What is the difference between Annotation Text versus the Civil 3D Lables? Do you have more control over the annotation text? Do lisp routine work better for annotation text than the Civil 3D Labels?
I have a routine that will create a quick leader and text from the object layer that it selects.
Layer EX-PAVEMENT ----> the quick leader call out would label it as Existing Pavement.
When publishing a sheet set some of my annotation labels are not showing up. If I open the sheet, they are there, set to print and everything is correct. If I print just that sheet, everything is fine. Only happens in publish. It's almost like the publish command isn't giving the drawing enough time to open and load everything before printing.
View 9 Replies View Relatedam in the process of setting up a standard file for all designers to use our local office. This file will have most of the styles created for profiles, alignments, surfaces, profile views, etc... as mostly specified by the customer and industry standards.
I am having trouble maintaining the correct annotation scale in the viewport in paperspace and when plotting.
The attached word document has 3 figures. Fig 1 shows the correct viewport scale and correct annotation scale. Fig 2 shows how the annotation scale abruptly changes during the plotting process. This abrupt annotation scale change sometimes happens during the regen process or when I switch from layout to model space and back to layout.The annotation scale goes from 1:1 to 1:40 just as in the viewport. This change in annotation scale is not supposed to happen because I want to preserve a certain plotting height for my text versus a viewport scale by using various annotation scales.
I have researched the procedures for annotation scale and have not found any info related to this "abrupt change in annotation scale".
Curiously , this abrupt change in annotation scale does not happen if the text does not belong to any styles within Civil 3D. Stand alone text stays at the correct annotation scale and is not affected in the same way.
I am attempting to create some blocks, which consist only of text. The issue I am having is with the option to make the block annotative. I have set the text within the blocks to annotative, and it seems to work, but when I reenter the block editor and highlight the text, it still says "Annotative - NO".
View 2 Replies View RelatedIs it possible to cusomize "Section" lables to include bubbles? I can't find any command anywhere.
View 2 Replies View RelatedI am trying to XREF my C3D Design file that has my profiles and sections in it into a drawing with a title block and viewport. Everything is fine in Model Space...but when I create the viewport in Paper Space none of the annotative text of the profile/section shows up...or is microscopic.
View 8 Replies View Relatedwe have this issue that has affected us in Revit 2011 and 2012. For many of our families we have a 3D object, a 2d representation of symbolic lines, and then some editable text/annotation:
- The text is a Generic Annotation annotation family, with a single label, set to display the parameter "Text Frame"
- This family is then inserted into the family of the specific object being created, with, under label's Type Properties, the "Text Frame" of the label being linked with a "Text" parameter in the object family.
This seems to work all fine and dandy, however, we're getting an interesting problem: after working in the file for a while some percentage of the annotation on these families disappear in a view. Sometimes it's just a few, sometimes half, sometimes all of them just go away (everything else, including the symbolic lines, are still there). If you close the file and re-open, they will re-appear. If you nudge them, they will re-appear. Other views may still have them, at least for a time... then they too will dissapear.
This happens both on screen and, dangerously, during printing. You print a whole set, only to discover much of your annotation for objects is gone... (not to mention the cost and waste of trees when you re-print).
Is this a known problem (search only turned up one thread on this), or is there another way to do what I want (have editable annotation on a family) that avoids this issue and I stubmled onto the improper way of doing it?
Moving a text box or section label and it disappears then zoom extents and everything disappears. save the file close reopen and everything back to normal.
I have tried exporting to a different AutoCad year (2010) but the same issue is still occurring.
I am labeling structures and need to use the station & offset for the street alignment not the alignment for the pipe network. It works great for the station but the offset is not working properly. It reads 0 as though it's reading the alignment for the pipe network. I've tried copying a label and adding reference text, creating a new label from scratch, putting 2 pieces of reference text in (1 for the station & 1 for the offset), and just doing the offset in the reference text instead of the station & offset...none of those have worked.
View 5 Replies View RelatedI am in the process of modifying our current company standards to conform to another set of standards. The main change is switching from "simplex" font style to "Tahoma".
Simple in theory but problematic in execution, our main alignment label style "GEO-LABL", used for P.O.T, PC, ect. utilizes an underlined reference text object in order to control the length of the line under the call. The base insertion places the call perpendicular to the alignment, when dragged to the left or right it switches to stacked text plan readable. Works like a champ with the "simplex" text style - 1.jpg see attached.
Now simply changing the font to "Tahoma" - 2.jpg the larger you make the text the larger the gap.I am trying to stay away from adding a line for the underline due to the difference in lengths needed when the call gets longer or shorter based on alignment name or stationing.
I am trying to do centerline stationing but the texts are coming out too small and the tick marks are not showing up.
View 2 Replies View RelatedWhen I have my alignment labels and plan view text align to the layout view in Paper Space they plot out very bold.
I am using Style: Swis721 BT-Italic. I use that style in the profile for labels and in plan view. When I plot out the sheet the profile view plots good but the text that was aligned in the plan view is very bold.
When I am trying to label an object, surface slope, elevation or lot line distance my text reverts back to layer 0. I have checked the Label style composser and have everything that I see set to the layer I want it on. When creating the label I am even physically on the proper layer but when I make the label it still goes to 0.
View 1 Replies View RelatedSuppose you have an existing structure that you are going to tie into with a proposed pipe.
We label existing structures with smaller text and a different color (as opposed to proposed labels)
Is there any way to label the structure where the one single proposed pipe text is a larger text size with a different color, as shown here?
