AutoCad 2D :: Complex Linetype Shape Versus Text Spacing
Feb 20, 2013
I have created a custom linetype using a shape & also added text. I have tried countless combinations to have a different spacing for the text, without affecting the frequency of the shape.
I want there to be no space between the shape, just repeating. But I want the text to display only once for every 4 times the shape repeats. Is this at all possible?
Every time I change the text spacing, I get huge gaps in the between the shape and it seems that their spacing cannot be independently controlled.
View 9 Replies
ADVERTISEMENT
Feb 17, 2008
I'm trying to create a linetpye .The line needs to be continuous with a solid(not hollow) circles at distances.This would be the same as FENCELINE1:
*FENCELINE1,Fenceline circle ----0-----0----0-----0----0-----0--
A,.25,-.1,[CIRC1,ltypeshp.shx,x=-.1,s=.1 ],-.1,1
but with filled-in circles.for example circles should be hatched or colored.An image of desired linetype is attached.
View 9 Replies
View Related
May 5, 2011
I am working with Autocad Map 3D 2009. I just recently switched computers and I put all my custom shapes into the correct folder on my new computer (program files/autodesk/support) and my acad.lin in the correct folders. My custom complex linetypes were then working just fine.
Today, I open the drawing and all my custom complex linetypes are now dashed. I've checked my shape locations, I've checked my msltscale and my psltscale, tried reloading the linetype (it reloads and doesn't give me an error message about it being invalid). Why are my linetypes doing this???
View 1 Replies
View Related
Sep 15, 2005
Shape making from multiple complex shape and path layers?
so i have few layers(all vector paths and shapes) .
now how to make a shape from all of that. every new shape is layer for itself. I need it for logo.
View 7 Replies
View Related
Sep 23, 2011
I have a problem regarding a mechanical design. I want to make a pin move around a complex shape, always tangent to the sides of the shape. The point is not to have it animated, but I need the constrain so I can further work on the mechanical design.
I've attached a photo and the files.
View 1 Replies
View Related
Apr 17, 2013
Is it possible to run force analysis on my part in Inventor? I have used the force analysis before, but never for something so complex in shape. My main issues are constraining the base of the part and applying forces. I tried thickening sections of the part in order to apply a force/constraint, but now Inventor won't recognize the thickened parts as connected to the main body.
On a side note, it won't let me attach my file, which is 122 MB. Is it too large?
View 7 Replies
View Related
Jul 25, 2012
How to compile a "master" .shp file that would include the coding for all of my shape files for custom linetypes. I did this years ago for a specific set of linetypes but I can not remember how I did it.
I know ACAD has the linetype.shp file that includes coding for ACAD supplied custom linetypes.
I think I remember inserting all of the shapes into a drawing and somehow compiling the *.shp file. Is that how it is done?
View 1 Replies
View Related
Dec 8, 2011
I need a custom linetype that includes a shape - a rectangle or a star.
How do I define this "shape" in my custom linetype?
View 2 Replies
View Related
Jan 29, 2014
I'm looking to create a linetype where I can incorporate a specific arrow shape. The best way of going about this? The application is to show on general layout plans the escape route with a polyline with the incorporate arrow.
Until now I have been drawing a standard PL then adding the arrows manually .
View 4 Replies
View Related
May 29, 2012
I am trying to create a complex shape with an opacity map. To keep things simple, consider an egg shape with heagon shaped windows. I have tried to create a solid / shell with boolean cut-outs, but getting these windows at the right angles is becoming very difficult.So, I tried a CV Surf with an opacity map. This allows for the windows to work well, but there is no depth to the surface.Is there a way to add depth to a CV surf object? Also, I want the map of the interior to be different from the exterior. A solid will have a ton of polygons, making mapping a huge time sink.
View 1 Replies
View Related
Nov 27, 2012
I have a client which wants me to change the color of his products - from bronze to chrome and vice versa. I'm specialized in web design in Photoshop, I tried different techniques but didn't manage to get a good enough result. I have to add that it's not only 1 product, but up to 100. Here are the images: [URL]....
