I am attempting to create some blocks, which consist only of text. The issue I am having is with the option to make the block annotative. I have set the text within the blocks to annotative, and it seems to work, but when I reenter the block editor and highlight the text, it still says "Annotative - NO".
View 2 RepliesGot a problem with the attached drawing. (The drawing will eventually be used as an xref).
I have created a dynamic block that has a (multi-line) attribute applied. This attribute is linked to an annotative text style. The drawing contains annotation scales. I have applied some of these annotation scales to the attribute so that it shows at 4.5 in paper space.
The annotation scales (metric) contained in the drawing are "1:500, 1:1000, 1:1250, 1:2000, 1:2500, 1:5000, 1:10000, 1:20000 and 1:25000". All these annotation scales are applied to the attribute.
The block contains a look-up table of properties that when applied, size the block to be used as a boundary to the following scales "1:500, 1:1000, 1:1250, 1:2000 and 1:2500".
Now, for example, i wish to set the blocks to be shown at 1:2500 in the drawing. I select the blocks and make them 1:2500 in the 'look-up' table. However, if i wish to set the annotation scale to 1:20000 (because this will xrefed into a drawing plan of a scale of 1:20000) it incorrectly shows the size of the attribute. The attribute has a 1:20000 annotation scale set to it but its size is not correct. This happens for other scales but for other scales (1:25000 for example) its fine. Also, the attribute could move when switching annotation scales and appear near the 0,0 WCS.
The layout tab shows the annotation scale and viewport scale set to 1:20000 but as you can see, the text is not set to 4.5.
I would prefer to have the attribute linked to the block though. I have tried ATTSYNC and RESETBLOCK but the bug keeps coming back.
Using AutoCAD 2011.
What is the difference between Annotation Text versus the Civil 3D Lables? Do you have more control over the annotation text? Do lisp routine work better for annotation text than the Civil 3D Labels?
I have a routine that will create a quick leader and text from the object layer that it selects.
Layer EX-PAVEMENT ----> the quick leader call out would label it as Existing Pavement.
I am trying to XREF my C3D Design file that has my profiles and sections in it into a drawing with a title block and viewport. Everything is fine in Model Space...but when I create the viewport in Paper Space none of the annotative text of the profile/section shows up...or is microscopic.
View 8 Replies View RelatedIs there a way that I can create a block with text ('A') and when I insert the block and populate the block another block block will update also? I am wanting to create a block for x-sec flags, and detail callouts that update their detail titles.
AutoCAD Civil 3D 2012 SP4
Windows 7 (64)
Modifying the point size/text size assigned at particular annotation scale,
I’m wondering how the point size/text size assigned at particular annotation scale can be modified.
For example, in the attached screenshot, the point size assigned at the annotation scale of 1/1000 is big and I wanted to make it a bit smaller at that scale.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
is it possible to remove the annotation from a block with attributes. Make it non annotative?
View 9 Replies View RelatedIs it possible to have a dynamic block with text which, when inserted into a drawing, will show the text orientation matched to the layout? I have a non-dynamic block which is simply a donut and a piece of text. When I insert it into a drawing, the text orientation will change to suit the orientation of the layout. I created another block with the same entities but I also added a couple of lines extending out from the center of the donut. I added stretch and rotation actions in order to rotate and stretch the lines. I also gave the block visibility states so that either one or two lines would appear (the block is a utility pole,by the way, with the lines representing guy wires). When I insert the dynamic block into a drawing, I cannot get the text to match the orientation of the viewport. I've tried changing different combinations of settings but the text won't appear horizontal.
The two blocks I mentioned above are inserted into one file with a number of other blocks. When I check the properties of the non-dynamic block, the "match orientation" is set to YES. I cannot, however, change the "match to orientation" setting to YES on the dynamic block. Is this simply because it is a dynamic block or am I missing something? I don't create a lot of dynamic blocks and therefore I am not a wizard at it so I am assuming I am doing something wrong.
Annotative block moves when annotation scale changed,
The solution for this problem is mentioned in the link below but sounds not to be useful:
[URL]....
