Replies View RelatedHow better to represent this shape - its a dome, which the height is a parameter (elispe), and the fins coming off the top of the dome are supposed to be angled (thicker at the bottom then the top), and the height of the fins needs to increase as they move towards the center.
I created a dome with a repeating pattern of fins but having trouble getting the varying thickness of each fin along with the varying height - the whole part I'm wanting it to be a thin wall shell that can be cast in aluminum and then cleaned up with cnc -
i would like to build one of these domes in my backyard and id like to be able to make simple plans to use. how would i go about drawing one of these up or is there a simple command like sphere or torus that would start me out? URL....
View 6 Replies View RelatedI'm creating navigational elements in photoshop and I want to be able to adjust the outline by itself, as well as there are some elements that are only an outline with no fill. How do I create shape outlines without the fill?
Adobe Photoshop CS4, PC.
i've scannd somthing, and i want it to look like its behind a glass window.. the object is pressed to the scanner so i got the behind somthing feeling.. now how do i make it look more like a glass window? a glass wall..?
View 9 Replies View RelatedHaving problems creating a helical truss/ shape. Ive managed to get a simple spline spiral. Which I'm still not 100 percent happy with. But it will suffice for right now.Now one of my problems is extruding, and offsetting. I'm pretty ok at 3d modelling, but when it comes to complex shapes i fall flat on my face. Ive including a dwg that shows a plan view of the structure, as well as my 3d spine. the small circles are the truss cords. Its a 16" flat truss, ran parallel with another to create a spiral ribbon.
The plan view is from the designer, I've noticed but maybe its not true... their helix doesn't seem consistent. I know im leaving a lot of info out.
I'm trying to create a linetpye .The line needs to be continuous with a solid(not hollow) circles at distances.This would be the same as FENCELINE1:
*FENCELINE1,Fenceline circle ----0-----0----0-----0----0-----0--
A,.25,-.1,[CIRC1,ltypeshp.shx,x=-.1,s=.1 ],-.1,1
but with filled-in circles.for example circles should be hatched or colored.An image of desired linetype is attached.
how to create a dome wireframe effect for use in a background?
View 3 Replies View RelatedI need to create several domed solids (as different parts) based on 2D sketches of various shapes. I am trying to emulate domes that you might creating by pouring thick resin.
Using this forum I have found that you can do this easily using Loft to-point, then use the Conditions tab to get the dome height/shape set nicely.
The only problem is when the 2D shapes have a corner that is too sharp - then it leaves ridges on the domes - like the arrows show on this example - which is based on a simple rectangle with 0.5m radius corners:
I found one thread on this forum that said to use Delete-Face, then Patch - but the I couldn't get the patch to leave nice smoothed edges - and without bulging.
Trying to get ribs / fins constructed along the surface of this dome - like them to be evenly spaced and follow the angled plane above. Any thoughts on best way to build this ? Repeating patern doen't work because width of fin changes for each iteration across the dome.
View 2 Replies View RelatedIn PS i can Magic wand selection shape from one layer, drop to sub layer and copy that selected shape from that sub layer. How do I do this in illistrator, and moreover, from multiple layer at the same time.
For instance, in PS = Import an image of gold - select a text phrse with wand - drop to gold - copy paste = gold text.