AutoCAD 2010 :: Non-Repeating Linetype
May 17, 2013
Is it possible to creat a linetype that doesn't repeat.
What I'm after is a line consisting of:
Long Line
Space
Short Line (roughly 1/3 length of long line)
Space
Long Line
( ______ __ ______ )
But that is all I want to see, regardless of the distance between the start and end points. I use this a lot for laying out joists.
I know I could make a dynamic block of it, but that would mean streaching every line between the two points.
View 2 Replies
ADVERTISEMENT
May 16, 2012
I am wanting a soultion to a problem I am having when trying to have a combination of linetypes I either want psltscaled or not in a view port.
I.e. I want services linetypes to use psltscale = 1 and I want my linemarking linetypes to use a psltscale = 0, as I need the linemarking linetypes to show in the viewport at the original size they were created at but not the services linetypes as they look horrible.
View 9 Replies
View Related
Apr 25, 2013
I want to create a linetype just like this but cant seem to get it right..
View 3 Replies
View Related
Jul 1, 2013
Is it possible to create a linetype that has a shape that and spacing between the shape that would always be the same? I want to create a linetype that would have a shape that would always be 2 feet across with 20 feet between each occurance whether its in a 20 scale view port or a 60 scale view port.
View 4 Replies
View Related
Feb 4, 2013
I have an file where the linetype of a line will modify on print. The linetype will only 'move' when the endpoint of the line is outside the viewport.
I have attached a pdf to show what is happening along with the drawing file.
Another interesting thing is that when I change thickness of the linetype, it also moves.
I have tried recreating the polyline, reversing the polyline direction, auditing the drawing, but nothing.
View 1 Replies
View Related
Dec 13, 2011
Same linetype and linetype scale but different appearance!
I got the linetype Dot2 with linetype scale 0.02
The linetype Dot2 with 0.02 linetype scale appears in two different ways!
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 9 Replies
View Related
Nov 19, 2012
in layer translator the linetype scale does not work.
when i use layer translator, the resulted drawing comes with all layer ok but the linetypes scale does not.
View 1 Replies
View Related
Mar 26, 2012
Trying to set a Phantom line as the property line and also use dashed lines (ACAD_ISO03w100)
I can mess with the ltscale and make it so one or the other reads properly, but never both. The Phantom displays correctly at ltscale: 1, the dashed lines display when ltscale is .1 they are on different layers
View 8 Replies
View Related
Jul 25, 2012
How to compile a "master" .shp file that would include the coding for all of my shape files for custom linetypes. I did this years ago for a specific set of linetypes but I can not remember how I did it.
I know ACAD has the linetype.shp file that includes coding for ACAD supplied custom linetypes.
I think I remember inserting all of the shapes into a drawing and somehow compiling the *.shp file. Is that how it is done?
View 1 Replies
View Related
Aug 12, 2013
How do I set up a dwt so that linetypes appear the same no matter what the scale of the viewport. I tried AutoCad help but the recommended fix if I am reading it correctly is psltscale set to 1. That didnt work. We normally set our ltscale to 0.5. Should the scale of linetypes be controlled by the scale of the viewport? Isnt the scale of the viewport supposed to be multiplied by the ltscale so that the linetypes always appear the same no matter what the veiwport scale?
View 9 Replies
View Related
Oct 5, 2012
I work very closely with a customer, and have been asked to implement their drafting standards for a dwg file they received from another vendor. I have attached two drawings, 1 (their vendor's) and 2 (mine, in progress). When opened, I notice the linetype scale *appears* different between the drawings (note the differences within "LINE LEGEND" section of both drawings). It *appears* as though Drawing 2 has double the linetype scale of Drawing 1.
I realize that within Drawing 2 I could set the LTSCALE variable to 0.5, but that seems like a work-around and may cause problems with other aspects of the customer's drafting standards in the future.