I got a block that contains an attribute (attached) and created on layer zero while the current annotation scale is 1:100. As this annotation scale is changed (say to 1:200 or 1:50) this block moves from its original place to another one (as shown in the attached screenshots).
Is it possible to have a dynamic block with text which, when inserted into a drawing, will show the text orientation matched to the layout? I have a non-dynamic block which is simply a do-nut and a piece of text. When I insert it into a drawing, the text orientation will change to suit the orientation of the layout.
I created another block with the same entities but I also added a couple of lines extending out from the center of the do-nut. I added stretch and rotation actions in order to rotate and stretch the lines. I also gave the block visibility states so that either one or two lines would appear (the block is a utility pole,by the way, with the lines representing guy wires). When I insert the dynamic block into a drawing, I cannot get the text to match the orientation of the viewport. I've tried changing different combinations of settings but the text won't appear horizontal.
What I have is a shape files that contains the road centreline of a city I am working on. And that shape files also have a data of its road name etc.
I know how to do it as FDO (using map connect). But what I require is an autocad text entity.
I can save the map as a drawing. But what I only want is just a number of road names and they are not adjacent or near to each other so map filtering is not recommended.
So what I did, I add the shape files using map import command and added the road name data. And then, I used the command Annotation and do the "define annotation" and "insert annotation". From here, I am doing fine. I created a text/block annotation that will extract the road name on the imported centreline on the line I just selected.
Now, my problem is, all the text are in just one direction (in my case they are all horizontal). I tried playing the "rotation expression" but still without luck.
how or what "rotation expression" should I use to make the text parallel/along the centreline.
I have a site survey which has existing spot heights all over it using MICRO text. I am marking in new spot heights so want a text style which is different, but not over powering.
Currently I am using Browallia UPC which looks like a good style match, however the text looks like its set to SUPER BOLD or something, because when I do a test print it visually dominates the entire drawing.
Is there a way of changing the "boldness" of a text style?
Is is possible to have an attributed block in a marker style or note style? I would like to have editable text upon insertion of the marker or text? I have tried unsuccessfully to get it to work. Does the fact that C3D displays the marker and note as objects prevent it from being editable? Is there a workaround?
View 1 Replies View Relatedhow to make make block attributes text visible next to my blocks?
View 4 Replies View Relatedim a mac user - whenever i go to do a linear dimension nothing shows up?
View 5 Replies View RelatedI have a set of drawings (19) with a lot of annotations, however I have to change them according to the original text:
Example: Return Air Drive by RAR, Sump by SMP etc. How is possible to select ALL the annotation with the same text and change them for the new ones? Every time that I select by text, either the MultiText or the Multileader objects are selected correctly but I can change only one at the time. Is there anyway to do the changing process in one shot for Text or Multitext with the same contents?
I have created section sheets in C3D 2012. My sections look fine in model space and my template comes in in paper space with my template and the proper viewport (viewport scale is 1:200). My annotation scale in model space is 1:250 and everything looks fine. My problem is, in paper space, the sections themselves looks fine but the annotation is way out to lunch (see attachment). I've tried playing with the scales but can't seem to find a solution.
View 1 Replies View RelatedI am using version B.219.3 (UNICODE) of Autocad Civil3d 2008 with service pack 2 loaded.
I am putting together some plan and profile sheets for a civil roadway job.
The annotation scale setting of the text in the profile xref and alignment xref is being ignored in the sheet file viewports. This text should be appearing at 1:40 scale, automatically, same as the viewport scale, but they are appearing very small instead. According to the way annotation scale is supposed to work in Autocad2008, this annotation should be appearing at the correct scale, automatically.
If I try to adjust the annotation scale to a ratio I think will work, it automatically adjusts the viewport scale to match whatever I enter for an annotation scale. What to try next.
Can files become corrupted in AutoCAD? If so, are there utilities to repair corrupt AutoCAD files?
Is there a setting to make it so when in VPMAX, that objects that are annotative will hold the scale of the viewport? it makes it very hard to place objects utilizing vpmax... doesn't make sense that it would change scales in a locked viewport.
