I am trying to create a linetype from the following:
FENCELINE3,Fence line ----X----X----X----X----X----X—
A,.5,-.2, ["X",STANDARD,S=.1,R=0.0,X=-.05,Y=-.05],-.2
I am getting a bad definition of FENCELINE3 at line 118 of C:Program FilesAutoCAD 2010UserDataCacheSupportacad.lin
Invalid number or bad continuation.
We tried to download the software with the serial number, however fail. It prompts the following error message
“Invalid Serial Number” Please re-enter a valid serial number.
I recently had to re-install Windows 7 and then had to re-install Adobe Creative Suite 2. When I try to register my product, which I have used for years, I now get an error message that says my serial number is invalid. How do I register this suite? I can't use it until I get it registered.
View 1 Replies View RelatedI just upgraded from CS3 to CS4. I could not find my CS3 disk anywhere, so I checked the serial number from within CS3 (Help -> System Info). I tried and tried to use this serialnumber into CS4 but everytime I got an error message something like "invalid serialnumber". It took me several days and hours to find out somewhere in the Internet that the serialnumber has 24 numbers, mine was only 20 numbers. It took me another several days and hours until I finally found my CS3 disk. And voila there were the 24 numbers. It seems that CS3 System Info gives only the 20 first numbers and hides the last 4.What is the point hiding the last four numbers?
View 16 Replies View RelatedIn the middle of a photoshop session the application spontaneously quit (when changing colour palette). This is a totally legal copy of CS2, recently successfully transferred to a new-ish Mac running Snow Leopard. When I tried to restart P'shop it came up with an error message "Your Adobe Photoshop user name, organisation, or serial number is missing or invalid. The application cannot continue and must now exit."Subsequent attempts to launch p'shop came up with a supposedly humorous "Space Monkey" splash screen.
View 4 Replies View Relatedtrying to install photoshop elements 11 and it says my serial number in invalid. i've typed in every number i see on the back off the case the dvd came in.
View 5 Replies View RelatedHow to “synchronize” the ‘layout number” with “sheet number”?
As in most cases, the arrangements of “lay outs” reflects the way they are regularly printed, then how could we renumbering the sheets such that the first lay out takes number 1, the second lay out takes number 2,…and so forth.
For example, in the screenshot below, the
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I have recently started using AutoCAD so I'm still figuring it out. I would like to create a line like this
¯¯¯V¯¯¯¯¯¯V¯¯¯¯¯¯V¯¯¯¯¯¯V¯¯¯¯¯¯V¯¯¯ and another one like this ¯¯V¯¯ ¯¯V¯¯ ¯¯V¯¯ ¯¯V¯¯ ¯¯V¯¯ (where the Vs link up with the line).
I have tried to do this through the lin file and have failed. The lines don't meet up, the gaps aren't in the right place and the line does not run along the top but in the middle: I have fiddles around with it but it complicated and long to do. I have also investigated creating these lines using express tools but it seems that this tool is not an option in AutoCAD LT 2010.
How do I create a linetype with text that is similar to the waterline linetype or sanitary sewer linetype?
View 3 Replies View RelatedI'm trying to create a linetpye .The line needs to be continuous with a solid(not hollow) circles at distances.This would be the same as FENCELINE1:
*FENCELINE1,Fenceline circle ----0-----0----0-----0----0-----0--
A,.25,-.1,[CIRC1,ltypeshp.shx,x=-.1,s=.1 ],-.1,1
but with filled-in circles.for example circles should be hatched or colored.An image of desired linetype is attached.
Size of Drawing file is 4.33 mb. But Can not Open. A message appears " Drawing File Invalid"
Can I Retrieve the data.? No backup file is available in my system. I have tried with recovery tool but unable to get original data
for Any other option .
I have a small LiSP routine I wrote about 14 years ago that no longer works. It is supposed to update a logo on a title block using the -insert command with a redefine option and a cancel
(command "-insert" "K:\FORMATS\LAYOUTS\GSILOGO.dwg" "y" ^c)
When I run the routine I get an error message "Invalide block name" and it cancels the command without updating.
Yet, if I insert the same block through the insert dialog box it allows the file to be inserted.
I get the above error message when i try to open a DXF file which was exported from LSS. The survey data from TPS seems to export fine, but the GPS data won't open.
I've read the previous posts on this error messages, but most seem to be relevant to autocad 2007. However tried the remedy suggested (through MS word) but that didn't work.
how I can Identify invalid solids without having to select each solid individually.I would think that a lisp routine would be the way to go, but I cannot find what makes a solid invalid as opposed to being valid.
View 3 Replies View RelatedWhen I try to open any of the Hydraflow extensions, I get the following message: "Installation error Invalid installation. Program ending." I ran a repair from Windows, but get the same result. How to successfully open/use any of these Hydraflow components in 2010?
View 6 Replies View RelatedI'm currently getting the "1324 Error. The folder path 'My Documents' contains an invalid character."
when trying to run AutoCad 2010. It had been working fine previously, but now it gives this error and won't allow me to use it. I am also unable to uninstall or reinstall the program without getting the same error.
