I have an file where the linetype of a line will modify on print. The linetype will only 'move' when the endpoint of the line is outside the viewport.
I have attached a pdf to show what is happening along with the drawing file.
Another interesting thing is that when I change thickness of the linetype, it also moves.
I have tried recreating the polyline, reversing the polyline direction, auditing the drawing, but nothing.
I'm trying to set the plot styles to use specific linetypes for given colors. The theory is that using adaptive linetypes, then lines that are color 50 for example will always display dashed regardless of the length. This seems to work great, except that I'm not happy with the linetype scale (dashes plot too long). Obviously changing linetypescale does not work because adaptive is turned on. So the only solution I could think of was to change the actual linetype definition, but the acad.lin file does not seem to be related to the linetypes shown in the CTB editor (or is it?). How to change the linetype definitions that are linked to the ctb style?
View 8 Replies View RelatedI have a problem to plot thin lines and dots when Plot Transparency option is On in the Plot dialog box.
The lineweight is a half of the original. I think i have tried everything.
It shows correctly in the Plot Preview but when printed there are no dotted hatches and lines are much thinner.
AutoCAD - Why does the Normal plot style plot in color? Black seems to make a lot more sense. Almost everyone in Architecture uses black prints most frequently so that should be the default. And you can't adjust Normal to all black. So what was AutoDesk's reasoning?
View 9 Replies View RelatedIs it possible to creat a linetype that doesn't repeat.
What I'm after is a line consisting of:
Long Line
Space
Short Line (roughly 1/3 length of long line)
Space
Long Line
( ______ __ ______ )
But that is all I want to see, regardless of the distance between the start and end points. I use this a lot for laying out joists.
I know I could make a dynamic block of it, but that would mean streaching every line between the two points.
I am wanting a soultion to a problem I am having when trying to have a combination of linetypes I either want psltscaled or not in a view port.
I.e. I want services linetypes to use psltscale = 1 and I want my linemarking linetypes to use a psltscale = 0, as I need the linemarking linetypes to show in the viewport at the original size they were created at but not the services linetypes as they look horrible.
I want to create a linetype just like this but cant seem to get it right..
View 3 Replies View RelatedIs it possible to create a linetype that has a shape that and spacing between the shape that would always be the same? I want to create a linetype that would have a shape that would always be 2 feet across with 20 feet between each occurance whether its in a 20 scale view port or a 60 scale view port.
View 4 Replies View RelatedSame linetype and linetype scale but different appearance!
I got the linetype Dot2 with linetype scale 0.02
The linetype Dot2 with 0.02 linetype scale appears in two different ways!
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
in layer translator the linetype scale does not work.
when i use layer translator, the resulted drawing comes with all layer ok but the linetypes scale does not.
Trying to set a Phantom line as the property line and also use dashed lines (ACAD_ISO03w100)
I can mess with the ltscale and make it so one or the other reads properly, but never both. The Phantom displays correctly at ltscale: 1, the dashed lines display when ltscale is .1 they are on different layers
How to compile a "master" .shp file that would include the coding for all of my shape files for custom linetypes. I did this years ago for a specific set of linetypes but I can not remember how I did it.
I know ACAD has the linetype.shp file that includes coding for ACAD supplied custom linetypes.
I think I remember inserting all of the shapes into a drawing and somehow compiling the *.shp file. Is that how it is done?
How do I set up a dwt so that linetypes appear the same no matter what the scale of the viewport. I tried AutoCad help but the recommended fix if I am reading it correctly is psltscale set to 1. That didnt work. We normally set our ltscale to 0.5. Should the scale of linetypes be controlled by the scale of the viewport? Isnt the scale of the viewport supposed to be multiplied by the ltscale so that the linetypes always appear the same no matter what the veiwport scale?
View 9 Replies View RelatedI work very closely with a customer, and have been asked to implement their drafting standards for a dwg file they received from another vendor. I have attached two drawings, 1 (their vendor's) and 2 (mine, in progress). When opened, I notice the linetype scale *appears* different between the drawings (note the differences within "LINE LEGEND" section of both drawings). It *appears* as though Drawing 2 has double the linetype scale of Drawing 1.
I realize that within Drawing 2 I could set the LTSCALE variable to 0.5, but that seems like a work-around and may cause problems with other aspects of the customer's drafting standards in the future.
I've already confirmed that both drawings have the same values for LTSCALE, PSLTSCALE, MSLTSCALE, CELTSCALE. I've also already confirmed that, for the "PACKAGED EQUIPMENT" entry with the legend, the properties dialog box shows the exact same values for all fields. Lastly, (trying [URL] .....) I re-loaded the linetype for PHANTOM2.
I'd like to have them both appear the same, if possible.
I'd like to make a custom linetype that is a the standard DASHDOT linetype, but with a small circle drawn on the ends of the line or arc (and only at the ends).
View 4 Replies View RelatedI loaded a linetype (.lin file) in ACAD 2010 and it came out wrong. I would like to permanently remove it from ACAD(where it cant be seen when you go to load another type of line), how do you do that?