C3D ver 2012
Win 7, 64bit
The properties palatte has both these scales listed. In theory, they can be different.I would love to be able to plot my drawing at 1:1000 with the civil objects & labels scaled to 1:500 so they don't overwhelm the plan. It would seem I should be able to simply set the viewport to have a standard scale of 1:1000 and annotation scale 1:500 and be done. But it doesn't work. It will always scale the annotative objects to the standard scale.
My workaround is to scale my sheet double size and plot it half size, to trick the Civil objects & labels.
I have been trying to export my annotation settings using the profile function on Autocad 2010. I can't get it to work, and I don't think this is the best way to achieve my goal. I've made a template file, but I don't know how to import it.
My goal is to, as quickly as possible, give 8 drawings the same annotation settings.
How to create a consistent annotation scaling of text and dimensions in a layout drawing in paperspace?
How to update dimensions/annotations scaling in modelspace to create consistant scaling of annotations for an entire drawing that has annotations that have different/inconsistent scaling (arrow size text heights all differ slightly)?
I have grasped the basics but since loading up CAD recently drawing lines does not seem to automatically snap to right angles like it had done before. Where abouts do I tweak this?
How to enlarge the annotation text and also limited the decimal points. At the moment i have readings of 0.0000 when 0.00 would suffice.
I made a simple block for a utility pole in plan view. It consisted of a donut with one string of mtext beside it. I had created it so that the text would orientate itself to be horizontal in each viewport regardless of the ucs angle. I later added a line for a guy wire and made the block dynamic with visibility states. Now I am unable to have the text orientate to a horizontal position in the viewports.
View 8 Replies View RelatedWhen publishing a sheet set some of my annotation labels are not showing up. If I open the sheet, they are there, set to print and everything is correct. If I print just that sheet, everything is fine. Only happens in publish. It's almost like the publish command isn't giving the drawing enough time to open and load everything before printing.
View 9 Replies View RelatedUnfortunately, a new project we have does not allow us to use annotative objects, so we are back to switching scale by creating several dimstyles with a varying dimscale (eg. Dim96, for 1/8", Dim48 for 1/4" etc.) Now I have created a button on the tool palette that brings in text and it allows me to set the size of the arrow by matching it to the dimstyle, but the text comes in always at the same size - 9" which is 3/32" for a 1/8" plan. The arrow changes but the text does not. I know I have to change the CANNOSCALE, but I can't seem to figure out a way of making it work so that the user will only need to switch the dimstyle from the pull down up at the top right and then be able to use a tool palette button that will bring in a text with leader with it's arrow head and text height matching the dimstyle scale.
View 4 Replies View RelatedWhen I change the annotation scale for selected text and leaders, most of it shoots into space. I have tried one at a time and many, all with the same result.
The text size looks correct, the leader looks fine, but the text x coordinate changes radically.
Changing from 1:1 to 1:15,000
Does this mean I have to relocate every leader text back to something normal, or am I missing something.
How do you set an object's annotation, say a line, to display a line's angle or bearing precision to the nearest 20th second.
Kinda like this for decimals:
0.000
0.00
0.0
But for degrees minutes seconds.
Also, I will require the seconds to hide if the nearest 20th second was a 00. I also need a leading zero for minutes if the minutes was under 10 minutes.
I have some files that are difficult to work with. Every time I try to change the annotation scale of an existing viewport or create a new viewport and set the annotation scale equal to something other than the default 1"=40' the file fatal errors on me.
Oh, Im on Windows XP 64 (8gb Ram and a Xeon) running C3D 2011 (all service packs and updates applied).
I want to add northing, easting and the elevation (point of the middle in the top layers) in section views annotation as you see in the picture, I tried my best but I couldn’t find how to do it.
View 3 Replies View RelatedNoticed that the Dynamic Blocks in the Annotation Tool Palette are missing? Let me rephrase that, in the Tool palette they show up, but the dwg's that they reference are missing. I have 4 users that are currently testing Civil 3D 2013 and all of them are missing the files.
I'm sure I could copy them from 2012, but still.