I have confirmed that the profile is not set to roaming. I have also tried deleting the registry entries as recomended here:
[URL]
The user account is local administrator. The OS is Windows 7 64bit.
Is it possible to creat a linetype that doesn't repeat.
What I'm after is a line consisting of:
Long Line
Space
Short Line (roughly 1/3 length of long line)
Space
Long Line
( ______ __ ______ )
But that is all I want to see, regardless of the distance between the start and end points. I use this a lot for laying out joists.
I know I could make a dynamic block of it, but that would mean streaching every line between the two points.
I am wanting a soultion to a problem I am having when trying to have a combination of linetypes I either want psltscaled or not in a view port.
I.e. I want services linetypes to use psltscale = 1 and I want my linemarking linetypes to use a psltscale = 0, as I need the linemarking linetypes to show in the viewport at the original size they were created at but not the services linetypes as they look horrible.
I want to create a linetype just like this but cant seem to get it right..
View 3 Replies View RelatedIs it possible to create a linetype that has a shape that and spacing between the shape that would always be the same? I want to create a linetype that would have a shape that would always be 2 feet across with 20 feet between each occurance whether its in a 20 scale view port or a 60 scale view port.
View 4 Replies View RelatedI have an file where the linetype of a line will modify on print. The linetype will only 'move' when the endpoint of the line is outside the viewport.
I have attached a pdf to show what is happening along with the drawing file.
Another interesting thing is that when I change thickness of the linetype, it also moves.
I have tried recreating the polyline, reversing the polyline direction, auditing the drawing, but nothing.
Same linetype and linetype scale but different appearance!
I got the linetype Dot2 with linetype scale 0.02
The linetype Dot2 with 0.02 linetype scale appears in two different ways!
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
in layer translator the linetype scale does not work.
when i use layer translator, the resulted drawing comes with all layer ok but the linetypes scale does not.
Trying to set a Phantom line as the property line and also use dashed lines (ACAD_ISO03w100)
I can mess with the ltscale and make it so one or the other reads properly, but never both. The Phantom displays correctly at ltscale: 1, the dashed lines display when ltscale is .1 they are on different layers
How to compile a "master" .shp file that would include the coding for all of my shape files for custom linetypes. I did this years ago for a specific set of linetypes but I can not remember how I did it.
I know ACAD has the linetype.shp file that includes coding for ACAD supplied custom linetypes.
I think I remember inserting all of the shapes into a drawing and somehow compiling the *.shp file. Is that how it is done?
How do I set up a dwt so that linetypes appear the same no matter what the scale of the viewport. I tried AutoCad help but the recommended fix if I am reading it correctly is psltscale set to 1. That didnt work. We normally set our ltscale to 0.5. Should the scale of linetypes be controlled by the scale of the viewport? Isnt the scale of the viewport supposed to be multiplied by the ltscale so that the linetypes always appear the same no matter what the veiwport scale?
View 9 Replies View RelatedI work very closely with a customer, and have been asked to implement their drafting standards for a dwg file they received from another vendor. I have attached two drawings, 1 (their vendor's) and 2 (mine, in progress). When opened, I notice the linetype scale *appears* different between the drawings (note the differences within "LINE LEGEND" section of both drawings). It *appears* as though Drawing 2 has double the linetype scale of Drawing 1.
I realize that within Drawing 2 I could set the LTSCALE variable to 0.5, but that seems like a work-around and may cause problems with other aspects of the customer's drafting standards in the future.
I've already confirmed that both drawings have the same values for LTSCALE, PSLTSCALE, MSLTSCALE, CELTSCALE. I've also already confirmed that, for the "PACKAGED EQUIPMENT" entry with the legend, the properties dialog box shows the exact same values for all fields. Lastly, (trying [URL] .....) I re-loaded the linetype for PHANTOM2.
I'd like to have them both appear the same, if possible.
I'd like to make a custom linetype that is a the standard DASHDOT linetype, but with a small circle drawn on the ends of the line or arc (and only at the ends).
View 4 Replies View RelatedI loaded a linetype (.lin file) in ACAD 2010 and it came out wrong. I would like to permanently remove it from ACAD(where it cant be seen when you go to load another type of line), how do you do that?
View 7 Replies View RelatedI'm trying to set the plot styles to use specific linetypes for given colors. The theory is that using adaptive linetypes, then lines that are color 50 for example will always display dashed regardless of the length. This seems to work great, except that I'm not happy with the linetype scale (dashes plot too long). Obviously changing linetypescale does not work because adaptive is turned on. So the only solution I could think of was to change the actual linetype definition, but the acad.lin file does not seem to be related to the linetypes shown in the CTB editor (or is it?). How to change the linetype definitions that are linked to the ctb style?
View 8 Replies View RelatedI am trying to custom a new linetpye as below, with an arrowhead at the beginning and at the end but point to opposite direction. This is easy to build such linetype in Microstation, but I am new in autocad.
View 1 Replies View Related