I've already confirmed that both drawings have the same values for LTSCALE, PSLTSCALE, MSLTSCALE, CELTSCALE. I've also already confirmed that, for the "PACKAGED EQUIPMENT" entry with the legend, the properties dialog box shows the exact same values for all fields. Lastly, (trying [URL] .....) I re-loaded the linetype for PHANTOM2.
I'd like to have them both appear the same, if possible.
View 2 Replies
View Related
Mar 26, 2012
I'd like to make a custom linetype that is a the standard DASHDOT linetype, but with a small circle drawn on the ends of the line or arc (and only at the ends).
View 4 Replies
View Related
Apr 24, 2013
I loaded a linetype (.lin file) in ACAD 2010 and it came out wrong. I would like to permanently remove it from ACAD(where it cant be seen when you go to load another type of line), how do you do that?
View 7 Replies
View Related
Feb 16, 2012
I'm trying to set the plot styles to use specific linetypes for given colors. The theory is that using adaptive linetypes, then lines that are color 50 for example will always display dashed regardless of the length. This seems to work great, except that I'm not happy with the linetype scale (dashes plot too long). Obviously changing linetypescale does not work because adaptive is turned on. So the only solution I could think of was to change the actual linetype definition, but the acad.lin file does not seem to be related to the linetypes shown in the CTB editor (or is it?). How to change the linetype definitions that are linked to the ctb style?
View 8 Replies
View Related
Jan 8, 2013
I am trying to custom a new linetpye as below, with an arrowhead at the beginning and at the end but point to opposite direction. This is easy to build such linetype in Microstation, but I am new in autocad.
View 1 Replies
View Related
Jul 24, 2013
I am trying to create a custom linetype with solid circles at a specified distance along the custom linetype (see attachment). I have tried using a shape, the special Wingding character but cannot get the result I want. I've tried the hatching method, again with no luck. I've went through the discussion groups, online content, etc. but cannot get it to generate the line the way I want. I see a few people that have been successful but I cannot get it to work.
View 9 Replies
View Related
Jun 22, 2012
I created a linetype using text shape. Let’s say, that my line is only AAAAAA. Now when I apply this linetype in the drawing, the lines always have a small, line before and after the characters. Actually you see this: -AAAA- . How can I delete or hide the start and end lines.
View 2 Replies
View Related
Oct 17, 2012
I have a drawing (attached) with the following settings: LTSCALE = 1, MSLTSCALE = 1, PSLTSCALE = 1.For some reason the linetype is not scaling based on the annotative scale. It will update correctly if I change the LTSCALE but for some reason it wants to ignore the MS and PSLTSCALE variables.
As a note, the drawing was converted from a Microstation drawing and the linetype is a converted Microstation linetype.Is there something in the linetype that is doing this.
View 6 Replies
View Related
Oct 19, 2012
I think the MSLTSCALE / PSLTSCALE / annotation scales are fantastic to use when showing the details / plan at different scales (1:100 / 1:50 / 1:1) without having to use LTS to show different scales. I am using AutoCAD 2011.However, I noticed one snag. In the old Autocad before the MSLTSCALE was introduced, I used a shape linetype - a sino shape which I created for insulation in the wall cavity as well for curtain in the interior plan layout (with MSLTSCALE set at 0 and LTS set at scale factor at 1 and use paperspace scaling at desired scale.
When MSLTSCALE / PSLTSCALE are set at 1, the sino linetype will of course changed accordingly to different scale .I prefer to keep the MSLTSCALE / PSLTSCALE at the default 1 with LTS at scale factor 1 as I want the dashed linetypes to updated accordingly to the scale. At the same time I don't want to have the sino linetype changed (keeping the sino linetype at constant 100mm width). Is there a way to control one linetype at MSLTSCALE = 0 and keep the rest of the linetypes at MSLTSCALE = 1.
I don't think it is possible as MSLTSCALE is for general setup. Instead I would have to forgo using the sino lintype and used a block instead. But a way to control an individual linetype scaling.
