I'm trying to create a linetpye .The line needs to be continuous with a solid(not hollow) circles at distances.This would be the same as FENCELINE1:
*FENCELINE1,Fenceline circle ----0-----0----0-----0----0-----0--
A,.25,-.1,[CIRC1,ltypeshp.shx,x=-.1,s=.1 ],-.1,1
but with filled-in circles.for example circles should be hatched or colored.An image of desired linetype is attached.
I have created a custom linetype using a shape & also added text. I have tried countless combinations to have a different spacing for the text, without affecting the frequency of the shape.
I want there to be no space between the shape, just repeating. But I want the text to display only once for every 4 times the shape repeats. Is this at all possible?
Every time I change the text spacing, I get huge gaps in the between the shape and it seems that their spacing cannot be independently controlled.
I am working with Autocad Map 3D 2009. I just recently switched computers and I put all my custom shapes into the correct folder on my new computer (program files/autodesk/support) and my acad.lin in the correct folders. My custom complex linetypes were then working just fine.
Today, I open the drawing and all my custom complex linetypes are now dashed. I've checked my shape locations, I've checked my msltscale and my psltscale, tried reloading the linetype (it reloads and doesn't give me an error message about it being invalid). Why are my linetypes doing this???
Shape making from multiple complex shape and path layers?
so i have few layers(all vector paths and shapes) .
now how to make a shape from all of that. every new shape is layer for itself. I need it for logo.
I have a problem regarding a mechanical design. I want to make a pin move around a complex shape, always tangent to the sides of the shape. The point is not to have it animated, but I need the constrain so I can further work on the mechanical design.
I've attached a photo and the files.
Is it possible to run force analysis on my part in Inventor? I have used the force analysis before, but never for something so complex in shape. My main issues are constraining the base of the part and applying forces. I tried thickening sections of the part in order to apply a force/constraint, but now Inventor won't recognize the thickened parts as connected to the main body.
On a side note, it won't let me attach my file, which is 122 MB. Is it too large?
I have the 3d model of a ship, but it has no surfaces or solids, just lines. I want to create some solids based on those lines.
It's better if i attach the dwg to the post and explain what i want to do:
- in the file attached there are some lines marked with red and blue
- i want to create a solid/3dobject by extruding/lofting the red lines along the blue lines.
In the drawing only a few lines are colored, for better understanding. I tried with loft, but it only creates some surfaces. The point is that i need a solid or a 3d object.
sampla.dwg
How to compile a "master" .shp file that would include the coding for all of my shape files for custom linetypes. I did this years ago for a specific set of linetypes but I can not remember how I did it.
I know ACAD has the linetype.shp file that includes coding for ACAD supplied custom linetypes.
I think I remember inserting all of the shapes into a drawing and somehow compiling the *.shp file. Is that how it is done?
I need a custom linetype that includes a shape - a rectangle or a star.
How do I define this "shape" in my custom linetype?
I'm looking to create a linetype where I can incorporate a specific arrow shape. The best way of going about this? The application is to show on general layout plans the escape route with a polyline with the incorporate arrow.
Until now I have been drawing a standard PL then adding the arrows manually .
I am trying to create a complex shape with an opacity map. To keep things simple, consider an egg shape with heagon shaped windows. I have tried to create a solid / shell with boolean cut-outs, but getting these windows at the right angles is becoming very difficult.So, I tried a CV Surf with an opacity map. This allows for the windows to work well, but there is no depth to the surface.Is there a way to add depth to a CV surf object? Also, I want the map of the interior to be different from the exterior. A solid will have a ton of polygons, making mapping a huge time sink.
View 1 Replies View RelatedI have a client which wants me to change the color of his products - from bronze to chrome and vice versa. I'm specialized in web design in Photoshop, I tried different techniques but didn't manage to get a good enough result. I have to add that it's not only 1 product, but up to 100. Here are the images: [URL]....
View 3 Replies View RelatedI have a complex shape that has a cutout to the edge and I would like to apply a radius.I can, of course, play with nodes etc. but is there an easy way to do this? I use combine and weld etc. but the problem is ensuring the edges touch on both faces.
View 4 Replies View RelatedI have a topo map in max, and I'm trying to raise and sink parts of it to make sidewalks and parking lots. My thought was to import line objects from dwg files, shape merge them onto the terrain, change the material number, then extrude. The problem is that shape merge doesn't maintain the correct shape.
I've made sure that I'm in orthographic mode, looking straight down on the surface, but anywhere there's a curve it messes things up. Circles become irregular ellipses. Arcs become more convex or concave. Where I'm shape merging two different objects at different times, objects that had lined up, the curves are now different and they either overlap or no longer touch.
I'm assuming that it's because my terrain mesh is too complex, but I'm not sure how to get around that.
I've made a shape (attached image) and am trying to find a way to use it for a linetype. However, I'd like to have the left and right "blocks" filled (hatch or whatever) so that when used repeatetively in a linetype, the filled and open spaces will alternate. I may change it to be only 2 blocks or 4 - haven't decided yet.
I've made linetypes with simple line shapes, but never one like this.
I have exported the 3 polygons through the Map Drafting ribbon --> Export and then brought it back into CAD. This gave me 3 adjacent filled polygons (3 seperate objects) and I don't know how to show it as one shape entity, much less without the middle fill.
