AutoCAD Civil 3D :: Annotation Scale Setting Is Being Ignored In Viewport
Sep 24, 2009
I am using version B.219.3 (UNICODE) of Autocad Civil3d 2008 with service pack 2 loaded.
I am putting together some plan and profile sheets for a civil roadway job.
The annotation scale setting of the text in the profile xref and alignment xref is being ignored in the sheet file viewports. This text should be appearing at 1:40 scale, automatically, same as the viewport scale, but they are appearing very small instead. According to the way annotation scale is supposed to work in Autocad2008, this annotation should be appearing at the correct scale, automatically.
If I try to adjust the annotation scale to a ratio I think will work, it automatically adjusts the viewport scale to match whatever I enter for an annotation scale. What to try next.
Can files become corrupted in AutoCAD? If so, are there utilities to repair corrupt AutoCAD files?
View 7 Replies
ADVERTISEMENT
Jun 26, 2009
am in the process of setting up a standard file for all designers to use our local office. This file will have most of the styles created for profiles, alignments, surfaces, profile views, etc... as mostly specified by the customer and industry standards.
I am having trouble maintaining the correct annotation scale in the viewport in paperspace and when plotting.
The attached word document has 3 figures. Fig 1 shows the correct viewport scale and correct annotation scale. Fig 2 shows how the annotation scale abruptly changes during the plotting process. This abrupt annotation scale change sometimes happens during the regen process or when I switch from layout to model space and back to layout.The annotation scale goes from 1:1 to 1:40 just as in the viewport. This change in annotation scale is not supposed to happen because I want to preserve a certain plotting height for my text versus a viewport scale by using various annotation scales.
I have researched the procedures for annotation scale and have not found any info related to this "abrupt change in annotation scale".
Curiously , this abrupt change in annotation scale does not happen if the text does not belong to any styles within Civil 3D. Stand alone text stays at the correct annotation scale and is not affected in the same way.
View 9 Replies
View Related
Jan 22, 2013
The properties palatte has both these scales listed. In theory, they can be different.I would love to be able to plot my drawing at 1:1000 with the civil objects & labels scaled to 1:500 so they don't overwhelm the plan. It would seem I should be able to simply set the viewport to have a standard scale of 1:1000 and annotation scale 1:500 and be done. But it doesn't work. It will always scale the annotative objects to the standard scale.
My workaround is to scale my sheet double size and plot it half size, to trick the Civil objects & labels.
View 2 Replies
View Related
Nov 26, 2012
I have some files that are difficult to work with. Every time I try to change the annotation scale of an existing viewport or create a new viewport and set the annotation scale equal to something other than the default 1"=40' the file fatal errors on me.
Oh, Im on Windows XP 64 (8gb Ram and a Xeon) running C3D 2011 (all service packs and updates applied).
View 3 Replies
View Related
Mar 29, 2011
I have a Viewport set to scale 1:100 and the Viewport is locked.The Annotation Scale displayed in the Viewport was 1:50.
When I clicked on the Synchronize Icon beside the Viewport Scale, the Viewport Scale changed, even though the Viewport was locked.
I was expecting the Annotation Scale to synchronize to the Viewport Scale.
Is this how it is supposed to work? and why does a locked Viewport Scale change?
View 2 Replies
View Related
Nov 1, 2011
How to set the annotation scale for a viewport in version 2012. I am not having any success finding what the variable is that needs to be set. Is this possible?? If so, how?
View 3 Replies
View Related
May 4, 2011
I am going through my viewports properties, changing the annotation scales that for some reason are different to the viewport scales (why you would want a different annotation scale i dont know)
When i make a viewport, with a certain scale, i can have it that the annotation scale automatically is the same as the veiwport scale?
View 2 Replies
View Related
Feb 25, 2013
Plot scale / Annotation scale / Viewport scale
I couldn’t figure out how these three types of scales are correlated with one another. For example, my drawing unit in AutoCAD is meter. And thus if I need to print my drawing with a scale of 1:200 then I set the annotation scale to be 1:2viewport scale to be 1:2plot scale 100:1000
if I need to print my drawing with a scale of 1:20 then I set the annotation scale to be 5:1viewport scale to be 5:1plot scale 100:1000
I couldn’t derive the rule that controls these three types of scales. This is also quite confusing when working with C3D! Sounds not the same logic is applied.