View 3 Replies
View Related
Jan 8, 2012
I have a complex shape that has a cutout to the edge and I would like to apply a radius.I can, of course, play with nodes etc. but is there an easy way to do this? I use combine and weld etc. but the problem is ensuring the edges touch on both faces.
View 4 Replies
View Related
Sep 27, 2012
I have a topo map in max, and I'm trying to raise and sink parts of it to make sidewalks and parking lots. My thought was to import line objects from dwg files, shape merge them onto the terrain, change the material number, then extrude. The problem is that shape merge doesn't maintain the correct shape.
I've made sure that I'm in orthographic mode, looking straight down on the surface, but anywhere there's a curve it messes things up. Circles become irregular ellipses. Arcs become more convex or concave. Where I'm shape merging two different objects at different times, objects that had lined up, the curves are now different and they either overlap or no longer touch.
I'm assuming that it's because my terrain mesh is too complex, but I'm not sure how to get around that.
View 2 Replies
View Related
May 23, 2013
I've made a shape (attached image) and am trying to find a way to use it for a linetype. However, I'd like to have the left and right "blocks" filled (hatch or whatever) so that when used repeatetively in a linetype, the filled and open spaces will alternate. I may change it to be only 2 blocks or 4 - haven't decided yet.
I've made linetypes with simple line shapes, but never one like this.
I have exported the 3 polygons through the Map Drafting ribbon --> Export and then brought it back into CAD. This gave me 3 adjacent filled polygons (3 seperate objects) and I don't know how to show it as one shape entity, much less without the middle fill.
Is there another way I can accomplish this without the use of shapes?
Civil 3D 2012
Windows 7 Enterprise SP1
Dell Precision T3400
(Q9550 @ 2.83 GHz)
8GB RAM
Nvidia Quadro GTX 650 Ti BOOST
View 3 Replies
View Related
Jun 15, 2011
Using: Land Desktop Companion 2009
Issue: Imbeded text in Linetype is automatically orienting the top of the text toward the center of the arc. I have tried to "reverse polyline" to fix this, but the text will not change. Is there a line property that I am missing that will allow the text to orient itself as readable from arc Point of begining to the end?
View 2 Replies
View Related
Mar 5, 2013
Look at the picture attached.
Why does this happen? Every time I open a file where I changed paragraph spacing it always gets back to its default value of x1,00.
View 6 Replies
View Related
Jul 24, 2012
I am really new to AutoCAD and we are currently using AutoCAD 2007. I have managed to create a complex linetype with text. I have a DWG of the plan I need to lay utility cables on to. When I put a line with text into the model space, the text is really small so looks like a really small, continous line unless I zoom in until I can zoom in no more; I changed the scale so that the definition of the line and text was more visible (by changing linetype scale and lineweight) but when I go into the layout pages, the line just looks like a continuous thick line when I put the LWT on. If I return to model space and reduce scale and weight, it still looks like a continuous, thick line. The page size is A1..
View 4 Replies
View Related
Feb 28, 2013
What is the difference between Annotation Text versus the Civil 3D Lables? Do you have more control over the annotation text? Do lisp routine work better for annotation text than the Civil 3D Labels?
I have a routine that will create a quick leader and text from the object layer that it selects.
Layer EX-PAVEMENT ----> the quick leader call out would label it as Existing Pavement.
View 3 Replies
View Related
Dec 6, 2012
I am a beginner in autocad. What is the difference between annotative and associative text?
View 1 Replies
View Related
Apr 25, 2013
Is there any way to control the line spacing when you have text within a cell of a table? Specifically I want to change the spacing to act similar to 'EXACTLY 1.0' like in the MTEXT editor. Please see the included dwg.
View 3 Replies
View Related
Nov 26, 2013
I want to engrave the text 'TEST' all the way around this clonal object. When I use the emboss tool, selecting the option 'wrap to face,' it gives me an error message that the "face selected is not tangent to the profile plane."
I am using a work plane that is offset from the XY plane. I included a screen shot and the file that I am using (Inv. 2014)
View 2 Replies
View Related
Jun 26, 2013
When i write Mtxt i have to use accents on some vowels. But when i put the accent, the space line between the 2 text line gets thicker.Then, i have text with various spaceline height, i don't really like that.