View 6 Replies
View Related
Dec 13, 2012
To adjust the line type scale until dashed line appear as fine or coarse as desire,Type:-
Ans - a) LSCALE b)LINESCALE c) LTSCALE d) None of the above.
View 4 Replies
View Related
Oct 25, 2013
I'm sure I had linetype scaling updating automatically after a change of viewport scale - perhaps it was a previous release of AutoCAD. Why must I now keep pressing REGENALL to update the linetype scale?
View 2 Replies
View Related
Apr 8, 2013
My properties palette doesn't have a field for linetype? I swear there was one there previously (under the general section)?
View 4 Replies
View Related
Mar 13, 2013
I am trying to create a linetype from the following:
FENCELINE3,Fence line ----X----X----X----X----X----X—
A,.5,-.2, ["X",STANDARD,S=.1,R=0.0,X=-.05,Y=-.05],-.2
I am getting a bad definition of FENCELINE3 at line 118 of C:Program FilesAutoCAD 2010UserDataCacheSupportacad.lin
Invalid number or bad continuation.
View 1 Replies
View Related
Jun 12, 2012
When applying a linetype to a curved line (e.g. polyline, arc, circle), the direction of the linetype reverses at every change from convex to concave. The error does not occur with straight segments. The REVERSE command does not work, because it will change the direction of the entire polyline. In fact, the reverse command does not even recognize and arc.
View 3 Replies
View Related
Feb 1, 2013
I am wondering if it is possible to make a linetype that is essentially two continous lines (Or small dashes lines) overlayed atop one another. The purpose for this is to create a shadow effect (we use this for text on aerial imagery). The bottom line would be a thick white/black line and the top line would be the opposite so it stands out.
View 1 Replies
View Related
Feb 25, 2012
“Linetype” file” and “measurement” value are not listed in the properties pane..I’m wondering why the AutoCAD
doesn’t show the “linetype” file (acad.lin/acadiso.lin) from which a particular linetype is takendoesn’t show the “measurement” value (0 or 1) when a particular object is drawn Why these properties are not set on the property pane?
View 6 Replies
View Related
Nov 14, 2012
How can I copy a linetype definition from a drawing to the linetype definition file?
View 7 Replies
View Related
Nov 6, 2013
This happened in the middle of dimensioning A drawing. Was adding tolerance and some text to some dimensions which usually looks like this.
1.500±.001" Turn Runner
But all of a sudden it started to look like this.
1.500" Turn Runner±.001" Turn Runner
Everything in the dim suffix field is repeated twice and I don't know why.
No variables were changed...I literally did one dimension that came out normally and the next one did this.
Now all dimensions do this. There is a single dimstyle with no daughter styles.
View 9 Replies
View Related
Jan 19, 2010
I currently use a full version of AutoCAD 2009. One thing I was able to do previously was repeat break at point by right-clicking and selecting the repeat function.
Now when I try to do that in AuctoCAD 2009, the repeat function will result with just a plain break instead of a break at point.
My question is, how do i get this functionality back so that I can repeat break at point as many times as I need to? I use this command many times back to back and hate having to go click on the button from the ribbon menu.
View 7 Replies
View Related
Feb 21, 2012
I have placedmy own Origin in the center of the screen. I am constantly using construction lines from this origin using the offset command with various offset lengths. What I am trying to achieve is to enter a numeric value and press enter on a continuous cycle. Without Selecting construction line, Offset, Distance, Select Line, Select side. I have tried using Macro and CUI in the manage tab without success. I understand the concept, but lack the knowledge to succeed. I have a nose bleed from continuously hitting a wall.
View 6 Replies
View Related
Apr 20, 2013
How to create the type of complex geometries in the links below.
I'm particularly interested in creating patterns/tessellations.
[URL] ....
[URL] ....
View 1 Replies
View Related