The background mask does not align with text in curve labels with the "allow curve text" set to true. See Attached.
I found old posts with this problem for version 2009 and older. Is it still a problem in 2011/12/13?
(running C3D 2012 sp4, Win7 64bit, 8GB)
I am trying to create a surface rise:run slope label for our company template file. I have it set using the default values that I want. But right now the text is just 1:1...where we want it to read 1V:1H.
how I can keep the label dynamic to the surface, but put the V & H in the label after the values.?
I think it is normal to want a style showing stationing, speed design stattions, etc.But.... Radii of curves ? Clothoid parameters ?
Why is the reason Autodesk developers think that designers dont want to see this information instead of "add labels, aligments, multiple segments,. etc ....
(aligment by aligment ...... of a whole project ?
Civil 3D (2013)
I'm having trouble with paper space labels. When i zoom in and out to adjust my viewport, the scale looks fine. Then when i go to plot preview all text are enlarged. Then when I cancel I go to paperspace and labels remain large.
View 9 Replies View RelatedModifying the point size/text size assigned at particular annotation scale,
I’m wondering how the point size/text size assigned at particular annotation scale can be modified.
For example, in the attached screenshot, the point size assigned at the annotation scale of 1/1000 is big and I wanted to make it a bit smaller at that scale.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
How do I modify the leader for station and offset labels to underline the top line of text?
View 3 Replies View RelatedI am a beginner in autocad. What is the difference between annotative and associative text?
View 1 Replies View RelatedI have a drawing in metric but I want the results in feet and inches, do I draw it in metric and have Autocad spit out a feet and Inches drawing, is that even possible. Or do I do the conversions up front and explain to the client that he will get his metric drawing back in feet and inches.
Second part, if the drawing is in metric do I open the Autocad Civil 3D metric icon or does it matter. Where I can read up on why there is a metic and imperial Autocad icon?
what is the main advantages and disadvantages of these two programs.
Because i actually want to focus of someone of these two programs
I have created a custom linetype using a shape & also added text. I have tried countless combinations to have a different spacing for the text, without affecting the frequency of the shape.
I want there to be no space between the shape, just repeating. But I want the text to display only once for every 4 times the shape repeats. Is this at all possible?
Every time I change the text spacing, I get huge gaps in the between the shape and it seems that their spacing cannot be independently controlled.
What I have is a shape files that contains the road centreline of a city I am working on. And that shape files also have a data of its road name etc.
I know how to do it as FDO (using map connect). But what I require is an autocad text entity.
I can save the map as a drawing. But what I only want is just a number of road names and they are not adjacent or near to each other so map filtering is not recommended.
So what I did, I add the shape files using map import command and added the road name data. And then, I used the command Annotation and do the "define annotation" and "insert annotation". From here, I am doing fine. I created a text/block annotation that will extract the road name on the imported centreline on the line I just selected.
Now, my problem is, all the text are in just one direction (in my case they are all horizontal). I tried playing the "rotation expression" but still without luck.
how or what "rotation expression" should I use to make the text parallel/along the centreline.
I have a site survey which has existing spot heights all over it using MICRO text. I am marking in new spot heights so want a text style which is different, but not over powering.
Currently I am using Browallia UPC which looks like a good style match, however the text looks like its set to SUPER BOLD or something, because when I do a test print it visually dominates the entire drawing.
Is there a way of changing the "boldness" of a text style?
I am trying to standardize the company I just started with and I believe the Named Plot Styles are definitely the way to go, rather than Color Dependent.
Now, the question I have is when I created my Named Plot Styles, I created multiple styles with different lineweights. I plan on creating a base template with layers and have the lineweight based on the plot style. Is the correct way to handle it? Because we work for a certain large state DOT and they do things slightly different. They have only 2 named plot styles (existing, proposed) and change the lineweight directly in layer rather than the lineweight being dependent on the plot style. Now truthfully, there is no difference that I can see in the plot styles they created except for the description.
why a line drawn perpendicular to a spiral curve in C3D is not radial? If so, what is it perpendicular to? It can result in several feet of difference.
Also, labeling an alignment along a spiral using the automatic routines appears to run perpendicular (whatever that is - not radial).
Perhaps I'm not looking at the math right (its been awhile since spiral curves in college) but it seems to me that a curve of diminishing radius should be labeled radially. Is that not how C3D sees it?
The only other thing I can think is that C3D is running perpendicular to the small tangents or arcs that it puts in to approximate a spiral curve.
C3D - 2014, Sincpac Addon
im a mac user - whenever i go to do a linear dimension nothing shows up?
View 5 Replies View RelatedI have a set of drawings (19) with a lot of annotations, however I have to change them according to the original text:
Example: Return Air Drive by RAR, Sump by SMP etc. How is possible to select ALL the annotation with the same text and change them for the new ones? Every time that I select by text, either the MultiText or the Multileader objects are selected correctly but I can change only one at the time. Is there anyway to do the changing process in one shot for Text or Multitext with the same contents?
I'm trying to create a custom expression in a structure table that will list the "size" of the structure, wheter it be a circular or rectangular structure. My column simply states size and I want it to label 5' for a circular or 4'x4' for a rectangular (or whatever the specific sizes are). The thought was to create an IF function, but Structure Shape was not available to use in expressions (among other problems). Short of using the description field (tedious) as a workaround?
In this example - CB-104 is a rectangular structure and CB-106 is a circular. I'd like the CB-104 size to read 4'x4'.
Civil 3D 2014 SP1