Is there a way to stop autocad from giving extra space when i use an accent to get equal space lines between text?
View 3 Replies
View Related
Jun 7, 2012
Currently in process of a quick fix, trying to create a linetype that should place a number in between the lines.
*One, Places 1 in between lines A,5000,-50,["1",CompatecStandard,U=0,Y=-125],-150
That's as far as I've gotten and it pretty much does what I want it too, but right now it is set to 5000mm before it makes a gap with a number. I would like that gap to be dependent on the length of the line... is that possible?
For example, if the line is only 4000mm I want the gap to be after 2000 instead of 5000.
AutoCad LT 2014
View 2 Replies
View Related
May 10, 2012
I am having an issue with the "upright" script in my ltype descriptions. Apparently it works the way it is supposed to and not the way I want it to.
The upright is set to 0 which orients the text in linetypes to be shown as "upright" to the model space. In most design cases; not an issue, but I am designing construction plans along a roadway and as such, north is not always "upright" to my viewport. Is there a script (ie ...,u=v],... or ...,u=vp],...) that will orient my text based on the line displayed in the viewport?
View 9 Replies
View Related
Jun 4, 2013
I'll start by saying that I'm using Civil 3D 2012...I've made a custom line type and am having issues with it. Basically, I'm trying to get the text (Green line with 4's) to flip around from it's current orientation, see attachment. I have already tried the REVERSE and MIRROR commands, with no success.
View 6 Replies
View Related
Jul 23, 2013
I'm trying to center text in a linetype, but at certain angles the text will no longer be centered.
Here is the linetype coding: A,1,-.25,["W",STANDARD,S=.2,U=0.0,X=-.1,Y=-.1],-.15
LINETYPE.jpg
Notice that the text on the vertical line are skewed the most.
View 1 Replies
View Related
Jun 27, 2011
If I place a dimension and have text above and below the dimension line (using X), and then grip edit the dimension text to move it for space/clarity on plans, the text above and below the line will mysteriously move closer to the line. If I have backgrounds applied to the text, which I normally do, the backgrounds will cover the line. Even without the background, it looks odd next to other dimensions that were not grip edited.
Civil 3D 2011
Windows 7 x64
View 1 Replies
View Related
Feb 18, 2013
How do I create a linetype with text that is similar to the waterline linetype or sanitary sewer linetype?
View 3 Replies
View Related
Jan 8, 2013
I made a custom linetype to represent a pipeline. The line is abbreviated by 5 letters. My problem is when I reach and curve in the pipe (an elbow), the text string does not follow the curve. It remains straight for the remainder of the text. Is there a way (autocad 2013) to have the text follow the path of a curve?
edit: I saw one similar topic from 2008 in this thread: [URL] and the best response there is the one posted by eldon where you break the code down to each letter. Still, the picture in eldon's post makes the text a bit jagged. Have any changes been made to AutoCAD since this post that make this easier?
View 0 Replies
View Related
Mar 12, 2013
I am trying to create a linetype(actually multible linetyes) for Civil drawings. I need the line type to have the following text..........12" W. I have tried to edit and existing linetype but for some reason the string does not seem to like me using the inch (") symbol. Any proper way to generate this linetype and I should be able to edit it to get all the other line sizes I need.
View 5 Replies
View Related
Feb 18, 2011
I made a custom line type called EX (for existing pipes) which looks a little bit like this: - - - EX - - - EX - - - EX - - -
Line works great when I draw from left to right. However, when I draw a line from RIGHT to LEFT, the text displays upside down a little bit like this: - - - X3 - - - X3 - - - X3 - - - ("3" representing the mirror image of "E")
Same applies when drawing from bottom to top, or top to bottom. I totally understand the behavior here, and TBH I think it's OK it behaves that way.
Let's say I'm drawing existing water pipes going in all directions with a polyline. Is there a way to make the text display upward no matter what direction the pline is going?
View 9 Replies
View Related