Is there another way I can accomplish this without the use of shapes?
Civil 3D 2012
Windows 7 Enterprise SP1
Dell Precision T3400
(Q9550 @ 2.83 GHz)
8GB RAM
Nvidia Quadro GTX 650 Ti BOOST
I have recently started using AutoCAD so I'm still figuring it out. I would like to create a line like this
¯¯¯V¯¯¯¯¯¯V¯¯¯¯¯¯V¯¯¯¯¯¯V¯¯¯¯¯¯V¯¯¯ and another one like this ¯¯V¯¯ ¯¯V¯¯ ¯¯V¯¯ ¯¯V¯¯ ¯¯V¯¯ (where the Vs link up with the line).
I have tried to do this through the lin file and have failed. The lines don't meet up, the gaps aren't in the right place and the line does not run along the top but in the middle: I have fiddles around with it but it complicated and long to do. I have also investigated creating these lines using express tools but it seems that this tool is not an option in AutoCAD LT 2010.
How do I create a linetype with text that is similar to the waterline linetype or sanitary sewer linetype?
View 3 Replies View RelatedI am creating a map of the US wherein each state would ideally be its own button. I would like this to trigger an event that makes that state bigger. How can I set this up? I have my map laid out in Illustrator with states on individual paths.
View 10 Replies View RelatedI am trying to create a linetype from the following:
FENCELINE3,Fence line ----X----X----X----X----X----X—
A,.5,-.2, ["X",STANDARD,S=.1,R=0.0,X=-.05,Y=-.05],-.2
I am getting a bad definition of FENCELINE3 at line 118 of C:Program FilesAutoCAD 2010UserDataCacheSupportacad.lin
Invalid number or bad continuation.
How does one draw a complex curved line to act as the path for a sweep in REVIT 14?
I need to create an arch (shown in elevation), that follows a curved path (shown in plan).
I am attempting to creating a complex profile of a window frame using the Edit Profile command within Sweep. It tells me that lines cannot intersect. How can I draw more that just a simple rectangular profile?
View 3 Replies View RelatedHaving problems creating a helical truss/ shape. Ive managed to get a simple spline spiral. Which I'm still not 100 percent happy with. But it will suffice for right now.Now one of my problems is extruding, and offsetting. I'm pretty ok at 3d modelling, but when it comes to complex shapes i fall flat on my face. Ive including a dwg that shows a plan view of the structure, as well as my 3d spine. the small circles are the truss cords. Its a 16" flat truss, ran parallel with another to create a spiral ribbon.
The plan view is from the designer, I've noticed but maybe its not true... their helix doesn't seem consistent. I know im leaving a lot of info out.
I was given a job where i need to create a surface from a gis file. have been messing with my civ 3d 2013 a little bit and have been able to get a surface comprised of a bunch of polylines to appear (not a true surface). I will need to create profiles so i need a true surface. I downloaded a compressed shape file from the county and need to know how to insert this into a drawing and build a surface using my own surface style.
The files i have to work with:
.dbf
.idx
.prj
.sbn
.sbx
"autocad shape source"
.shp
"autocad complied shape"
Using Mathcad, I can create a file with x and y values defining a 2D shape from which I want to create a swept volume.
I want to import these values into Inventor to use as a definition of a sketched line and then use the revolve function to generate the shape.
I accidentally found a pyramid shape and imported on top of my solid part shape.
Where can I found it, so I can import it again, but this time as the main solid part.
I am trying to design 3 parts that assemble into the shape of my business logo.
How can I copy a linetype definition from a drawing to the linetype definition file?
View 7 Replies View RelatedIs there a way to unfold a coil shape to get the flat pattern? When I try to unfold the attached part I get an error message (see attached error_msg.jpg). We have been using AutoPOL to unfold these kind of shapes (which works fine). But since we have a very old version which we really need to upgrade, I was wondering if nowadays Inventor could handle coil unfolds.
If this will not work with the current IV2013 release, will this then be implemented in a future release? Are there any alternatives or should I just go for the AutoPOL upgrade?
IV2013 Pro SP1
I have a series of boxes or polygones that I would like the program to find the 1/2 distance and create two seperate polylines from the one object.
Example:
I have a square with pt1,pt2, pt3 and pt4 respectively. After I have ran the program it would create a diagonal from pt1 to pt3 and join the rest of the lines now to create the one polyline. Also it would do the same to create another exact polygonal shape for the other half. Thus creating two shapes of equal value from one.
I want to create a custom linetype that uses a solid rectangle 0.5wide and 1.0 long. Basically I want to create a shape file from an existing block I have so that I can insert it into the linetype definition. Is there an easy way to do this in ACAD 2009?
View 8 Replies View Relatedto create a curved shape is. So say you have a rectangular shape running down the left side of the page, but the right side of the shape is curved.
View 6 Replies View RelatedI open a new project and add a layer, then create a rounded rectangle, is there a way to fill just that rounded rectangle with a gradient. I keep getting a message that the layer is not directly editable or something. I need to just play with the thing, I'm sure - eventually I'd porbably sort it all out. But I got a job creating a web page for a mortgage company and I wanted some custom buttons with a gradient fill -
View 2 Replies View Related