View 9 Replies
View Related
Mar 14, 2013
“annotation scale” on the lay out mode,
I’m not sure about the current “annotation scale” in case of lay out mode.
Annotation scale option is displayed only in the model and viewport mode but not in the lay out mode (attached)!
Based on what annotative objects living on the lay out but neither in the model (or viewport) are re-sized? At this mode, there is no option to choose the annotation scale?
On other words, how to choose the annotation scale in the lay out mode?
View 9 Replies
View Related
Oct 18, 2013
calculation a viewport scale of 1"=30'.
I've looked around and only find nearly what I looking for. For 1"=20' I have a value of 0.004167 Paper Units = 1 Drawing Units, but what is the formula to calculate 1/30"=1'-0"?
View 7 Replies
View Related
Nov 8, 2013
I have a drawing with several layouts, and in one particular layout only, I want the text to be smaller than the annotation scale would dictate (the viewport is 1"=300', but I want the text to display at 1"=50' annotation scale).
I tried selecting the viewport and changing the "annotation scale" property to 1"=50', then the "standard scale" property to 1"=300'.
Strangely, this seems to work for a bunch of MText objects I have in the drawing, but it won't work for an alignment station label group or for a particular linetype...for some reason, those two things insist on having their annotation scale equal to the viewport scale.
I tried messing around with the alignment station label group's style but couldn't figure anything out. As far as the line/linetype, I'm completely at a loss why that one wouldn't change.
View 3 Replies
View Related
Mar 29, 2012
I have created section sheets in C3D 2012. My sections look fine in model space and my template comes in in paper space with my template and the proper viewport (viewport scale is 1:200). My annotation scale in model space is 1:250 and everything looks fine. My problem is, in paper space, the sections themselves looks fine but the annotation is way out to lunch (see attachment). I've tried playing with the scales but can't seem to find a solution.
View 1 Replies
View Related
Apr 25, 2013
I am in the process of creating a .dwt to be used to generate plan & profile sheets. I have attempted to set the viewport type to either plan or profile (depending on the viewport) but it keeps resetting itself to "undefined".
View 1 Replies
View Related
Aug 9, 2012
I am working on automating page setups in model space and am looking for a way to set the plot scale equal to the annotation scale for scaled drawings with
(setvar "filedia" 0)
(setq a (getstring (getvar "cannoscale")))
(command "-plot" "YES" "MODEL" "" "" "" "" "" "" !A "" "" "" "" "" "" "_Y" "_N")
Setting the plot scale with !A causes the lisp to fail. However, when running each prompt through the command line individually, !A works fine. what is missing?
View 2 Replies
View Related
Apr 26, 2013
In c3d 2013 in the layout tabs when I hover over the annotation scale for the viewport it automatically changes the viewport like a "preview" of that scale. Is there a way to shut that off?
I ask because I believe it is altering my annotative point descriptions so I have to regen everytime my scale changes to see if the scale will work or not. A co-workers computer doesn't seem to preview and it works fine on their computer my preview appears to mess the annotation up on mine.
View 1 Replies
View Related
Apr 30, 2013
I double click in the viewport; under misc the annotated scale is in the list but not the standard scale. I want to set the scale for the viewport. Why doesn't the standard scale show as on option? Or, how to I set the scale in my viewport?
I'm using autocad LT 2008
View 6 Replies
View Related
Mar 15, 2011
I work in autocad 2010 and I draw in scale 1:1 . What an annotation scale is, moreover I have never used annotative objects in my drawings.
Nonetheless, when I try to plot a drawing, while I am in the model view, I choose the scale in mm/units, I select the plot area and when I press preview or plot, I get the message THE ANNOTATION SCALE IS NOT EQUAL TO THE PLOT SCALE. DO YOU WANT TO CONTINUE?
I press yes, I print it and the outcome is always a bit smaller than it should be.
When i am in the layout mode and I try to plot, I dont get this message. But I dont know how scaling works in this case. For example I want to plot in a A4 paper, scale 1:100. So I type 1000mm/100units, as I did in the model mode, but the result is wrong.
View 3 Replies
View Related
Sep 20, 2012
I do warehouse layouts: circles, squares and rectangles. I don't know a thing about these scales.
I get this message when i try to print D-size drawing. Received this drawing from outside source and need to print.
View 4 Replies
View Related
Sep 25, 2013
How to set the view port scale setting in autocad civil 3d i need to print using plan production template.