View 7 Replies View RelatedI am trying to custom a new linetpye as below, with an arrowhead at the beginning and at the end but point to opposite direction. This is easy to build such linetype in Microstation, but I am new in autocad.
View 1 Replies View RelatedI am trying to create a custom linetype with solid circles at a specified distance along the custom linetype (see attachment). I have tried using a shape, the special Wingding character but cannot get the result I want. I've tried the hatching method, again with no luck. I've went through the discussion groups, online content, etc. but cannot get it to generate the line the way I want. I see a few people that have been successful but I cannot get it to work.
View 9 Replies View RelatedI created a linetype using text shape. Let’s say, that my line is only AAAAAA. Now when I apply this linetype in the drawing, the lines always have a small, line before and after the characters. Actually you see this: -AAAA- . How can I delete or hide the start and end lines.
View 2 Replies View RelatedI have a drawing (attached) with the following settings: LTSCALE = 1, MSLTSCALE = 1, PSLTSCALE = 1.For some reason the linetype is not scaling based on the annotative scale. It will update correctly if I change the LTSCALE but for some reason it wants to ignore the MS and PSLTSCALE variables.
As a note, the drawing was converted from a Microstation drawing and the linetype is a converted Microstation linetype.Is there something in the linetype that is doing this.
I think the MSLTSCALE / PSLTSCALE / annotation scales are fantastic to use when showing the details / plan at different scales (1:100 / 1:50 / 1:1) without having to use LTS to show different scales. I am using AutoCAD 2011.However, I noticed one snag. In the old Autocad before the MSLTSCALE was introduced, I used a shape linetype - a sino shape which I created for insulation in the wall cavity as well for curtain in the interior plan layout (with MSLTSCALE set at 0 and LTS set at scale factor at 1 and use paperspace scaling at desired scale.
When MSLTSCALE / PSLTSCALE are set at 1, the sino linetype will of course changed accordingly to different scale .I prefer to keep the MSLTSCALE / PSLTSCALE at the default 1 with LTS at scale factor 1 as I want the dashed linetypes to updated accordingly to the scale. At the same time I don't want to have the sino linetype changed (keeping the sino linetype at constant 100mm width). Is there a way to control one linetype at MSLTSCALE = 0 and keep the rest of the linetypes at MSLTSCALE = 1.
I don't think it is possible as MSLTSCALE is for general setup. Instead I would have to forgo using the sino lintype and used a block instead. But a way to control an individual linetype scaling.
To adjust the line type scale until dashed line appear as fine or coarse as desire,Type:-
Ans - a) LSCALE b)LINESCALE c) LTSCALE d) None of the above.
I'm sure I had linetype scaling updating automatically after a change of viewport scale - perhaps it was a previous release of AutoCAD. Why must I now keep pressing REGENALL to update the linetype scale?
View 2 Replies View RelatedMy properties palette doesn't have a field for linetype? I swear there was one there previously (under the general section)?
View 4 Replies View RelatedI am trying to create a linetype from the following:
FENCELINE3,Fence line ----X----X----X----X----X----X—
A,.5,-.2, ["X",STANDARD,S=.1,R=0.0,X=-.05,Y=-.05],-.2
I am getting a bad definition of FENCELINE3 at line 118 of C:Program FilesAutoCAD 2010UserDataCacheSupportacad.lin
Invalid number or bad continuation.
When applying a linetype to a curved line (e.g. polyline, arc, circle), the direction of the linetype reverses at every change from convex to concave. The error does not occur with straight segments. The REVERSE command does not work, because it will change the direction of the entire polyline. In fact, the reverse command does not even recognize and arc.
View 3 Replies View RelatedI am wondering if it is possible to make a linetype that is essentially two continous lines (Or small dashes lines) overlayed atop one another. The purpose for this is to create a shadow effect (we use this for text on aerial imagery). The bottom line would be a thick white/black line and the top line would be the opposite so it stands out.
View 1 Replies View Related“Linetype” file” and “measurement” value are not listed in the properties pane..I’m wondering why the AutoCAD
doesn’t show the “linetype” file (acad.lin/acadiso.lin) from which a particular linetype is takendoesn’t show the “measurement” value (0 or 1) when a particular object is drawn Why these properties are not set on the property pane?
I have one drawing per file at model tab. When I need to plot a multiple page file, I use:
Print > Batch Plot.
The problem is that I have to set plot configurations ( plot style table, plot area, paper size, etc) in each file before use Batch Plot.
Now I received 722 files with a wrong Plot Style Table. For this time I change the associated *.ctb file at Plot Style folder, but I will need to associate the right *.ctb to each drawing. It's also common to have to change other properties.
How can I copy a linetype definition from a drawing to the linetype definition file?
View 7 Replies View RelatedHaving a problem with AutoCAD 2012. When trying to plot the dwg, suddenly this message come up. Even after install Service Pack 1, it still doesn't solve the problem. Attach is the image for your reference.
I've tried to search for the solution but cannot find any with StackHash_f960.