View 1 Replies
View Related
Feb 4, 2013
In paperspace the text are so out of scale and it only shows a specific area of the model view.the other viewports will have a realistic and 2d wireframe.
View 5 Replies
View Related
Nov 7, 2012
I have a drawing that is 50 scale. However my sections are all 10 scale. When I set my viewport to 10 scale, all my text is tiny. I can go into the style of the section view and change the size, but then it's too large in model space. Nothing I've tried will change the size of my text in paperspace.
Win 7 64BIT
C3D 2013
View 8 Replies
View Related
Feb 25, 2013
Modifying the point size/text size assigned at particular annotation scale,
I’m wondering how the point size/text size assigned at particular annotation scale can be modified.
For example, in the attached screenshot, the point size assigned at the annotation scale of 1/1000 is big and I wanted to make it a bit smaller at that scale.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 2 Replies
View Related
Apr 26, 2012
When I maximize a view port, then zoom in or out, the note labels change scale. I like the way C3D General Note Labels rotate and scale with different viewports, but is there a way to stop them from changing when you are just viewing by maximizing? I know that I can zoom first, then maximize and as long as I don't zoom again, the scale won't change, but this is not practical.
Win 7 64BIT
C3D 2013
View 1 Replies
View Related
May 7, 2013
I've got a drawing that contains an XREF. I've got a field reading the viewport object's Custom scale>Use scale name. However, whenever the drawing is loaded up all of the XREF's scales get imported. Since they contain the same scales, the field changes to read the XREF scale instead of the one it was set to. They are the same scale, but the field reads the XREF one first. Here is a screenshot showing what I'm talking about. Notice that the viewport's properties never show the scale as 1:20_XREF, but the field does.
I've been having to click "show all scales", do a SCALELISTEDIT, remove the XREFs, then do a UPDATEFIELD. I have to do this every time the drawing is open. It stays that way until C3D is closed. This becomes a problem when I go to PUBLISH a sheet set. If I haven't opened all the sheets in the sheet set and changed the scale list then they all get the wrong scale list shown.
Infrastructure Design Suite Premium 2014
Civil 3D 2014 x64
Windows 7 64-bit
6GB RAM
View 7 Replies
View Related
Aug 15, 2012
Setting the scale in a view port in paper space? 2010
View 3 Replies
View Related
Mar 14, 2012
I am using AutoCAD LT 2011. I am totally invested into annotative text, dimensions, etc. I specify the text size for paper space and AutoCAD adjusts the size according to the scale set for a viewport.
When I am adding annotation to a viewport, if i choose multitext, i can specify the text height as if it will be in paper space. In other words, even though i am INSIDE the viewport, I cah type 1/8" in the text size and the text is scaled appropriately. HOWEVER, when I create leaders with multi-text, that text size has to be typed in the old way. In other words, if my viewport is set to 1/2" and i want 3/32" high text, I have to type in 2-1/4". That's old school! What's going on with multileaders and the multitext as part it.
View 1 Replies
View Related
Jun 14, 2013
If I have an annotative object, with multiple annotative scales, but not the current one, AutoCAD will display it picking one of its annotative scales.
How do I find out which annotative scale AutoCAD is using to display an annotative object that has not the current annotation scale?
View 5 Replies
View Related
Sep 6, 2013
AutoCAD 2013 2D - when scrolling the viewport scale list, the viewport zooms with each scale instantly.
View 1 Replies
View Related
Jul 1, 2012
using ACADLT 2008
I wanted to use annotation scale objects long time ago, but I was scared…why?In the office no one knows what annotative objects are.
I already start to imagine the "curses" I'll get when they open my drawings in their computers and see that the dimensionin the drawing are not scaled the way they used to.
I was thinking about telling them a command that will do the magic.
View 5 Replies
View Related
Feb 27, 2013
I need a 1:50 annotation scale but it is not listed do I have to make this scale and add it?
View 2 Replies
View Related
Aug 20, 2008
The help says this:
"The drawing status bar displays several tools for scaling annotations." It then shows a diagram with the following buttons: Annotation Scale, Annotation Visibility, and Automatically add scale".
I cannot get the Annotation Scale button to display anywhere.
When I select a viewport I do get the Viewport Scale button but no Annotation Scale button, and it's not listed as an option when I select the Application Status bar menu.
View 9 Replies
View Related
